Materials Science and Technology

Using matrix methods to characterise the evolution of deformation induced surface roughness in aluminium sheet
pp. 253-260(8)
Authors: Stoudt, M.R.; Hubbard, J.B.; Janet, S.A.

MW plasma polymer thin film synthesis using diglyme precursor
pp. 261-265(5)
Authors: Yang, J.; Gao, J.C.

Effect of heating rate on reaustenitisation of low carbon niobium microalloyed steel
pp. 266-272(7)
Authors: Martín, San D.; Cock, de T.; García-Junceda, A.; Caballero, F.G.; Capdevila, C.; de Andrés, C. García

Fracture mechanisms of aluminium cast alloy locally reinforced by SiC particles and Al₂O₃ whiskers under monotonic and cyclic load
pp. 273-280(8)
Authors: Rafiquzzaman, M.D.; Arai, Y.; Tsuchida, E.

Microstructure evolution in hot deformation of 7050 aluminium alloy with coarse elongated grains
pp. 281-286(6)
Authors: Hu, H.E.; Zhen, L.; Chen, J.Z.; Yang, L.; Zhang, B.Y.

Non-conservation of grain volume during diffusion creep
pp. 287-293(7)
Author: Burton, B.

Neural network modelling of flow stress in Ti-6Al-4V alloy with equiaxed and Widmanstätten microstructures
pp. 294-301(8)
Authors: Reddy, N.S.; Park, C.H.; Lee, Y.H.; Lee, C.S.

Robust optimisation of chemical composition of as cast chromium white cast iron using a green sand mould
pp. 302-308(7)
Authors: Cai, A.-H.; Chen, H.; W.-K., AN; Liu, W.-X.; Luo, Y.; Li, T.-L.; Chen, M.

Efficient estimation of thermophysical parameters for LF6 aluminium alloy
pp. 309-313(5)
Authors: Zeng, Z.; Wang, L.J.; Zhang, H.

Effect of boronising on mechanical properties, wear and corrosion of N80 steel
pp. 314-319(6)
Authors: Tian, X.; Lu, Y.; Sun, S.J.; Wang, Z.G.; Hao, W.Q.; Zhu, X.D.; Yang, Y.L.

Microstructural characterisation of as cast and homogenised Mg-Gd-Nd-Zr alloys
pp. 320-326(7)
Authors: Zheng, K.Y.; Dong, J.; Zeng, X.Q.; Ding, W.J.

Residual stress relaxation in shot peened high strength low alloy steel
pp. 327-334(8)
Authors: Turnbull, A.; Pitts, J.J.; Lord, J.D.

Designing low carbon, low temperature bainite
pp. 335-342(8)
Authors: Yang, H.-S.; Bhadeshia, H.K.D.H.

Influence of silicon on cementite precipitation in steels
pp. 343-347(5)
Authors: Kozeschnik, E.; Bhadeshia, H.K.D.H.

On the effect of nickel substitution in duplex stainless steel
pp. 348-355(8)
Authors: Wessman, S.M.; Hertzman, S.; Pettersson, R.; Lagneborg, R.; Liljas, M.

Improvement of wear resistance of hot working tool steel by hardfacing

Synthesis and physicochemical response of polyethylene glycol encapsulated nickel ferrite nanoparticles
pp. 361-368(8)
Authors: Yuan, Q.; Rana, S.; Srivastava, R.S.; Gallo, A.; Misra, R.D.K.

Numerical identification of material model for C-Mn steel using micro-indentation test
pp. 369-375(7)
Authors: Kopernik, M.; Spychalski, M.; Kurzydłowski, K.J.; Pietrzyk, M.

Microstructure and properties of AlTiNiMnB_x high entropy alloys
pp. 376-378(3)
Authors: Li, C.; Li, J.C.; Zhao, M.; Zhang, L.; Jiang, Q.