Materials Science and Technology

Prediction of long term creep data for forged 1Cr-1Mo-0·25V steel
pp. 1-9(9)
Authors: Wilshire, B.; Scharning, P.J.

Hardness improvement of surface alloyed materials fabricated with Fe based metamorphic powders by high energy electron beam irradiation
pp. 10-14(5)
Authors: Nam, D.H.; Lee, K.; Lee, S.; Kim, C.P.

High strain rate deformation of Ti-15Mo-5Zr-3Al alloy over wide temperature range
pp. 15-25(11)
Authors: Lee, W.S.; Lin, C.F.; Chen, T.H.; Hwang, H.H.

Formation of fine grained globular microstructures during isothermal annealing of PM T42 high speed steel: role of nanometric proeutectoid carbides
pp. 26-32(7)
Authors: Trabadelo, V.; Iturriza, I.

Role of zinc coat in friction stir lap welding Al and zinc coated steel
pp. 33-39(7)
Authors: Chen, Y.C.; Komazaki, T.; Tsumura, T.; Nakata, K.

Continuous separation of Fe-Al-Zn dross phase from hot dip galvanised melt using alternating magnetic field
pp. 40-44(5)
Authors: Dong, A.P.; Shu, D.; Wang, J.; Cai, X.C.; Sun, B.D.; Cui, J.; Shen, J.G.; Ren, Y.S.; Yin, X.D.

Soft magnetic properties and microstructure of novel Nb poor Finemet type alloys
pp. 45-48(4)
Authors: Liu, H.S.; Yin, C.H.; Miao, X.X.; Han, Z.D.; Wang, D.H.; Du, Y.W.

Deformation behaviour in superplastic 5083 Al alloy during biaxial gas pressure forming with lubrication
pp. 49-54(6)
Authors: Chen, H.H.; Wu, H.Y.; Lee, W.S.; Lee, S.

Efficient refinement of spherical grains by LSPSF rheocasting process
pp. 55-63(9)
Authors: Guo, H.M.; Yang, X.J.

SEM/EBSD based in situ studies of deformation induced phase transformations in supermartensitic stainless steels
pp. 64-72(9)
Authors: Karlsen, M.; Hjelen, J.; Grong, .; Rørvik, G.; Chiron, R.; Schubert, U.; Nilsen, E.

Characteristics of multilayer laser cladding using powder mixture of Co based alloy and vanadium carbide
pp. 73-84(12)
Authors: Xu, G.J.; Kutsuna, M.

Fabrication and microstructural investigations of porous ceramic particle/polymer matrix composites
pp. 85-89(5)
Authors: Sharif, M.A.; Sueyoshi, H.

Development of microstructure and mechanical properties of as cast Al-Mg-Mn alloy during high temperature ECAP
pp. 90-96(7)
Authors: Ning, J.L.; Jiang, D.M.

Mechanical and hardness evaluations of Fe-18Cr-18Mn alloys
pp. 97-99(3)
Authors: Rawers, J.; Duttlinger, N.

Improvement of grain structure and mechanical properties of a land based gas turbine blade directionally solidified with liquid metal cooling process
pp. 100-106(7)
Authors: Kermanpur, A.; Mehrara, M.; Varahram, N.; Davami, P.

Understanding the complexities of bake hardening
pp. 107-111(5)
Authors: Das, S.; Singh, S.B.; Mohanty, O.N.; Bhadeshia, H.K.D.H.

Understanding the low temperature end of the hot ductility trough in steels
pp. 112-120(9)
Author: Mintz, B.

Size effect on strength of alumina agglomerates
pp. 121-123(3)
Authors: Wu, D.F.; Zhou, J.C.; Li, Y.D.

Effect of B/N ratio on plastic anisotropy behaviour in low carbon aluminium killed steel
pp. 124-126(3)
Authors: Deva, A.; De, S.K.; Jha, B.K.