Materials Science and Technology

Structural Integrity Symposium
pp. 1261-1261(1)
Author: Knott, John

Statistical analysis of phosphorus segregation on intergranular fracture facets in pressure vessel steels
pp. 1262-1268(7)
Authors: Wu, S.J.; Ding, R.G.; Knott, J.F.

A critical shear displacement criterion for ductile-brittle transition under mixed mode I and II loading
pp. 1269-1277(9)
Authors: Bhattacharjee, D.; Knott, J.F.

Effect of grain size on austenite stability and room temperature low cycle fatigue behaviour of solution annealed AISI 316LN austenitic stainless steel
pp. 1278-1284(7)
Authors: Basu, K.; Das, M.; Bhattacharjee, D.; Chakraborti, P.C.

Ductile fracture behaviour of primary heat transport piping material
pp. 1285-1293(9)
Authors: Tarafder, S.; Sivaprasad, S.; Ray, K.K.

Hot cracking in tungsten inert gas welding of magnesium alloy AZ91D
pp. 1294-1299(6)
Authors: Zhou, W.; Long, T.Z.; Mark, C.K.

MicroRaman spectroscopy of protective coatings deposited onto C/C-SiC composites
pp. 1300-1304(5)
Authors: Perova, T.S.; Moore, R.A.; Berreth, K.; Maile, K.; Lyutovich, A.

Coupled model for particle dissolution and coarsening in microalloyed steels
pp. 1305-1308(4)
Authors: Wang, H.R.; Wang, W.

Development of nano-ZrO₂ reinforced magnesium nanocomposites with significantly improved ductility
pp. 1309-1312(4)
Authors: Hassan, S.F.; Tan, M.J.; Gupta, M.

Microstructural and textural evolution during large strain hot rolling (LSR) of Mg-Al (AZ31) alloy
pp. 1313-1320(8)
Authors: Srinivasan, A.; Ghosh Chowdhury, S.; Srivastava, V.C.; Swaminathan, J.; Poddar, P.; De, P.K.

Influence of austenitising and austempering temperatures on microstructure and properties of dual phase ADI
pp. 1321-1326(6)
Authors: Basso, A.D.; Martínez, R.A.; Sikora, J.A.

Role of grain refining in hot cracking and macrosegregation in direct chill cast AA 7075 billets
pp. 1327-1335(9)
Authors: Nadella, R.; Eskin, D.; Katgerman, L.

Damping properties of open cell microcellular pure Al foams
pp. 1336-1340(5)
Authors: Yang, Y.J.; Han, F.S.; Wen, C.E.; Shu, Y.F.

Modelling influence of particulate shape on damping capacity of Al/SiC(p) composite
pp. 1341-1345(5)
Authors: Wang, J.C.; Yang, G.C.

Influence of fissures on tensile and fracture toughness of steels with ferrite/pearlite microstructures
pp. 1346-1356(11)
Authors: Mintz, B.; Morrison, W.B.

Influence of Al and P additions on hot ductility of steels
pp. 1357-1366(10)
Authors: Su, H.; Gunawadarna, W.D.; Tuling, A.; Mintz, B.

A model based creep equation for 9Cr-1Mo-0·2V (P91 type) steel
pp. 1367-1374(8)
Authors: Ule, B.; Nagode, A.

Mechanical properties of directly air cooled copper added microalloyed steels
pp. 1375-1380(6)
Authors: Ghosh, S.K.; Haldar, A.; Chattopadhyay, P.P.

Characterisation of microstructural evolution during thermomechanical processing of 15Cr-15Ni-2·2Mo-Ti modified austenitic stainless steel (alloy D9) using ultrasonic measurements
pp. 1381-1386(6)
Authors: Mandal, S.; Kumar, A.; Sivaprasad, P.V.; Jayakumar, T.; Raj, B.