Materials Science and Technology

Residual stress and thermal cycling of planar solid oxide fuel cells
pp. 1135-1143(9)
Authors: Atkinson, A.; Sun, B.

Examination of breakdown stress in creep by viscous glide in Al-5·5 at.-%Mg solid solution alloy at high stress levels
pp. 1144-1148(5)
Authors: Graiss, G.; El-Rehim, A. F. Abd

Intergranular liquation cracking in heat affected zone of a welded nickel based superalloy in as cast condition
pp. 1149-1155(7)
Author: Ojo, O.A.

Effect of rare earth Yb addition on mechanical properties of Al-5·3Cu-0·8Mg-0·6Ag alloy
pp. 1156-1160(5)
Authors: Xiao, D.H.; Song, M.; Chen, K.H.; Huang, B.Y.

Formation of intermetallic compounds with Sn-Zn-Al solder on copper and electroless nickel-immersion gold substrates
pp. 1161-1166(6)
Authors: Snugovsky, L.; Snugovsky, P.; Perovic, D.D.; Rutter, J.W.

Mechanical properties of diffusion bonded joints between titanium and stainless steel with nickel interlayer
pp. 1167-1172(6)
Authors: Kundu, S.; Chatterjee, S.

The deformation, recrystallisation and texture of three magnesium alloy extrusions
pp. 1173-1180(8)
Authors: Mackenzie, L.W.F.; Davis, B.; Humphreys, F.J.; Lorimer, G.W.

Synthesis of polypropylene wrapped carbon nanotubes composite via in situ graft method with maleic anhydride
pp. 1181-1185(5)
Authors: Li, W.H.; Chen, X.H.; Li, S.N.; Xu, L.S.; Yang, Z.

Strengthening and fracture mechanisms in warm forged microalloyed medium carbon steel
pp. 1186-1194(9)
Authors: Zhao, P.; Boyd, J.D.

Superplastic deformation of Ti₃Al based alloy
pp. 1195-1198(4)
Authors: Liu, Y.Y.; Yao, Z.K.; Guo, H.Z.; Gao, J.

Critical study of microforging Au ball on Al coated silicon substrate using finite element method
pp. 1199-1207(9)
Author: Srikanth, N.

Comparative studies on wear behaviour between as cast AZ91 and Mg₉₇Zn₁Y₂ magnesium alloys
pp. 1208-1214(7)
Authors: An, J.; Li, R.G.; Chen, C.M.; Xu, Y.; Chen, X.; Guo, Z.X.; Liu, Y.B.

Tensile deformation behaviour of AISI 316L(N) SS
pp. 1215-1222(8)
Authors: Shastry, C. Girish; Mathew, M.D.; Sankara Rao, K.B.h.a.n.u.; Pathak, S.D.

Correlation between substrate steel texture and coating texture of two industrially produced galvanised and galvannealed steels
pp. 1223-1227(5)
Authors: Chakraborty, A.; Ray, R.K.; Bhattacharjee, D.

Hydroxyapatite nanospindles by biomimetic synthesis with chitosan as template
pp. 1228-1232(5)
Authors: He, D.; Xiao, X.F.; Liu, F.; Liu, R.F.

Dynamic adjustment of ferrite grains during dynamic strain induced transformation
pp. 1233-1242(10)
Authors: Shokouhi, A.; Hodgson, P.D.

Dependence of phase composition on dry sliding behaviour in nanocomposite TiB_xN_y thin films
pp. 1243-1248(6)
Authors: Lu, Y.H.; Wang, J.P.; Shen, Y.G.

Use of brazing technique for manufacturing of high temperature fibre optical temperature and displacement transducer
pp. 1249-1255(7)
Authors: Sandlin, S.; Kosonen, T.; Hokkanen, A.; Heikinheimo, L.

Effects of synthesis technology route on mechanical properties and phases/microstructures of polyurethane elastomers
pp. 1256-1259(4)
Authors: Zhang, H.B.; Li, W.; Kong, X.; Yang, X.J.