Materials Science and Technology

Quantitative metallography of deformed grains
pp. 757-766(10)
Authors: Zhu, Q.; Sellars, C.M.; Bhadeshia, H.K.D.H.

Electrical sliding wear property of Al₂O₃ particle reinforced Cu-Cr-Zr matrix composite
pp. 767-770(4)
Authors: Zhan, Y.Z.; Wang, Y.; Yu, Z.W.; Xu, Y.F.; Xie, H.F.; Shi, X.B.

Effects of dilution on microstructure and wear behaviour of NiCr hardface deposits
pp. 771-779(9)
Authors: Das, C.R.; Albert, S.K.; Bhaduri, A.K.; Nithya, R.

Conversion between non-isothermal and isothermal transformation kinetics of γ to α for C-Mn and Nb microalloyed steels
pp. 780-786(7)
Authors: Jia, T.; Liu, Z.Y.; Yuan, X.Q.; Liu, X.H.; Wang, G.D.

Injection moulding of alumina with partially water soluble binder system and solvent debinding kinetics
pp. 787-791(5)
Author: Bakan, H.I.

Characterisation of FR-4 substrate with various plasma treatment conditions
pp. 792-798(7)
Authors: Noh, B.I.; Jung, S.B.

Division of character zones and elements distribution of Fe₃Al/Cr-Ni alloy fusion bonded joint
pp. 799-802(4)
Authors: Ma, H.J.; Li, Y.J.; Li, J.N.; Wang, J.

Piercing/extrusion and FSW nugget microstructure formation in Al alloys
pp. 803-809(7)
Authors: McQueen, H.J.; Cabibbo, M.; Evangelista, E.

Effect of microstructural variables on tensile behaviour of A356 cast aluminium alloy
pp. 810-814(5)
Authors: Hong, S.J.; Kim, S.S.; Lee, J.H.; Kwon, Y.N.; Lee, Y.S.

Microstructure and phase constitution near interface of Cu/Al vacuum brazing
pp. 815-818(4)
Authors: Xia, C.Z.; Li, Y.J.; Wang, J.; Ma, H.J.

δ TRIP steel
pp. 819-827(9)
Authors: Chatterjee, S.; Murugananth, M.; Bhadeshia, H.K.D.H.

Mechanical strength of chip scale package with various underfills under accelerated thermal condition
pp. 828-832(5)
Authors: Noh, B.I.; Lee, B.Y.; Jung, S.B.

Simple model for carbonitride dissolution in microalloyed steels
pp. 833-838(6)
Authors: Wang, H.R.; Wang, W.

Synthesis of TiB₂ metal matrix composite on plain steel substrate: microstructure and wear properties
pp. 839-846(8)
Authors: Darabara, M.; Papadimitriou, G.D.; Bourithis, L.

Melt flow velocity in high pressure die casting: its effect on microstructure and mechanical properties in an Al-Si alloy
pp. 847-856(10)
Authors: Gunasegaram, D.R.; Finnin, B.R.; Polivka, F.B.

Investigation of radiation damage to microcapsules in environmental SEM
pp. 857-864(8)
Authors: Ren, Y.L.; Donald, A.M.; Zhang, Z.B.

Improved properties of SrFe₁₂O₁₉ synthesised by gel self-propagating combustion technique with glycol as solvent
pp. 865-868(4)
Authors: Pan, X.F.; Mu, G.H.; Chen, N.; Gan, K.K.; Yang, K.; Gu, M.Y.

Resin transfer moulded silica fibre/phenolics composites fabricated via solution impregnation route
pp. 869-874(6)
Authors: Wang, B.C.; Huang, Y.D.; Chen, P.; Gao, Y.

Joining of MoSi₂ to 316L stainless steel using spark plasma sintering technique
pp. 875-879(5)
Authors: Xu, J.F.; Zhang, X.B.; Fei, Y.J.; Wu, H.F.; Ye, Y.F.; Li, W.

Polymer derived nitride matrix composites reinforced by 2·5-dimensional silica fibre
pp. 880-882(3)
Authors: Jiang, Y.G.; Zhang, C.R.; Cao, F.; Wang, S.Q.; Qi, G.J.; Cao, Y.B.