Materials Science and Technology

Triple junction energy and prospects for measuring it
pp. 505-508(4)
Author: King, A.H.

Dispersion strengthening in vanadium microalloyed steels processed by simulated thin slab casting and direct charging Part 1 - Processing parameters, mechanical properties and microstructure
pp. 509-518(10)
Authors: Li, Y.; Wilson, J.A.; Craven, A.J.; Mitchell, P.S.; Crowther, D.N.; Baker, T.N.

Dispersion strengthening in vanadium microalloyed steels processed by simulated thin slab casting and direct charging Part 2 - Chemical characterisation of dispersion strengthening precipitates
pp. 519-527(9)
Authors: Wilson, J.A.; Craven, A.J.; Li, Y.; Baker, T.N.

Use of titanium and zirconium in centrifugally cast heat resistant steel
pp. 528-534(7)
Authors: Caballero, F.G.; Imizcoz, P.; Lopez, V.; Alvarez, L.F.; de Andrés, C. García

Effects of quench aging treatment on microstructure and tensile properties of thixoformed ZA27 alloy
pp. 535-541(7)
Authors: Chen, T.J.; Hao, Y.; Li, Y.D.

Thermal expansion characteristic of Ni_53·6Mn_27·1Ga_19·3 alloy with columnar structure
pp. 542-546(5)
Authors: Rudajevová, A.; Frost, M.; Jäger, A.

Effect of preweld microstructure on HAZ liquation cracking of Rene 80 superalloy
pp. 547-555(9)
Authors: Shahsavari, H.A.; Kokabi, A.H.; Nategh, S.

Uncertainties in dilatometric determination of martensite start temperature
pp. 556-560(5)
Authors: Yang, Hong-Seok; Bhadeshia, H.K.D.H.

Aging response and strength formability parameters of hot rolled copper alloyed interstitial free steel
pp. 561-566(6)
Authors: Rana, R.; Bleck, W.; Singh, S.B.; Mohanty, O.N.

Modelling hot plane strain compression test Part 3 - Effect of asymmetric conditions
pp. 567-576(10)
Authors: Mirza, M.S.; Sellars, C.M.

Interface morphology of nanosized Si embedded in Al matrix
pp. 577-581(5)
Authors: Zhao, M.; Jiang, Q.; Xu, B.S.

FEM analysis to predict development of structure during extrusion and subsequent solution soak cycle
pp. 582-592(11)
Authors: Flitta, I.; Sheppard, T.; Peng, Z.

Effects of platinum concentration on combustion synthesis of NiAl: application in repairing Ni based superalloys
pp. 593-599(7)
Authors: De Jouvancourt, H.; Record, M.C.; Marin-Ayral, R.M.

Characterisation of lead pipes used in the water industry: extrusion processing, alloy microstructure and their role in service failures
pp. 600-605(6)
Authors: Starling, N.; Belmonte, H.M.S.; Shepherd, M.A.; Mulheron, M.J.; Smith, P.A.

Stretch-flangeability of strong multiphase steels
pp. 606-609(4)
Authors: Chatterjee, S.; Bhadeshia, H.K.D.H.

Mechanical stabilisation of eutectoid steel
pp. 610-612(3)
Authors: Maalekian, M.; Kozeschnik, E.; Chatterjee, S.; Bhadeshia, H.K.D.H.

Effect of Ti, W, Mn, Mo and Si on microstructure and mechanical properties of high carbon Fe-10·5 wt-%Al alloy
pp. 613-619(7)
Authors: Baligidad, R.G.; Prasad, V. V. Satya; Rao, A. Sambasiva

Effect of superimposed oscillations on creep behaviour of Al - 2 4·.5Cu and Al - 2 4·5Cu - 2 0·1In (wt-%) alloys containing θ′ precipitates
pp. 620-626(7)
Author: El-Rehim, A. F. Abd

Microstructure of WC in WC-Co cemented carbides consolidated by electric discharge
pp. 627-629(3)
Authors: Wu, X.Y.; Zhang, W.; Li, D.X.; Guo, J.D.

Corrigendum
pp. 630-630(1)