Materials Science and Technology

Development of biodegradable scaffolds for tissue engineering: a perspective on emerging technology
pp. 379-391(13)
Authors: Liu, C.Z.; Czernuszka, J.T.

Kinetics of spherodisation, coalescence and coarsening of lead inclusions in aluminium
pp. 392-394(3)
Author: Jones, H.

Effect of predeformation on microstructure and mechanical properties of Al-Cu-Li-Zr alloy containing Sc
pp. 395-399(5)
Authors: Liang, W.J.; Pan, Q.L.; He, Y.B.; Zhu, Z.M.; Liu, Y.F.

Effect of heterogeneous deformation on precipitate distribution in Al-3·7Cu and Al-3·8Cu-1·8Mg alloys
pp. 400-406(7)
Authors: Blaz, L.; Piela, K.

Effect of ECAP and annealing treatment on ε martensite and damping capacity of Fe-18·39Mn alloy
pp. 407-410(4)
Authors: Huang, S.K.; Wen, Y.H.; Li, N.; Ding, S.; Teng, J.

Effect of high temperature storage test on reliability of eutectic Sn-Cu/ENIG solder joint
pp. 411-416(6)
Authors: Yoon, J.W.; Kim, S.W.; Jung, S.B.

Effect of Nb on dynamic strain induced austenite to ferrite transformation
pp. 417-422(6)
Authors: Rios, P.R.; de S. Bott, I.; Santos, D.B.; de Melo, T.M.F.; Ferreira, J.L.

Dual phase versus TRIP strip steels: comparison of dynamic properties for automotive crash performance
pp. 423-431(9)
Authors: Oliver, S.; Jones, T.B.; Fourlaris, G.

Formation of microstructure in Ag-In-Sn solder alloys
pp. 432-437(6)
Authors: Snugovsky, L.; Snugovsky, P.; Perovic, D.D.; Rutter, J.W.

Novel sloping plate process for semisolid metal forming
pp. 438-443(6)
Authors: Guan, R.G.; Wang, C.; Xing, Z.H.; Lee, C.S.; Hu, F.Y.

Influence of thermomechanical processing on superplastic forming of Mg-Al alloys
pp. 444-450(7)
Authors: Pérez-Prado, M.T.; del Valle, J.A.; Salort, F.; Peñalba, F.; Gómez, X.; Ruano, O.A.

Artificial neural network modelling of solidification mode in austenitic stainless steel welds
pp. 451-459(9)
Authors: Vasudevan, M.; Bhaduri, A.K.; Raj, Baldev; Rao, K. Prasad

Investigation of quenching effect on mechanical property and abrasive wear behaviour of high boron cast steel
pp. 460-465(6)
Authors: Fu, H.G.; Wu, Z.W.; Xing, J.D.

Characterisation and formation of boundary in laser cladding AZ91D with Al + Al₂O₃
pp. 466-470(5)
Authors: Yao, J.; Sun, G.P.; Lin, W.G.; Liu, C.; Mao, G.L.

Investigation on patterned structures formed on p-type silicon and its morphological dependence on current density
pp. 471-474(4)
Authors: Balakrishnan, S.; Gun'ko, Y.K.; Perova, T.S.; Patrick, J.; Moore, R.A.

Analysis of solidification in Bridgman furnace as simulation of DC casting of aluminium alloy slabs
pp. 475-482(8)
Authors: Jaradeh, M.; Carlberg, T.

Varying velocity scan in laser forming of plates
pp. 483-486(4)
Authors: Shen, H.; Zhou, J.; Shi, Y.J.; Yao, Z.Q.; Hu, J.

Liquid composite moulding of fibre nanocomposites
pp. 487-491(5)
Authors: Lekakou, C.; Hearn, A.; Murugesh, A.K.; Le Page, B.

Damping properties of porous AZ91 magnesium alloy reinforced with copper particles
pp. 492-496(5)
Authors: Hao, G.L.; Han, F.S.; Wu, J.; Wang, X.F.

Determination of mechanical adhesion energy of thermal oxide scales on AISI 430Ti alloy using tensile test
pp. 497-501(5)
Authors: Chandra-Ambhorn, S.; Roussel-Dherbey, F.; Toscan, F.; Wouters, Y.; Galerie, A.; Dupeux, M.

Compressive behaviour of open cell Al-Al₂O₃ composite foams fabricated by sintering and dissolution process
pp. 502-504(3)
Authors: Yang, Y.J.; Han, F.S.; Yang, D.K.; Zheng, K.