Materials Science and Technology

Tensile and fatigue properties of 6063-T6 aluminium alloy coated with electroless Ni-P deposit
pp. 253-263(11)
Authors: Piñeiro-Jiménez, A.; Villalobos-Gutiérrez, C.; Staia, M.H.; Puchi-Cabrera, E.S.

Thermal cycling of EB-PVD/NiCoCrAlYHf thermal barrier coatings
pp. 264-269(6)
Authors: Xu, Q.G.; Lu, F.; Wu, X.R.

Solidification characteristics of newly developed die cast magnesium alloy MRI153M
pp. 270-275(6)
Authors: Aghion, E.; Moscovitch, N.; Arnon, A.

Analysis of local microstructure and hardness of 13 mm gauge 2024-T351 AA friction stir welds
pp. 276-284(9)
Authors: Booth, D.P.P.; Starink, M.J.; Sinclair, I.

Continuous compaction of spray deposited Al-20 wt-%Si/SiC_P composites via wedge pressing technique
pp. 285-289(5)
Authors: Chen, Z.H.; Teng, J.; Yan, H.G.; Chen, D.

Mechanical behaviour and texture of annealed AZ31 Mg alloy deformed by ECAP
pp. 290-296(7)
Authors: Su, C.W.; Lu, L.; Lai, M.O.

Influence of solidification conditions on grain boundary cohesion in the mushy zone during directional solidification of nickel base superalloy
pp. 297-302(6)
Authors: Zhou, Y.Z.; Volek, A.

Influence of ZnO buffer layer thickness on electrical and optical properties of GZO thin films deposited on polymer substrates
pp. 303-306(4)
Authors: Kim, S.; Lee, W.; Lee, C.

Studies on photocatalytic degradation of polystyrene
pp. 307-314(8)
Authors: Bandyopadhyay, A.; Basak, G. Chandra

Artificial neural network prediction on wear properties of high vanadium high speed steel (HVHSS) rolls
pp. 315-319(5)
Authors: Xu, L.J.; Xing, J.D.; Wei, S.Z.; Zhang, Y.Z.; Long, R.

Microstructure of alumina ceramic/Ag-Cu-Ti brazing alloy/Kovar alloy joint
pp. 320-323(4)
Authors: Wang, Y.; Feng, J.C.; Zhang, L.X.; He, P.; Zhang, J.H.

Fatigue of continuous cast AA5754 Al alloy sheet
pp. 324-332(9)
Authors: Li, J.X.; Wen, X.Y.; Man, C.S.; Zhai, T.

Investigation into manufacturing Fe-Cu-C alloy parts through indirect selective laser sintering
pp. 333-337(5)
Authors: Zhang, J.; Shi, Y.S.; Liu, J.H.; Chen, K.H.; Huang, S.H.

Strain induced transformation of retained austenite in TRIP aided steels: a neural network model
pp. 338-346(9)
Authors: Mukherjee, M.; Singh, S.B.; Mohanty, O.N.

Origin of fissures on fracture surfaces of impact samples of HSLA steels with ferrite/pearlite microstructures
pp. 347-354(8)
Authors: Mintz, B.; Maina, E.; Morrison, W.B.

A comparative study of low temperature plasma nitriding, carburising and nitrocarburising of AISI 410 martensitic stainless steel
pp. 355-361(7)
Authors: Li, C.X.; Bell, T.

Piezoresistive effect in amorphous carbon thin films
pp. 362-367(6)
Authors: Tibrewala, A.; Peiner, E.; Bandorf, R.; Biehl, S.; Lüthje, H.

Effect of temperature on formation of reaction products and strength properties of titanium and stainless steel joints using copper interlayer
pp. 368-373(6)
Authors: Kundu, S.; Chatterjee, S.

Effects of particle size on deformation behaviour of metal matrix composites
pp. 374-378(5)
Authors: Yan, Y.W.; Geng, L.