Materials Science and Technology

Gasars: a class of metallic materials with ordered porosity
pp. 1135-1147(13)
Authors: Drenchev, L.; Sobczak, J.; Malinov, S.; Sha, W.

Glass ceramics of high hardness and fracture toughness developed from steel fly ash
pp. 1148-1154(7)
Authors: Boccaccini, A.R.; Han, W.X.; Dimech, C.; Rawlings, R.D.

Numerical modelling of small disc creep test
pp. 1155-1162(8)
Authors: Evans, R.W.; Evans, M.

Neural network model for improvement of strength-ductility compromise in low carbon sheet steels
pp. 1163-1170(8)
Authors: Capdevila, C.; Garcia-Mateo, C.; Caballero, F.G.; de Andrés, C. García

Simulation of rolling deformation texture of fcc metals with crystal plasticity finite element model
pp. 1171-1176(6)
Authors: Tang, J.G.; Zhang, X.M.; Chen, Z.Y.; Deng, Y.L.

Low temperature aluminisation of alloy steels by pack cementation process
pp. 1177-1184(8)
Authors: Xiang, Z.D.; Datta, P.K.

Influence of laser surface alloying with chromium and nickel on corrosion resistance of type 304L stainless steel
pp. 1185-1192(8)
Authors: Mudali, U. Kamachi; Kaul, R.; Ningshen, S.; Ganesh, P.; Nath, A.K.; Khatak, H.S.; Raj, Baldev

Process parameter selection for optimising weld bead geometry in stainless steel cladding using Taguchi's approach
pp. 1193-1200(8)
Authors: Palani, P.K.; Murugan, N.; Karthikeyan, B.

Effect of bonding temperature on interface microstructure and properties of titanium-304 stainless steel diffusion bonded joints with Ni interlayer
pp. 1201-1207(7)
Authors: Kundu, S.; Chatterjee, S.

Influence of annealing on microstructures, mechanical and creep properties of Mg-4Al-2Sr alloy
pp. 1208-1212(5)
Authors: Bai, J.; Sun, Y.S.; Xue, F.; Xue, S.; Qiang, J.; Zhu, T.B.

Influence of Si, Ca and Ag addition on corrosion behaviour of new wrought Mg-Zn alloys
pp. 1213-1218(6)
Authors: Ben-Hamu, G.; Eliezer, D.; Shin, K.S.

Effect of prior cold working on microstructural evolution of precipitation in Zn-22Al-2Cu alloy during aging
pp. 1219-1222(4)
Authors: Dorantes-Rosales, H.J.; López-Hirata, V.M.; Saucedo-Muñoz, M.L.; Hernández-Santiago, F.; Esquivel-Gonzalez, R.

Damping capacity associated with precipitation in Mg₂Si/Mg-9Al composite materials
pp. 1223-1226(4)
Authors: Liao, L.H.; Wang, H.W.; Li, X.F.; Zhang, X.Q.; Ma, N.H.

Study of reaction process on Ni/4H-SiC contact
pp. 1227-1234(8)
Authors: Cao, Y.; Nyborg, L.; Yi, D.Q.; Jelvestam, U.

Effect of thermal characteristics of commercial and special polyacrylonitrile fibres on the fabrication of carbon fibres
pp. 1235-1239(5)
Authors: Shokuhfar, A.; Sedghi, A.; Farsani, R. Eslami

Preparation and characterisation of fluorescent polystyrene spheres coated with different sized quantum dots
pp. 1240-1244(5)
Authors: Chu, M.Q.; Sun, Y.; Liu, G.J.

Synthesis and characterisation of cerium-samarium mixed oxide nanorods
pp. 1245-1248(4)
Authors: Bugayeva, N.; Robinson, J.

Structural, thermal, dielectric studies on sol-gel derived MgO from non-alkoxide route
pp. 1249-1254(6)
Authors: Chowdhury, A.; Kumar, J.

Effect of B content on thermal stability of nanocomposite Ti-B-N thin films
pp. 1255-1260(6)
Authors: Lu, Y.H.; Shen, Y.G.; Zhou, Z.F.; Li, K.Y.; Chen, H.