Materials Science and Technology

Deformation structures: evolution and properties
pp. 1363-1363(1)
Authors: Pantleon, Wolfgang; Horsewell, Andy

Recrystallisation kinetics: from statics to dynamics and from 2D to 3D
pp. 1365-1372(8)
Author: Juul Jensen, D.

Towards atomic level simulations of recrystallisation - setting up suitable geometry
pp. 1373-1375(3)
Authors: Godiksen, R.B.; Trautt, Z.T.; Upmanyu, M.; Schmidt, S.; Juul Jensen, D.

3D grainmap generation with the algebraic reconstruction technique from 3DXRD data
pp. 1376-1378(3)
Author: Knudsen, E.

Precise determination of extended dislocation boundary plane in transmission electron microscopy
pp. 1379-1382(4)
Author: Huang, X.

Grain orientation dependence on distance to surface of CVD diamond film
pp. 1383-1386(4)
Authors: Mao, W.; Zhu, H.; Chen, L.; Feng, H.; Lü, F.

Study on texture of Ni-W substrates for high temperature superconductors
pp. 1387-1391(5)
Authors: Liu, D.M.; Hao, F.; Li, M.J.; Hu, Y.C.; Gao, F.; Zhou, M.L.

Retrieving orientation correlations in deformation structures from orientation maps
pp. 1392-1396(5)
Author: Pantleon, W.

Characterisation of orientation distributions of individual grains within deformed metals
pp. 1397-1400(4)
Authors: Poulsen, H.F.; Lienert, U.; Pantleon, W.

Grain subdivision in polycrystalline copper subject to tensile deformation
pp. 1401-1406(6)
Authors: Wert, J.A.; Thorning, C.T.

Recrystallisation kinetics of aluminium AA1200 cold rolled to true strain of 2
pp. 1407-1411(5)
Authors: Wu, G.; Juul Jensen, D.

Crystal structures and textures of hot forged Ni₄₈Mn₃₀Ga₂₂ alloy investigated by neutron diffraction technique
pp. 1412-1416(5)
Authors: Cong, D.Y.; Wang, Y.D.; Zetterström, P.; Peng, R.L.; Delaplane, R.; Zhao, X.; Zuo, L.

Influence of grain orientation on twinning during warm compression of wrought Mg-3Al-1Zn
pp. 1417-1422(6)
Authors: Jiang, J.; Godfrey, A.; Liu, Q.

Flow stress anisotropy and hardening parameters
pp. 1423-1427(5)
Authors: Hansen, N.; Li, Z.J.; Winther, G.

Plastic strain measurements: from 2D to 3D
pp. 1428-1431(4)
Authors: Haldrup, K.; Nielsen, S.F.; Beckmann, F.; Wert, J.A.

Increasing cube texture in high purity aluminium foils for capacitors
pp. 1432-1435(4)
Authors: Pan, F.S.; Peng, J.; Tang, A.T.; Lu, Y.

Microtexture evolution of partially recrystallised interstitial free steel
pp. 1436-1439(4)
Authors: He, T.; Liu, Y.D.; Jiang, Q.W.; Wang, G.; Wang, Y.D.; Zuo, L.

High strength Al₂O_3p/2024Al composites - effect of particles, subgrains and precipitates
pp. 1440-1443(4)
Authors: Luan, B.F.; Wu, G.H.; Liu, W.; Hansen, N.; Lei, T.Q.

Microstructural and textural analyses of flip chip bonded gold by orientation mapping
pp. 1444-1449(6)
Authors: Yang, P.; Li, C.M.; Liu, D.M.; Hung, M.; Li, M.; Meng, L.

Dislocation patterning during crystal growth of semiconductor compounds (GaAs)
pp. 1450-1454(5)
Authors: Frank-Rotsch, C.h.; Juda, U.; Kiessling, F.M.; Rudolph, P.

Numerical simulation of residual stress in brazing joint between cemented carbide and steel
pp. 1455-1459(5)
Authors: Zhang, J.; Jin, L.Y.

Effects of strain on the microstructure-hardness annealing response of highly deformed Al-0·13Mg
pp. 1460-1465(6)
Author: Bowen, J.R.

Hot compressive deformation behaviour and microstructural variation of TA15 titanium alloy
pp. 1466-1470(5)
Authors: Wang, Y.; Zhu, J.C.; Lai, Z.H.; Cao, X.

Effect of grain orientation on microstructures of aluminium in warm tension
pp. 1471-1475(5)
Authors: He, Y.; Huang, X.; Hansen, N.; Winther, G.

Image analysis for X-ray studies of the dynamics of individual embedded subgrains during recovery
pp. 1476-1479(4)
Authors: Gundlach, C.; Schmidt, S.; Margulies, L.; Knudsen, T.; Pantleon, W.; Poulsen, H.F.