Materials Science and Technology

Influential microstructural changes on rolling contact fatigue crack initiation in pearlitic rail steels
pp. 623-629(7)
Authors: Eden, H.C.; Garnham, J.E.; Davis, C.L.

Use of powder metallurgy preforms as alternative to produce bimetallic tubes
pp. 630-640(11)
Authors: Krishna, B. Vamsi; Venugopal, P.; Rao, K. Prasad

Corrosion fatigue characterisation of sintered multiphase stainless steels
pp. 641-647(7)
Authors: Felli, F.; Scicutelli, A.; Ippati, L.; Fedrizzi, L.; Molinari, A.

Material flow during the extrusion of simple and complex cross-sections using FEM
pp. 648-656(9)
Authors: Flitta, I.; Sheppard, T.

Direct fractographic and microstructural evaluation of different zones within welded dissimilar steel joints
pp. 657-664(8)
Author: Pan, C.

Morphology and constitution of the phases in as-welded microstructure of austempered ductile iron
pp. 665-670(6)
Authors: Li, D.Y.; Zhou, Z.F.; Sun, D.Q.

Process development and photocatalytic property of nanofluid prepared by combined ASNSS
pp. 671-677(7)
Authors: Chang, H.; Jwo, C.S.; Lo, C.H.; Su, C.; Tsung, T.T.; Chen, L.C.; Lin, H.M.; Kao, M.J.

Phase transformation during aging and resulting mechanical properties of two Ti-Nb-Ta-Zr alloys
pp. 678-686(9)
Authors: Li, S.J.; Yang, R.; Niinomi, M.; Hao, Y.L.; Cui, Y.Y.; Guo, Z.X.

Quench factor analysis of aluminium alloys using the Jominy end quench technique
pp. 687-692(6)
Authors: Dolan, G.P.; Flynn, R.J.; Tanner, D.A.; Robinson, J.S.

Effect of strain path change on recrystallisation in copper
pp. 693-700(8)
Authors: McDonald, D.T.; Bate, P.S.; Hutchinson, W.B.

Tensile creep behaviour of coarse grained copper foils at high homologous temperatures and low stresses
pp. 701-707(7)
Authors: Srivastava, V.; McNee, K.R.; Jones, H.; Greenwood, G.W.

Effect of texture evolution on tensile properties of Al-Ni eutectic alloy fabricated by equal channel angular pressing
pp. 708-714(7)
Authors: Zhang, Z.G.; Watanabe, Y.; Kim, I.

Structural aspects of annealing and hot deformation of Al-Nb₂O₅ mechanically alloyed composite
pp. 715-721(7)
Authors: Blaz, L.; Kaneko, J.; Sugamata, M.; Sierpinski, Z.; Tumidajewicz, M.

Grain refining mechanism in Mg-9Gd-4Y alloys by zirconium
pp. 722-726(5)
Authors: Peng, Z.K.; Zhang, X.M.; Chen, J.M.; Xiao, Y.; Jiang, H.

Low pressure lost foam process for casting magnesium alloys
pp. 727-734(8)
Authors: Fan, Z.T.; Ji, S.

Effect of some alloying elements on boiling point of magnesium
pp. 735-738(4)
Authors: Liu, S.H.; Liu, X.J.; Liu, B.; Liu, L.M.; Jin, W.Z.; Hu, X.J.

Direct determination of the initial thermal evolution behaviour of the platelet defects in hydrogen implanted silicon wafers
pp. 739-742(4)
Authors: Xiao, Q.; Tu, H.

Fracture and impact behaviour of solid phase formed polypropylene composites with long glass fibres
pp. 743-748(6)
Authors: Rhee, K.Y.; Lee, S.G.; Lee, J.H.