Materials Science and Technology

Bainite formation influenced by large stress
pp. 1499-1505(7)
Authors: Hase, K.; Garcia-Mateo, C.; Bhadeshia, H.K.D.H.

Comparison of different methods for measuring strain induced α-martensite content in austenitic steels
pp. 1506-1512(7)
Authors: Talonen, J.; Aspegren, P.; Hänninen, H.

Grain rotation resulting from cavity sintering
pp. 1513-1518(6)
Author: Burton, B.

Effect of long term elevated temperature service on the properties of type P-22 steel
pp. 1519-1524(6)
Authors: Perets, S.; Arbel, A.; Ariely, S.; Venkert, A.; Shneck, R.Z.

Analysis of steady state creep behaviour of 9-12% chromium ferritic-martensitic steels
pp. 1525-1530(6)
Authors: Dimmler, G.; Weinert, P.; Cerjak, H.

Initiation fracture toughness of HSLA steel through automatic measurement of stretch zone
pp. 1531-1537(7)
Authors: Tarafder, M.; Dey, Swati; Dash, B.; Sivaprasad, S.; Tarafder, S.

Microstructural evolution of ultrafine grained structure in plain carbon steels through single pass rolling
pp. 1538-1544(7)
Authors: Beladi, H.; Kelly, G.L.; Hodgson, P.D.

Processing parameters for the mechanical working of 9 Cr-1 Mo steel: processing maps approach
pp. 1545-1550(6)
Authors: Sivaprasad, P.V.; Mannan, S.L.; Prasad, Y.V.R.K.

Effect of welding technique on weld morphology and hardness of supermartensitic 13%Cr steels
pp. 1551-1562(12)
Authors: Neubert, V.; Reuter, J.; El-Mahalawy, N.; Hoffmeister, H.; Hoffmann, R.

Evaluation of effect of magnetostriction on residual stress relief by pulsed magnetic treatment
pp. 1563-1566(4)
Authors: Cai, Z.P.; Lin, J.A.; Zhou, L.A.; Zhao, H.Y.

Numerical simulation of quenching of large sized blocks of 718 steel used for plastic dies
pp. 1567-1572(6)
Authors: Song, D.L.; Gu, J.F.; Pan, J.S.; Hu, M.J.

Effect of thermal aging on pitting corrosion resistance of 16Cr - 5Ni - 1Mo precipitation hardening stainless steel
pp. 1573-1577(5)
Authors: Abdel-Karim, R.; Dawood, M.M.A.L.; Mahallawi, I.S.E.L.; Koussy, M.R.E.L.

Evolution of interface microstructure and strength properties in titanium - stainless steel diffusion bonded transition joints
pp. 1578-1584(7)
Authors: Ghosh, M.; Laik, A.; Bhanumurthy, K.; Kale, G.B.; Krishnan, J.; Chatterjee, S.

Modelling the effects of process variables on thermal behaviour during high speed resistance welding of tinplate
pp. 1585-1589(5)
Authors: Brown, S.G.R.; Suthar, B.S.

Controlled synthesis of microarc oxidation coating on Ti6Al4V alloy and its antifriction properties
pp. 1590-1594(5)
Authors: Wang, Y.M.; Jiang, B.L.; Guo, L.X.; Lei, T.C.

Transient liquid phase bonding of magnesium alloy (Mg - 3Al - 1Zn) using copper interlayer
pp. 1595-1598(4)
Authors: Sun, D.Q.; Liu, W.H.; Gu, X.Y.

Toughness and fatigue behaviour of eutectic and hypereutectic Al-Si-Cu-Mg alloys produced through lost foam and squeeze casting
pp. 1599-1608(10)
Authors: Lasa, L.; Rodriguez-Ibabe, J.M.

Thermography during laser surface melting of cast aluminium alloy
pp. 1609-1614(6)
Authors: Nayak, S.; Wang, H.; Dahotre, N.B.

Foaming behaviour of Al-Si-Cu-Mg alloys
pp. 1615-1620(6)
Authors: Kim, A.; Cho, S.S.; Lee, H.J.

Deformation and fracture behaviour of porous FVS0812 aluminium alloy prepared by spray deposition
pp. 1621-1626(6)
Authors: Chen, Z.H.; Zhan, M.Y.; Xia, W.J.

DSC and HRTEM investigation of the precipitates in Al-1.0%Mg₂ Si-0.5%Ag alloy
pp. 1627-1631(5)
Authors: Gaber, A.; Matsuda, K.; Ali, A.M.; Zou, Y.; Ikeno, S.

Microstructure and wear characteristics of spray formed and hot extruded Al-Si alloys
pp. 1632-1638(7)
Authors: Srivastava, V.C.; Ojha, S.N.

Structure evolution in annealed and hot deformed Al-V₂ O₅ composite
pp. 1639-1644(6)
Authors: Blaz, L.; Sierpinski, Z.; Tumidajewicz, M.; Kaneko, J.; Sugamata, M.

Tensile behaviour and ductility of 10 vol.-% Saffil short fibre reinforced aluminium
pp. 1645-1648(4)
Authors: Tavangar, R.; Nategh, S.; Weber, L.

Optimising removal rate and reliability of polishing of ceramic blocks using a combination of Taguchi and grey methods
pp. 1649-1654(6)
Authors: Lin, T.-R.; Chiu, H.-C.; Huang, M.-F.

Influence of fibre surface oxidation treatment on mechanical interfacial properties of carbon fibre/ polyarylacetylene composites
pp. 1655-1660(6)
Authors: Fu, H.J.; Huang, Y.D.; Liu, L.

Microstructure and mechanical properties of extruded ZK60 magnesium alloy containing rare earth
pp. 1661-1665(5)
Authors: Ma, C.J.; Liu, M.; Wu, G.H.; Ding, W.J.; Zhu, Y.P.

Vacuum diffusion bonding of TiB₂ cermet to TiAl based alloys
pp. 1666-1668(3)
Authors: Li, Z.R.; Feng, J.C.; Cao, J.