Materials Science and Technology

Understanding mechanisms of grain refinement of aluminium alloys by inoculation
pp. 1357-1369(13)
Author: Quested, T.E.

Influence of process parameters on superplasticity of friction stir processed nugget in high strength Al - Cu - Li alloy
pp. 1370-1376(7)
Authors: Attallah, M.M.; Salem, H.G.

The effect of boundary spacing on substructure strengthening
pp. 1377-1382(6)
Authors: Nes, E.; Marthinsen, K.; Holmedal, B.

Development of high performance magnesium nanocomposites using solidification processing route
pp. 1383-1388(6)
Authors: Hassan, S.F.; Gupta, M.

Effect of presence of SiC and operating frequency on the damping behaviour of pure magnesium
pp. 1389-1396(8)
Authors: Srikanth, N.; Saravanaranganathan, D.; Gupta, M.

Microstructural evolution of AZ61 magnesium alloy during hot deformation
pp. 1397-1402(6)
Authors: Zhou, H.T.; Zeng, X.Q.; Liu, L.L.; Dong, J.; Wang, Q.D.; Ding, W.J.; Zhu, Y.P.

Solidification of ternary eutectic and near eutectic alloys in the Ag - Cu - Sn system
pp. 1403-1413(11)
Authors: Snugovsky, L.; Perovic, D.D.; Rutter, J.W.

Modelling hot deformation of Inconel 718 using state variables
pp. 1414-1420(7)
Authors: Zhao, X.; Guest, R.P.; Tin, S.; Cole, D.; Brooks, J.W.; Peers, M.

TEM study of nanopores and the embrittlement of CVD nickel foam
pp. 1421-1426(6)
Authors: Carpenter, G.J.C.; Wronski, Z.S.; Phaneuf, M.W.

Surface properties of bio-implant Nitinol modified by ECR cold plasma
pp. 1427-1430(4)
Authors: Yang, J.; Wang, J.; Tong, S.

Relative importance of transformation temperatures and sulphur content on hot ductility of steels
pp. 1431-1439(9)
Authors: Cowley, A.; Mintz, B.

Formation of sulphide 'patches' on inclusions in C - Mn steel weld metal
pp. 1440-1446(7)
Authors: Miao, P.; Knott, J.F.

Transition from upper to lower bainite in Fe-C-Cr steel
pp. 1447-1454(8)
Authors: Ławrynowicz, Z.

Improvement of creep strength by fine distribution of TiC in 9Cr ferritic heat resistant steel
pp. 1455-1461(7)
Authors: Taneike, M.; Fujitsuna, N.; Abe, F.

Densification and microstructural evaluation during laser sintering of M2 high speed steel powder
pp. 1462-1468(7)
Authors: Simchi, A.; Asgharzadeh, H.

Critical condition for dynamic recrystallisation of high carbon steels
pp. 1469-1473(5)
Authors: Elwazri, A.M.; Wanjara, P.; Yue, S.

Effect of bonding time on joint properties of vacuum brazed WC - Co hard metal/carbon steel using stacked Cu and Ni alloy as insert metal
pp. 1474-1478(5)
Authors: Lee, W.B.; Kwon, B.D.; Jung, S.B.

Joint evolution and strengthening mechanisms in arc brazed galvanised steels with Cu₉₇Si₃ filler
pp. 1479-1483(5)
Authors: Yu, Z.S.; Li, R.F.; Zhou, F.M.; Wu, M.F.; Qi, K.; Qian, Y.Y.

Technology and interface structure for diffusion bonding of Fe₃Al/18-8 dissimilar materials
pp. 1484-1488(5)
Authors: Li, Y.J.; Wang, J.; Yin, Y.S.; Ma, H.J.

Modelling behaviour of oxide film during vibration diffusion bonding of SiC_p/A356 composite in air
pp. 1489-1492(4)
Authors: Yan, J.C.; Xu, H.B.; Xu, Z.W.; Ma, L.; Yang, S.Q.

Formation of zinc oxide nanoparticles by mechanochemical reaction
pp. 1493-1495(3)
Authors: Yang, H.M.; Zhang, X.C.; Tang, A.D.; Ao, W.Q.

Production of MgAl₂O₄ - Ti(C,N) composite ceramics by aluminothermic reduction in reducing atmosphere
pp. 1496-1498(3)
Authors: Li, Y.B.; Li, N.; Ruan, G.Z.; Li, X.H.