Materials Science and Technology

Contribution of multiscale materials modelling for underwriting nuclear pressure vessel integrity
pp. 553-566(14)
Authors: Flewitt, P.E.J.; Moskovic, R.

Characterisation of precipitation microstructures in aluminium alloys 7040 and 7050 and their relationship to mechanical behaviour
pp. 567-576(10)
Authors: Dumont, D.; Deschamps, A.; Bréchet, Y.; Sigli, C.; Ehrström, J.C.

Formation of microlayers of clad residue on aluminium brazing sheet during melting and resolidification in brazing process
pp. 577-584(8)
Authors: Gao, F.; Sekulic, D.P.; Qian, Y.Y.; Morris, J.G.

Uptake of iron and its effect on grain refinement of pure magnesium by zirconium
pp. 585-592(8)
Authors: Cao, P.; Qian, Ma; StJohn, D.H.; Frost, M.T.

Effects of VIM frequency on chemical composition, homogeneity and microstructure of NiTi shape memory alloy
pp. 593-598(6)
Authors: Badakhshan Raz, S.; Sadrnezhaad, S.K.

Grain boundary crystallography in two Fe-C-P alloys
pp. 599-604(6)
Authors: Williams, G.O.; Randle, V.

Method for determining the elastic modulus at grain boundaries for polycrystalline materials
pp. 605-609(5)
Authors: Zheng, L.; Xu, T.D.

Measurement of autoclave thermal profiles during high pressure steam de-waxing of investment shells

Measurement of autoclave thermal profiles during high pressure steam de-waxing of investment shells

Quasi-static fracture toughness testing of a single CT specimen at two test conditions
pp. 623-626(4)
Authors: Sasikala, G.; Ray, S.K.

Numerical analysis of factors influencing Charpy impact properties of TMCR structural steels using fuzzy modelling
pp. 627-633(7)
Authors: Chen, M.Y.; Linkens, D.A.; Bannister, A.

Microstructure and impact behaviour of ASTM A105/AISI 304L friction weldments
pp. 634-640(7)
Authors: Straffelini, G.; Pellizzari, M.; Bernardi, N.

Mechanical and corrosion properties of P/M-HIP super duplex stainless steel after different industrial heat treatments as used for large components
pp. 641-644(4)
Authors: Smuk, O.; Hänninen, H.; Liimatainen, J.

Development of wear resistant medium carbon dual phase steels and their mechanical properties
pp. 645-652(8)
Authors: Tyagi, Rajnesh; Nath, S.K.; Ray, S.

Phase and microstructure evolution in Cu-In-Cr alloys
pp. 653-657(5)
Authors: Guo, J.J.; Zhao, C.Z.; Wu, S.P.; Su, Y.Q.; Jia, J.

A study of Ti/Fe contact reaction structures
pp. 658-660(3)
Authors: Wu, M.F.; Yu, Z.S.; Li, R.F.

Mechanical properties of Ti₃SiC₂ particulate reinforced copper prepared by hot pressing of copper coated Ti₃SiC₂ and copper powder
pp. 661-665(5)
Authors: Zhou, Y.; Chen, B.; Wang, X.; Yan, C.

Microstructure and properties of Nd-Fe-B magnets prepared by spark plasma sintering
pp. 666-668(3)
Authors: Yue, M.; Zhang, J.X.; Wang, G.P.; Liu, W.Q.; Zhou, M.L.

Effect of preparation conditions on relative elongation of nickel foam
pp. 669-672(4)
Author: Liu, P.S.

Hard coatings on aluminium alloy surfaces produced using microplasma oxidation
pp. 673-675(3)
Authors: Shi, Y.L.; Zhang, X.Y.; Yan, F.Y.; Xie, G.W.

Morphology of adiabatic shear bands in cylindrical specimens of AISI 4340 steel impacted by Hopkinson pressure bar
pp. 676-678(3)
Authors: Li, Q.; Zmudzki, P.; Alameeri, S.; Bassim, M.N.