Materials Science and Technology

Enhancement of high temperature strength and room temperature ductility of iron aluminides by alloying
pp. 1627-1634(8)
Author: Bahadur, Aruna

Influence of flow stress and specimen geometry on the fracture morphology of Nickel 270
pp. 1635-1640(6)
Author: Harvey, D.P.

Movement of alloying elements in Mg -8.5 wt-%Li and AZ91 alloys during tensile tests for superplasticity
pp. 1642-1647(6)
Authors: Ma, A.B.; Nishida, Y.; Saito, N.; Shigematsu, I.; Lim, S.W.

Evolution of dynamic recrystallisation in AISI 304 stainless steel
pp. 1648-1652(5)
Authors: Kim, S.I.; Ko, B.C.; Lee, C.M.; Hwang, S.K.; Yoo, Y.C.

Theoretical model for heterogeneous nucleation of grains during solidification
pp. 1653-1660(8)
Authors: Fraś, E.; Wiencek, K.; Górny, M.; López, H.

Serrated yielding in Cu-1 wt-%Cd alloy
pp. 1661-1664(4)
Authors: Nagarjuna, S.; Anozie, F.N.; Evans, J.T.

Effect of recrystallisation on microstructural evolution and mechanical properties of single crystal nickel base superalloy CMSX-2 Part 1 - Microstructural evolution during recrystallisation of single crystal
pp. 1665-1670(6)
Authors: Jo, C.Y.; Cho, H.Y.; Kim, H.M.

Effect of recrystallisation on microstructural evolution and mechanical properties of single crystal nickel based superalloy CMSX-2 Part 2 - Creep behaviour of surface recrystallised single crystal
pp. 1671-1676(6)
Authors: Jo, C.Y.; Kim, H.M.

Development of directionally solidified Ni-Al-Mo-B-Y alloy IC6A
pp. 1677-1680(4)
Authors: Xiao, C.B.; Han, Y.F.; Li, S.S.; Song, J.X.

Fabrication and mechanical properties of woven Al₂O₃ fibre - ZrO₂ matrix minicomposite reinforced Al₂O₃ matrix composites by slurry infiltration - sintering process
pp. 1681-1687(7)
Authors: Kakisawa, H.; Mamiya, T.; Guo, S.Q.; Liu, W.H.; Zhu, S.J.; Kagawa, Y.

Effect of prior _β processing steps on microstructural refinement during thermomechanical processing of a two phase (α + β) titanium alloy
pp. 1688-1696(9)
Authors: Mallikarjun, K.; Suwas, S.; Chowdhury, S.G.; Bhargava, S.

Influence of retrogression and reaging on fracture toughness of 7010 aluminium alloy
pp. 1697-1704(8)
Author: Robinson, J.S.

Observations of barrelling in aluminium solid cylinders during cold upsetting using different lubricants
pp. 1705-1708(4)
Authors: Malayappan, S.; Narayanasamy, R.

Microstructure and its influence on refining performance of AlTiC master alloys
pp. 1709-1714(6)
Authors: Wang, Z.Q.; Liu, X.F.; Li, S.T.; Bian, X.F.; Zhang, J.Y.

Effect of carbon concentration on tensile behaviour of pearlitic steels
pp. 1715-1720(6)
Authors: Tomota, Y.; Watanabe, O.; Kanie, A.; Moriai, A.; Minakawa, N.; Moriai, Y.

Influence of silicon, aluminium, phosphorus and boron on hot ductility of TRansformation Induced Plasticity assisted steels
pp. 1721-1726(6)
Authors: Mintz, B.; Tuling, A.; Delgado, A.

Solidification microstructures and mechanical properties of vertical centrifugal cast high speed steel
pp. 1727-1732(6)
Authors: Kim, S.W.; Lee, U.J.; Woo, K.D.; Kim, D.K.

Cavitation erosion resistance of Fe-26Mn-6Si-7Cr-1Cu shape memory alloy
pp. 1733-1736(4)
Authors: Long, N.D.; Zhu, J.H.

Stress corrosion cracking and hydrogen embrittlement cracking of welded weathering steel and carbon steel in a simulated acid rain environment
pp. 1737-1745(9)
Authors: Choi, Y.S.; Kim, J.G.

Caustic stress corrosion cracking of a spheroidal graphite cast iron: characterisation of ex-service component
pp. 1746-1750(5)
Authors: Raman, R. K. Singh; Muddle, B.C.

Caustic stress corrosion cracking of a spheroidal graphite cast iron: laboratory investigation
pp. 1751-1754(4)
Authors: Raman, R. K. Singh; Muddle, B.C.

Carbide dissolution in thin wall ductile iron
pp. 1755-1760(6)
Authors: Giacopini, A.; Boeri, R.E.; Sikora, J.A.

Simultaneous prediction of austemperability and processing window for austempered ductile iron
pp. 1761-1770(10)
Authors: Zahiri, S.H.; Davies, C.H.J.; Pereloma, E.V.

Effects of test specimen geometry on creep behaviour of 12Cr steel in miniaturised disc bend tests
pp. 1771-1776(6)
Authors: Ule, B.; Sturm, R.; Leskovšek, V.

Die wall friction and influence of some process parameters on friction in iron powder compaction
pp. 1777-1782(6)
Authors: Solimanjad, N.; Larsson, R.