Materials Science and Technology

Recrystallisation after hot deformation of two phase stainless steels
pp. 1311-1320(10)
Authors: Al Jouni, F.E.; Sellars, C.M.

Heterogeneous deformation of a two phase nickel - tungsten alloy
pp. 1321-1329(9)
Authors: Sinclair, C.W.; Embury, J.D.; Weatherly, G.C.; Conlon, K.T.; Engler, O.

Avrami theory for transformations from non-uniform austenite grain structures
pp. 1330-1334(5)
Authors: Matsuda, H.; Bhadeshia, H.K.D.H.

Modelling and characterisation of V₄C₃ precipitation and cementite dissolution during tempering of Fe-C-V martensitic steel
pp. 1335-1343(9)
Authors: Yamasaki, S.; Bhadeshia, H.K.D.H.

Influence of precipitation on serrated flow in Al-5Zn-1Mg alloy
pp. 1344-1348(5)
Authors: Kumar, S.; Shabadi, R.; Patel, M.M.

Influence of grain size on tensile properties of Al-Mg alloys
pp. 1349-1354(6)
Authors: Lloyd, D.J.; Court, S.A.

Damage and forming limit analysis in porous ductile sheet metals at room or elevated temperatures
pp. 1355-1360(6)
Authors: Zhang, L.; Yin, Y.J.; Chen, Y.Q.; Xue, M.D.

Modelling recovery and recrystallisation during annealing of AA 5754 aluminium alloy
pp. 1361-1368(8)
Authors: Poole, W.J.; Militzer, M.; Wells, M.A.

Superplastic behaviour of annealed AA 8090 Al-Li alloy
pp. 1369-1378(10)
Authors: Kashyap, B.P.; Chaturvedi, M.C.

Comparison of texture evolution during cold rolling between direct chill and continuous cast aluminium alloy 5052
pp. 1379-1385(7)
Authors: Zhao, Y.M.; Liu, W.C.; Morris, J.G.

AZ80 and ZC71/SiC/12p closed die forgings for automotive applications: technical and economic assessment of possible mass production
pp. 1386-1390(5)
Author: Kevorkijan, V.

Role of alloying elements in microstructures of beta titanium alloys with carbon additions
pp. 1391-1398(8)
Authors: Chen, Z.Q.; Li, Y.G.; Loretto, M.H.

Surface wetting and interfacial behaviour in arc brazing of titanium alloy
pp. 1399-1402(4)
Authors: Yu, Z.S.; Qian, Y.Y.; Li, R.F.; Zhou, F.M.

Decrease in fatigue life of Sn - 3.8 wt-%Ag - 1.2 wt-%Cu alloy solder joints due to thermal cycling
pp. 1403-1410(8)
Authors: Kato, H.; Matsubara, K.; Kageyama, K.

Metallurgical changes and mechanical behaviour during high temperature aging of welds between Alloy 800 and 316LN austenitic stainless steel
pp. 1411-1417(7)
Authors: Sireesha, M.; Albert, S.K.; Sundaresan, S.

Impact performance of friction welded butt joints between 6061-T6 aluminium alloy and type 304 stainless steel
pp. 1418-1426(9)
Author: Yokoyama, T.

Effect of annealing on corrosion behaviour of nitrogen S phase in austenitic stainless steel
pp. 1427-1434(8)
Authors: Li, X.Y.; Dong, H.

Correlation between Charpy impact energy and J fracture toughness for thermally embrittled reactor pressure vessel steel
pp. 1435-1441(7)
Authors: Tarpani, J.R.; Spinelli, D.

Synthesis and some properties of Ti₃SiC₂ by hot pressing of titanium, silicon, and carbon powders Part 1 - Effect of starting composition on formation of Ti₃SiC₂ and observation of Ti₃SiC₂ crystal morphology
pp. 1442-1446(5)
Authors: Li, S.B.; Xie, J.X.; Zhang, L.T.; Cheng, L.F.

Tensile deformation behaviour of high isotactic polypropylenes
pp. 1447-1457(11)
Authors: Dasari, A.; Tenneti, K.K.; Rohrmann, J.; Misra, R.D.K.

Atomic force microscopy characterisation of mechanically induced surface damage in ethylene-propylene diblock copolymeric materials
pp. 1458-1466(9)
Authors: Dasari, A.; Rohrmann, J.; Misra, R.D.K.