Materials Science and Technology

Disordered carbon-its preparation, structure, and characterisation
pp. 995-1002(8)
Authors: Dasgupta, K.; Sathiyamoorthy, D.

Microstructural characterisation of high velocity oxyfuel thermally sprayed Stellite 6
pp. 1003-1011(9)
Authors: Kong, G.; Zhang, D.; Brown, P.D.; McCartney, D.G.; Harris, S.J.

Finite element creep damage study of nickel base single crystal structures under multiaxial stress states
pp. 1012-1016(5)
Authors: Yue, Z.F.; Lu, Z.Z.

Evaluating fatigue performance of down gauged high strength steel suspension arm
pp. 1017-1024(8)
Authors: Ellwood, R.; Jones, T.B.; Fourlaris, G.

Coating structure and properties of continuously hot dipped aluminised steel wire
pp. 1025-1028(4)
Authors: Liu, S.; Huang, Q.

Distribution of strong carbide forming elements in hard facing weld metal
pp. 1029-1032(4)
Authors: Zhang, Y.B.; Ren, D.Y.

Evaluation of fracture toughness of interface between weld overlay and base metal in hydrocracker reactor
pp. 1033-1036(4)
Authors: Abdolmaleki, A.R.; Mirdamadi, S.H.; Arabi, H.; Rahmanian, M.

Texture evolution in hot band and annealed hot bands of low alloyed ferritic stainless steel
pp. 1037-1044(8)
Authors: Singh, C.D.; Kumar, S.

Effect of welding thermal cycles and cold working on fracture toughness of SN490 steel under static and dynamic loading
pp. 1045-1049(5)
Authors: Qiu, H.; Kawaguchi, Y.; Enoki, M.; Kishi, T.

Effect of surface properties on high cycle fatigue behaviour of shot peened ductile steel
pp. 1050-1056(7)
Authors: Fathallah, R.; Sidhom, H.; Braham, C.; Castex, L.

Pressure infiltration casting process and thermophysical properties of high volume fraction SiC_p/Al metal matrix composites
pp. 1057-1064(8)
Authors: Lee, H.S.; Hong, S.H.

Modelling the flow behaviour of steel under non-isothermal conditions
pp. 1065-1069(5)
Authors: Serajzadeh, S.; Zebarjad, S.M.

Segregation and eutectic formation in solidification of Fe-1C-1 5-Cr steel
pp. 1070-1076(7)
Authors: Kato, T.; Jones, H.; Kirkwood, D.H.

Rigid-plastic constitutive theory for normal anisotropic and planar isotropic sheet metals with voids
pp. 1077-1083(7)
Authors: Yin, Y.; Zhang, L.; Chen, Y.; Fan, Q.

Modelling wide gap TLP bonding of Ti-48 at.-%Al-2 at.-%Cr-2 at.-%Nb alloys
pp. 1084-1090(7)
Authors: Zhou, T.; Gale, W.F.

Sliding temperature and wear behaviour of cast Al-Si base alloy
pp. 1091-1096(6)
Author: Dwivedi, D.K.

Thermal properties of Mg-Li and Mg-Li-Al alloys
pp. 1097-1100(4)
Authors: Rudajevová, A.; Kúdela, S.; Staněk, M.; Lukáč, P.

Activation energies of intermetallic compound growth at interface between Sn-5Bi-3.5Ag solder and Cu substrate
pp. 1101-1106(6)
Authors: Yoon, J.W.; Lee, C.B.; Jung, S.B.

Numerical simulation of thermal conductivity of MMCs: effect of thermal interface resistance
pp. 1107-1114(8)
Authors: Duschlbauer, D.; Böhm, H.J.; Pettermann, H.E.

Thermomechanical fatigue of short fibre reinforced aluminium matrix piston alloy
pp. 1115-1118(4)
Authors: Schnabl, A.; Degischer, H.P.

Mechanical behaviour of Al₂O₃-ZrO₂ minicomposite reinforced glass matrix optomechanical composite
pp. 1119-1124(6)
Authors: Dericioglu, A.F.; Kagawa, Y.

Effects of short mullite fibres on aging response of Al-4^.5Cu based metal matrix composite
pp. 1125-1129(5)
Authors: Jing, S.; Shen, B.L.; Gao, S.J.; Tu, M.J.

Microstructure and mechanical properties of spray deposited and extruded 7000 series aluminium alloys
pp. 1130-1136(7)
Authors: Salamci, E.; Cochrane, R.F.

Effect of carbon content on plastic flow behaviour of plain carbon steels at elevated temperature
pp. 1137-1147(11)
Authors: Escobar, F.; Cabrera, J.M.; Prado, J.M.

In situ fabrication of titanium carbide reinforced copper MMC
pp. 1148-1150(3)
Authors: Bannan, J.; Temple, R.I.; Jones, R.