Materials Science and Technology

Microwave initiated self-propagating high temperature synthesis of materials
pp. 1419-1427(9)
Authors: Peng, J.-H.; Binner, J.; Bradshaw, S.

Microsegregation and its effects on quantity and morphology of secondary phases during solidification of Al-Fe-Si alloys
pp. 1428-1434(7)
Authors: Dutta, B.; Rettenmayr, M.

Nucleation kinetics: runaway nucleation
pp. 1435-1438(4)
Author: Stowell, M.J.

Internal variable approach to microstructural change in 7475 aluminium alloy during superplastic deformation
pp. 1439-1444(6)
Authors: Bang, W.; Ha, T.K.; Chang, Y.W.

Investigation of secondary phase particles in spray deposited 7000 series aluminium alloys
pp. 1445-1452(8)
Authors: Salamci, E.; Cochrane, R.F.

Influence of heat treatment processes on fatigue performance of particle reinforced aluminium alloys
pp. 1453-1457(5)
Authors: Fitzpatrick, M.E.; Moffatt, J.E.; Dubois, A.; Gregoire, F.; Tarrant, A.D.

Dimensional stability and thermal stress of 6061 Al/SiC_w composite during thermal cycles
pp. 1458-1460(3)
Authors: Jiang, C.H.; Wu, J.S.

Influence of heat treatment and particle shape on mechanical properties of infiltrated Al₂O₃ particle reinforced Al-2 wt-%Cu
pp. 1461-1470(10)
Authors: Miserez, A.; Stücklin, S.; Rossoll, A.; San Marchi, C.; Mortensen, A.

Effect of cooling rate on microstructure of Ti-6Al-4V forging
pp. 1471-1478(8)
Authors: Senkov, O.N.; Valencia, J.J.; Senkova, S.V.; Cavusoglu, M.; Froes, F.H.

Pack codeposition of Al and Cr to form diffusion coatings resistant to high temperature oxidation and corrosion for γ-TiAl
pp. 1479-1484(6)
Authors: Xiang, Z.D.; Rose, S.R.; Datta, P.K.

Microstructure and oxidation resistance of rapidly solidified Ti₃Al-Si alloys
pp. 1485-1493(9)
Authors: Jazayeri-G, A.; Buckley, R.A.; Davies, H.A.

Microstructure and thermal expansion of Ti₃SiC₂
pp. 1494-1496(3)
Authors: Li, S.-B.; Zhang, L.-T.; Cheng, L.-F.

Synchrotron X-ray study of micromechanics of Ti/SiC_f composites with fibres containing defects introduced by laser drilling
pp. 1497-1503(7)
Authors: McDonald, S.A.; Preuss, M.; Maire, E.; Buffiere, J.-Y.; Mummery, P.M.; Withers, P.J.

Advantages of rotation cylinder method for production of particle reinforced magnesium composites
pp. 1504-1506(3)
Authors: Kim, S.K.; Kim, Y.-J.

Effect of dual size particle distribution on processing and properties of AZ91D/SiC_p magnesium matrix composites prepared by rotation cylinder method
pp. 1507-1512(6)
Authors: Kim, S.K.; Kim, Y.-J.

Evolution of textures in hot rolled Nb - Ti and V - Nb microalloyed steels
pp. 1513-1516(4)
Authors: Misra, R.D.K.; Anderson, J.P.

Suppression of grain growth in dual phase steels
pp. 1517-1523(7)
Authors: Park, J.-H.; Tomota, Y.; Wey, M.-Y.

Acoustic emission monitoring of bainitic and martensitic transformation in medium carbon steel during continuous cooling
pp. 1524-1528(5)
Authors: Van Bohemen, S.M.C.; Hermans, M.J.M.; Den Ouden, G.

Modelling of Charpy energy in terms of normalisation heat treatment parameters
pp. 1529-1534(6)
Authors: Pereira, M.V.; Darwish, F.A.; Kohler, M.H.

Experimental investigation on statistics of extremes for three-dimensional distribution of non-metallic inclusions
pp. 1535-1543(9)
Authors: Zhou, S.; Murakami, Y.; Beretta, S.; Fukushima, Y.

Tungsten inert gas surface modification of SAE 4140 steel
pp. 1544-1550(7)
Authors: Eroglu, M.; Önalp, S.

Sliding wear of various materials in molten zinc
pp. 1551-1560(10)
Authors: Zhang, K.; Battiston, L.

Martensitic transformation and work hardening of metastable austenite induced by abrasion in austenitic Fe-C-Cr-Mn-B Alloy - a TEM study
pp. 1561-1564(4)
Authors: Xu, X.L.; Yu, Z.W.; Ma, Y.Q.; Wang, X.; Shi, Y.Q.

Organic fibre modified ceramic shell moulding for investment casting
pp. 1565-1573(9)
Authors: Jones, S.; Yuan, C.; Lewis, K.

High speed steels for hot rolls with improved impact and thermal fatigue resistance
pp. 1574-1580(7)
Authors: Molinari, A.; Tremea, A.; Pellizzari, M.; Biggi, A.; Corbo, G.

Experimental investigation on thermal wear of high speed steel rolls in hot strip rolling
pp. 1581-1584(4)
Authors: Li, C.S.; Liu, X.H.; Wang, G.D.; Yang, G.

Effect of Co⁶⁰ gamma ray irradiation for carbon fibre on interfacial properties in epoxy resin composites
pp. 1585-1588(4)
Authors: Ma, H.Y.; Huang, Y.D.; Zhang, Z.Q.; Shao, L.

Technical note Formation of SiC - AlN solid solution via high energy ball milling and subsequent heat treatment
pp. 1589-1592(4)
Author: Li, J.-L.