Materials Science and Technology

Foreword
pp. 473-473(1)
Author: Clyne, T.W.

Adaptation of aluminium foam properties by means of precipitation hardening
pp. 474-479(6)
Authors: Lehmhus, D.; Banhart, J.; Rodriguez-Perez, M.A.

Inertia effects in uniaxial dynamic compression of a closed cell aluminium alloy foam
pp. 480-488(9)
Authors: Tan, P.J.; Harrigan, J.J.; Reid, S.R.

Mechanical analysis and microstructural characterisation of metal foams
pp. 489-494(6)
Authors: Benouali, A.H.; Froyen, L.; Delerue, J.F.; Wevers, M.

Matrix chemistry optimisation of Al/Altex composites preserving both bres and matrix alloy integrity
pp. 495-500(6)
Authors: Vaucher, S.; Beffort, O.; Long, S.; Cayron, C.; Buffat, P.

Effect of elevated temperature on ultimate tensile strength and failure modes of short carbon fibre reinforced magnesium composite
pp. 501-506(6)
Authors: Russell-Stevens, M.; Plane, D.C.; Summerscales, J.; Schulz, P.; Papakyriacou, M.

Hot workability and processing maps of aluminium based discontinuously reinforced composites
pp. 507-514(8)
Authors: Vedani, M.; Gariboldi, E.; D'Errico, F.

Creep behaviour of AA 6061 metal matrix composite alloy and AA 6061
pp. 515-521(7)
Authors: Requena, G.; Telfser, D.; Hörist, C.; Degischer, H.P.

Metal matrix composite reinforced with co-continuous Al-Al₂O₃ fibres produced in situ by reaction of an aluminium matrix with fossil SiO₂ spicules
pp. 522-528(7)
Authors: Gregolin, E. de Napole; Goldenstein, H.

Quanti cation of precipitation kinetics and age hardening of Fe-12Ni-6Mn alloy during overaging
pp. 529-533(5)
Authors: Guo, Z.; Sha, W.

Evaluation and review of simultaneous transformation model in high strength low alloy steels
pp. 534-540(7)
Authors: Caballero, F.G.; Capdevila, C.; de Andrés, C. García

Mechanism of bake hardening in ultralow carbon steel containing niobium and titanium additions
pp. 541-547(7)
Authors: Baker, L.J.; Parker, J.D.; Daniel, S.R.

Dynamic materials modelling and finite element simulation of titanium alloy turbine disc forging
pp. 548-553(6)
Authors: Srinivasan, N.; Ramakrishnan, N.

Tensile damage stages in cast A356-T6 aluminium alloy
pp. 554-562(9)
Authors: Doglione, R.; Douziech, J.L.; Berdin, C.; François, D.

Effect of restoration on hot ductility of high alloy and duplex stainless steels
pp. 563-570(8)
Authors: Kömi, J.I.; Karjalainen, L.P.

Reinvestigation of dynamic materials model analysis of 99.94% purity aluminium
pp. 571-574(4)
Authors: Murty, S. V. S. Narayana; Rao, B. Nageswara

Effect of excimer laser surface treatment on corrosion behaviour of aluminium alloy 6013
pp. 575-580(6)
Authors: Chan, C.P.; Yue, T.M.; Man, H.C.

High strain rate superplasticity and deformation mechanisms of powder metallurgy 6061 Al/SiC_p composites
pp. 581-585(5)
Authors: Li, X.J.; Tan, M.J.

Effects of addition of TiN nanoparticles on microstructure and mechanical properties of TiC based cermets
pp. 586-590(5)
Authors: Liu, N.; Xu, Y.D.; Li, Z.H.; Zhao, Y.; Li, G.H.; Zhang, L.D.