Materials Science and Technology

Magnets in medicine
pp. 1-12(12)
Authors: Riley M.A.; Walmsley A.D.; Speight J.D.; Harris I.R.

Phase transformations and phase equilibria in Ti -25V -N system at 1200°C
pp. 13-20(8)
Authors: Kroupa A.; Burik J.; Svoboda M.; Chen J.K.; Weatherly G.C.

Effect of processing parameters on shear bands in non-isothermal hot forging of Ti -6Al -4V
pp. 21-29(9)
Authors: Tamizifar M.; Omidvar H.; Salehi S.M.T.; Salehpour Z.; Khoshkalam O.

Influences of tungsten and molybdenum additions on microstructure and mechanical properties of Fe₃Al based alloys
pp. 30-34(5)
Authors: Yu X.Q.; Sun Y.S.

Effect of nickel on microstructure and mechanical properties of heat affected zone of low carbon steel
pp. 35-40(6)
Authors: Eroglu M.; Aksoy M.

Effect of chromium on microstructure and toughness of intercritical heat affected zone of low carbon steel
pp. 41-46(6)
Authors: Eroglu M.; Aksoy M.; Khan T.I.

Influence of accelerated cooling on microstructure and mechanical properties of C -Mn steels
pp. 47-53(7)
Authors: Fang X.; Fan Z.; Ralph B.; Evans P.; Underhill R.

Effects of deformation and heating temperature on the austenite transformation to pearlite in high alloy tool steels
pp. 54-60(7)
Authors: Khlestov V.M.; Konopleva E.V.; McQueen H.J.

Change of fracture mode in Charpy toughness transition temperature range
pp. 61-67(7)
Authors: Vodopivec F.; Breskvar B.; Arzenek B.; Kmeti D.; Vojvodi-Tuma J.

Diffusion bonding between Ti -6Al -4V alloy and microduplex stainless steel with copper interlayer
pp. 68-72(5)
Authors: Eroglu M.; Khan T.I.; Orhan N.

Effect of grain boundary orientation and cyclic load on creep and fracture behaviour in directionally solidified nickel base superalloy
pp. 73-80(8)
Authors: Yuan C.; Guo J.T.; Yang H.C.

Recrystallisation behaviour of twin roll cast commercial aluminium -1% manganese alloy after cold rolling
pp. 81-86(6)
Authors: Olguin-Sandoval A.; Puchi-Cabrera E.S.

Cavity formation during high temperature deformation in 3YTZP (3 mol.-% yttria stabilised ZrO₂)/Al₂O₃ composites containing 20 -60 wt-%Al₂O₃
pp. 87-91(5)
Author: Tekeli S.

Synthesis and recyclability of a magnesium based composite using an innovative disintegrated melt deposition technique
pp. 92-98(7)
Authors: Soon L.P.; Gupta M.

Interfacial morphology and strength of Al₂O₃/Nb joint brazed with Cu -Ti -Zr filler metal
pp. 99-102(4)
Authors: Yu Z.-S.; Wu M.-F.; Liang C.; Wang F.-J.; Qi K.

Effect of omitting small sectioned particles with limited cross-sectional area on characterisation of secondary phase particles
pp. 103-110(8)
Authors: Takahashi J.; Suito H.

Oxidation behaviour of Ti6Al4V titanium alloy in oxygen
pp. 111-114(4)
Authors: Mungole M.N.; Singh N.; Mathur G.N.

Comparison of measured and calculated thicknesses of martensite and ledeburite shells around graphite nodules in hardened layer after laser surface remelting
pp. 115-117(3)
Authors: Grum J.; turm R.