Materials Science and Technology

Test methods for measuring tensile strength and ductility of electroplated and electroless copper deposits
pp. 1033-1038(6)
Authors: Keong, K.G.; Sha, W.

Synthesis of boron nitride from ferroboron Part 1 - Nitriding
pp. 1039-1044(6)
Authors: Warner, T.; Liu, C.; Fray, D.J.

Synthesis of boron nitride from ferroboron Part 2 - Leaching
pp. 1045-1049(5)
Authors: Liu, C.; Fray, D.J.

Microstructure in titanium carbonitride cermets
pp. 1050-1054(5)
Authors: Liu, N.; Zeng, Q.M.; Huang, X.M.

Effect of strain path on recrystallisation kinetics during hot rolling of Al-Mn
pp. 1055-1060(6)
Authors: Black, M.P.; Higginson, R.L.; Sellars, C.M.

Mechanism of high temperature oxidation of laser surface engineered TiC/Al alloy `composite' coating on 6061 aluminium alloy
pp. 1061-1068(8)
Authors: Katipelli, L.R.; Dahotre, N.B.

Relationship between tensile strength and preparation conditions for nickel foam
pp. 1069-1072(4)
Authors: Liu, P.S.; Liang, K.M.; Tu, S.W.; Gu, S.R.; Yu, Q.; Li, T.F.; Fu, C.

Tensile and compression performance of superelastic NiTi tubing
pp. 1073-1078(6)
Authors: Siddons, D.J.; Moon, J.R.

Thermomechanical fatigue behaviour of nickel base superalloy IN738LC Part 1 - Comparison of two unified constitutive models for description of mechanical behaviour
pp. 1079-1086(8)
Authors: Fleury, E.; Ha, J.S.

Thermomechanical fatigue behaviour of nickel base superalloy IN738LC Part 2 - Lifetime prediction
pp. 1087-1092(6)
Authors: Fleury, E.; Ha, J.S.

Estimation of air gap and heat transfer coefficient at different faces of Al and Al-Si castings solidifying in permanent mould
pp. 1093-1101(9)
Authors: Taha, M.A.; El-Mahallawy, N.A.; El-Mestekawi, M.T.; Hassan, A.A.

Structural stability and non-catalytic nucleation inhibition effect of Si-Zr-B mould coating on undercooled superalloy melt
pp. 1102-1106(5)
Authors: Liu, F.; Guo, X.F.; Yang, G.C.

Fatigue behaviour of duplex metal coated SiC fibre reinforced Ti-15-3 matrix composites
pp. 1107-1113(7)
Authors: Guo, S.; Kagawa, Y.

Kinetics and dilatometric behaviour of non-isothermal ferrite-austenite transformation
pp. 1114-1118(5)
Authors: Caballero, F.G.; Capdevila, C.; García de Andrés, C.

Ultrahigh strength hot rolled microalloyed steels: microstructural aspects of development
pp. 1119-1129(11)
Authors: Misra, R.D.K.; Weatherly, G.C.; Hartmann, J.E.; Boucek, A.J.

Surface residual stresses and fatigue life of new ultrahigh strength microalloyed steel
pp. 1130-1132(3)
Authors: Misra, R.D.K.; Anderson, J.P.

Modelling the hot plane strain compression test Part 1 - Effect of specimen geometry, strain rate, and friction on deformation
pp. 1133-1141(9)
Authors: Mirza, M.S.; Sellars, C.M.

Modelling the hot plane strain compression test Part 2 - Effect of friction and specimen geometry on spread
pp. 1142-1148(7)
Authors: Mirza, M.S.; Sellars, C.M.

Fractal theory study on morphological dependence of viscosity of semisolid slurries
pp. 1149-1152(4)
Authors: Qin, R.S.; Fan, Z.

Asymmetric behaviour of fibrous metal matrix composites
pp. 1153-1157(5)
Authors: Aghdam, M.M.; Smith, D.J.; Pavier, M.J.

Diffusion bonding of titanium alloy to stainless steel wire mesh
pp. 1158-1162(5)
Authors: He, P.; Zhang J.-H.,; Li X.-Q.,

Effect of mixed mode I/III loading on plastic zone in Armco Iron
pp. 1163-1165(3)
Authors: Kamat, S.V.; Srinivas, M.

Growth and characterisation of ferroelectric potassium lithium niobate crystals
pp. 1166-1168(3)
Authors: Wan Y.-B.,; Chu J.-H.,; Yu T.-Y.,; Yu B.-K.,; Pan S.-K.,

Texture and microstructure in very fine grain Al-Al₃Ti alloys obtained by extrusion of mechanically alloyed powders
pp. 1169-1173(5)
Authors: Lenhard, S.; Helming, K.; Chang, C.P.; Wagner, F.; Grosdidier, T.