Materials Science and Technology

Review of rejuvenation process for nickel base superalloys
pp. 481-486(6)
Author: James, A.

The θ projection method applied to small strain creep of commercial aluminium alloy
pp. 487-493(7)
Authors: Evans, R.W.; Scharning, P.J.

Equilibrium pseudobinary Al-Mg₂Si phase diagram
pp. 494-496(3)
Authors: Zhang, J.; Fan, Z.; Wang, Y.Q.; Zhou, B.L.

Rate dependent deformation of carbon fibre reinforced Al-Li metal matrix composite
pp. 497-504(8)
Authors: Lee W.-S.,; Sue W.-C.,

Relationship between hardness and tensile properties in various single structured steels
pp. 505-511(7)
Authors: Umemoto, M.; Liu, Z.G.; Tsuchiya, K.; Sugimoto, S.; Bepari, M.M.A.

Design of novel high strength bainitic steels: Part 1
pp. 512-516(5)
Authors: Caballero, F.G.; Bhadeshia, H.K.D.H.; Mawella, K.J.A.; Jones, D.G.; Brown, P.

Design of novel high strength bainitic steels: Part 2
pp. 517-522(6)
Authors: Caballero, F.G.; Bhadeshia, H.K.D.H.; Mawella, K.J.A.; Jones, D.G.; Brown, P.

Combined equilibrium and non-equilibrium segregation treatment of temper embrittlement in low alloy steels
pp. 523-528(6)
Authors: Song S.-H.,; Faulkner, R.G.; Flewitt, P.E.J.

Effect of strain rate on fracture toughness of mild steel
pp. 529-535(7)
Authors: Srinivas, M.; Kamat, S.V.

Model for static recrystallisation critical temperature in microalloyed steels
pp. 536-544(9)
Authors: Medina, S.F.; Quispe, A.; Gómez, M.

Identification of processing parameters for Fe-15Cr-2.2Mo-15Ni-0.3Ti austenitic stainless steel using processing maps
pp. 545-550(6)
Authors: Sivaprasad, P.V.; Mannan, S.L.; Prasad, Y.V.R.K.; Chaturvedi, R.C.

Study of steam turbine blade degradationPart 1 - Degradation of mechanical properties of blade during service
pp. 551-555(5)
Authors: Yang, X.H.; Dui, W.Z.

Study of steam turbine blade degradation Part 2 - Damage mechanical model of blade materials during long term service
pp. 556-558(3)
Authors: Yang, X.H.; Dui, W.Z.

Microstructure and tensile properties of modified 9Cr-1Mo steel (grade 91)
pp. 559-565(7)
Authors: Chandravathi, K.S.; Laha, K.; Bhanu Sankara Rao, K.; Mannan, S.L.

Effect of hot working variables on microstructure and brittle to ductile transition in Ti-46.5Al-3Nb-2Cr-0.2W gamma titanium aluminide
pp. 566-572(7)
Authors: Imayev, V.M.; Imayev, R.M.; Kuznetsov, A.V.; Senkov, O.N.; Froes, F.H.

Effects of boron, carbon, and silicon additions on microstructure and properties of a Ti-15Mo based beta titanium alloy
pp. 573-580(8)
Authors: Chen L.-H.,; Blenkinsop, P.A.; Jones, I.P.

Development of oxidation resistant coatings for titanium alloys
pp. 581-587(7)
Authors: Gurrappa, I.; Gogia, A.K.

Wear resistance of austenite-TiC-graphite microstructures prepared by laser coating
pp. 588-592(5)
Authors: Hu J.-D.,; Luan J.-F.,; Dong Q.-Z.,; Zhou Z.-F.,; Tosto, S.

Aluminium foaming using a CO₂ laser
pp. 593-596(4)
Author: Kathuria, Y.P.

Interfacial microstructure and mechanical behaviour in laser clad TiC_p/Ni alloy coatings
pp. 597-600(4)
Authors: Wu, X.L.; Hong, Y.S.

Modification of residual stress by post-weld vibration
pp. 601-605(5)
Authors: Munsi, A.S.M.Y.; Waddell, A.J.; Walker, C.A.

Preparation and characterisation of lanthanum doped BaTiO₃ nanosize polycrystals by sol-gel processing
pp. 606-608(3)
Authors: Liu J.-B.,; Li W.-C.,; Wang Z.-M.,; Zheng C.-P.,