Materials Science and Technology

Some aspects of synthesis of nanocrystalline materials
pp. 119-126(8)
Authors: Froes, F.H.; Senkov, O.N.; Baburaj, E.G.

Evaluation of semiphysical phase transformation model for engineering steels using measured continuous cooling transformation diagrams
pp. 127-134(8)
Authors: van der Wolk, P.J.; Sietsma, J.; Parker, S.V.

Microstructure and mechanical properties of C-Si-Mn(-Nb) TRIP steels after simulated thermomechanical processing
pp. 135-140(6)
Authors: Timokhina, I.B.; Pereloma, E.V.; Hodgson, P.D.

Effect of temper embrittlement and specimen size on Charpy impact testing of a Cr-Mo-V rotor steel
pp. 141-147(7)
Authors: Shekhter, A.; Pereloma, E.V.; Ringer, S.P.

Strain aging of pearlitic steel wire during post­drawing heat treatments
pp. 148-154(7)
Authors: Hinchliffe, C.E.; Smith, G.D.W.

High temperature deformation of 316L stainless steel
pp. 155-161(7)
Author: Puchi Cabrera, E.S.

Austenitisation kinetics of unalloyed and alloyed ductile iron
pp. 162-167(6)
Authors: Nili Ahmadabadi, M.; Parsa, M.H.

Prediction of surface hardness after ferritic nitrocarburising of steels using artificial neural networks
pp. 168-174(7)
Authors: Malinova, T.; Pantev, N.; Malinov, S.

Influence of recovery on dynamic segregation of sulphur to surface of cold rolled nickel
pp. 175-181(7)
Authors: Louahdi, R.; Saindrenan, G.; Le Gall, R.; Liao, G.; Paillard, P.

Numerical analysis of effect of material and processing parameters on thickness distribution during superplastic die bulging of cavity sensitive materials
pp. 182-186(5)
Authors: Xiang Y.-B.,; Chen D.-J.,; Wu S.-C.,

Microstructure and high strain rate superplasticity of in situ composite synthesised from aluminium and nano­ZrO₂ particles by powder metallurgy
pp. 187-194(8)
Authors: Geng, L.; Imai, T.; Mao, J.F.; Takagi, M.; Yao, C.K.

Synthesis and characterisation of free standing, one­dimensional, Al-SiC based functionally gradient material
pp. 195-200(6)
Authors: Gupta, M.; Lim, S.C.; Tan, F.I.

In situ stir cast Al-TiB₂ composite: processing and mechanical properties
pp. 201-206(6)
Authors: Tee, K.L.; Lu, L.; Lai, M.O.

Effects of silicon on microstructure, fluidity, mechanical properties, and fracture behaviour of Mg-6Al alloy
pp. 207-214(8)
Authors: Lü Y.-Z.,; Wang Q.-D.,; Zeng X.-Q.,; Ding W.-J.,; Zhu Y.-P.,

Effect of silver addition on formation of secondary phases in squeeze cast Al-Cu-Mg alloys
pp. 215-222(8)
Authors: Kim Y.-C.,; Kim D.-H.,; Kim, W.T.; Han Y.-S.,; Lee, H.I.

Tensile stress-strain and work hardening behaviour of 316LN austenitic stainless steel
pp. 223-231(9)
Authors: Choudhary, B.K.; Samuel, E.I.; Bhanu Sankara Rao, K.; Mannan, S.L.