Materials Science and Technology

Development of fine grained structures using severe plastic deformation
pp. 1239-1245(7)
Authors: Horita, Z.; Furukawa, M.; Nemoto, M.; Langdon, T.G.

Microstructural evolution during formation of ultrafine grain structures by severe deformation
pp. 1246-1250(5)
Authors: Bowen, J.R.; Prangnell, P.B.; Humphreys, F.J.

Processing to ultrafine grain structures by conventional routes
pp. 1251-1255(5)
Authors: Gholinia, A.; Humphreys, F.J.; Prangnell, P.B.

Structural and mechanical properties in AA 5083 processed by ECAE
pp. 1256-1258(3)
Authors: Dupuy, L.; Blandin, J.J.; Rauch, E.F.

Effect of grain size on tensile behaviour of a submicron grained Al-3 wt-%Mg alloy produced by severe deformation
pp. 1259-1263(5)
Authors: Hayes, J.S.; Keyte, R.; Prangnell, P.B.

Ultrafine grained steels: industrial prospects
pp. 1264-1266(3)
Author: Howe, A.A.

Processing of steel for ultrafine ferrite grain structures
pp. 1267-1272(6)
Authors: Priestner, R.; Ibraheem, A.K.

Ultrafine ferrite formation during hot strip rolling
pp. 1273-1276(4)
Authors: Hurley, P.J.; Kelly, G.L.; Hodgson, P.D.

Acicular ferrite microstructure in titanium bearing low carbon steels
pp. 1277-1281(5)
Authors: Suh J.-Y.,; Byun J.-S.,; Shim J.-H.,; Oh Y.-J.,; Cho, Y.W.; Shim J.-D.,; Lee, D.N.

Role of silicon in influencing strength and impact behaviour of ferrite and its likely influence at ultrafine grain size
pp. 1282-1286(5)
Author: Mintz, B.

Critical review of mechanism of superplastic deformation in fine grained metallic materials
pp. 1287-1294(8)
Author: Todd, R.I.

Critical reinforcement size for cavity nucleation during superplastic deformation of metal matrix composites
pp. 1295-1298(4)
Authors: Iwasaki, H.; Hosokawa, H.; Mabuchi, M.; Higashi, K.

X-ray microtomography study of cavity coalescence during superplastic deformation of an Al-Mg alloy
pp. 1299-1301(3)
Authors: Martin, C.F.; Josserond, C.; Blandin, J.J.; Salvo, L.; Cloetens, P.; Boller, E.

Superplasticity and production of mechanically milled Ti-6Al-4V-0.5B
pp. 1302-1308(7)
Authors: Godfrey, T.M.T.; Wisbey, A.; Brown, A.; Brydson, R.; Hammond, C.

Superplastic behaviour of Inconel 718 sheet
pp. 1309-1313(5)
Authors: Huang, Y.; Strangwood, M.; Blackwell, P.L.

Application of superplasticity in commercial magnesium alloy for fabrication of structural components
pp. 1314-1319(6)
Authors: Mukai, T.; Watanabe, H.; Higashi, K.

High strain rate superplasticity in Japan
pp. 1320-1329(10)
Author: Higashi, K.

Achieving superplasticity at high strain rates using equal channel angular pressing
pp. 1330-1333(4)
Authors: Furukawa, M.; Horita, Z.; Nemoto, M.; Langdon, T.G.

Development of a high strain rate superplastic Al-Mg-Zr alloy
pp. 1334-1339(6)
Authors: Grimes, R.; Dashwood, R.J.; Harrison, A.W.; Flower, H.M.

High strain rate superplasticity in microcrystalline and nanocrystalline materials
pp. 1340-1344(5)
Authors: McFadden, S.X.; Sergueeva, A.V.; Mishra, R.S.; Mukherjee, A.K.

Functionalising nanocrystalline TiO₂ films: dye sensitised solar cells and optical biosensors
pp. 1345-1348(4)
Authors: Durrant, J.R.; Nelson, J.; Klug, D.R.

Opportunities and pitfalls in characterisation of nanoscale features
pp. 1349-1355(7)
Author: Rainforth, W.M.

Chemical routes to nanostructured materials
pp. 1356-1358(3)
Author: Schmidt, H.

Deformation and recrystallisation studied by EBSP: breakthroughs and limitations
pp. 1360-1363(4)
Author: Juul Jensen, D.

Analysis of cellular microstructures in Al-Fe-Si alloy
pp. 1364-1366(3)
Author: Hutchinson, W.B.

Hot deformation and annealing of cube oriented aluminium single crystals
pp. 1367-1371(5)
Authors: Huang, Y.; Humphreys, F.J.; Ferry, M.

Grain boundary and fracture surface analysis of Fe-C-P steel
pp. 1372-1375(4)
Authors: Williams, O.; Randle, V.; Spellward, P.; Cowan, J.

Microstructure and microtexture of ultrafine ferrite formed in 0.1%C steel using new strip rolling process
pp. 1376-1379(4)
Authors: Hurley, P.J.; Muddle, B.C.; Hodgson, P.D.

Application of electron backscattered diffraction and crystal orientation mapping to recrystallisation studies in high strength interstitial free steels
pp. 1380-1383(4)
Authors: Cross, I.J.; Randle, V.; Daniel, S.R.

Measurement of macrotexture by automated crystal orientation mapping: an alternative to X-ray diffraction
pp. 1384-1388(5)
Author: Schwarzer, R.A.

Discrimination and mapping of phase distributions by automated crystal orientation measurement
pp. 1389-1392(4)
Authors: Schwarzer, R.A.; Singh, A.K.; Sukkau, J.

Electron backscattered diffraction analyses combined with environmental scanning electron microscopy: potential applications for non-conducting, uncoated mineralogical samples
pp. 1393-1398(6)
Author: Habesch, S.M.

Effect of thermomechanical processing on grain boundary character distribution in α brass
pp. 1399-1402(4)
Authors: Davies, H.; Randle, V.

Mechanically alloyed metals
pp. 1404-1411(8)
Author: Bhadeshia, H.K.D.H.

Modelling microstructural evolution and mechanical properties of austempered ductile iron
pp. 1412-1419(8)
Authors: Thomson, R.C.; James, J.S.; Putman, D.C.

Modelling of non-equilibrium solidification in ternary alloys: comparison of 1D, 2D, and 3D cellular automaton-finite difference simulations
pp. 1420-1424(5)
Authors: Jarvis, D.J.; Brown, S.G.R.; Spittle, J.A.

Simulation of microsegregation and microstructural evolution in directionally solidified superalloys
pp. 1425-1428(4)
Authors: Böttger, B.; Grafe, U.; Ma, D.; Fries, S.G.

Computational phase studies in commercial aluminium and magnesium alloys
pp. 1429-1433(5)
Authors: Seifert, H.J.; Liang, P.; Lukas, H.L.; Aldinger, F.; Fries, S.G.; Harmelin, M.G.; Faudot, F.; Jantzen, T.

Thermodynamic calculations for precipitation in maraging steels
pp. 1434-1436(3)
Author: Sha, W.

Application of novel technique to examine thermomechanical processing of near β alloy Ti-10V-2Fe-3Al
pp. 1437-1444(8)
Authors: Jackson, M.; Dashwood, R.J.; Christodoulou, L.; Flower, H.M.

Effect of top and bottom filling on reliability of investment castings in Al, Fe, and Ni based alloys
pp. 1445-1452(8)
Authors: Cox, M.; Wickins, M.; Kuang, J.P.; Harding, R.A.; Campbell, J.

Mechanical and microstructural behaviour of a particulate reinforced steel for structural applications
pp. 1453-1464(12)
Authors: Kulikowski, Z.; Godfrey, T.M.T.; Wisbey, A.; Goodwin, P.S.; Langlais, F.; Flower, H.M.; Zheng, J.G.; Davies, D.P.

Importance of interface chemistry in hipping diffusion bonding of precipitation hardened martensitic stainless steels
pp. 1465-1471(7)
Authors: Ashworth, M.A.; Greenwood, R.M.; Jacobs, M.H.; Davies, S.; Armstrong, G.R.