Materials Science and Technology

Development of robust processing routes for powder metallurgy high speed steels
pp. 945-957(13)
Authors: Wright, C.S.; Wronski, A.S.; Iturriza, I.

Polishing techniques for optical grade sapphire
pp. 958-960(3)
Authors: Sudarshan, T.S.; Radhakrishnan, R.

Computer prediction of microsegregation in peritectic alloy systems
pp. 961-967(7)
Authors: Howe, A.A.; Kirkwood, D.H.

Experimental study of Bi-Cd-In phase diagram using conventional methods plus quenching and `solidification path' techniques
pp. 968-978(11)
Authors: Snugovsky, L.; Perovic, D.D.; Rutter, J.W.

Microstructures formed by directional solidification of two ternary eutectic alloys of Bi-Cd-In system
pp. 979-983(5)
Authors: Snugovsky, L.; Perovic, D.D.; Rutter, J.W.

Phase relationships involving TiC and Ti₃AlC (P phase) in Ti-Al-C system
pp. 984-992(9)
Authors: Riaz, S.; Flower, H.M.; West, D.R.F.

Partitioning of titanium during solidification of aluminium alloys
pp. 993-1000(8)
Authors: Easton, M.A.; StJohn, D.H.

Electron microscopical investigation of as cast AZ91D alloy
pp. 1001-1006(6)
Authors: Kaya, A.A.; Uzan, P.; Eliezer, D.; Aghion, E.

Investigation into refractories as crucible and mould materials for melting and casting γ-TiAl alloys
pp. 1007-1016(10)
Authors: Kuang, J.P.; Harding, R.A.; Campbell, J.

Effect of thermal cycling on martensitic transformation temperatures in Ti-Ni-Cu shape memory alloys
pp. 1017-1021(5)
Authors: Nam, T.H.; Ha, G.S.; Lee, H.W.; Hur, S.G.

Evolution of Fe-Co rich particles in Alnico 8 alloy thermomagnetically treated at 800°C
pp. 1023-1028(6)
Authors: Chu, W.G.; Fei, W.D.; Li, X.H.; Yang, D.Z.; Wang, J.L.

Hot deformation mechanisms in Ti-6Al-4V with transformed β starting microstructure: commercial v. extra low interstitial grade
pp. 1029-1036(8)
Authors: Prasad, Y.V.R.K.; Seshacharyulu, T.; Medeiros, S.C.; Frazier, W.G.; Malas III, J.C.

Effect of anisotropy in commercial purity titanium on deep drawability at elevated temperatures
pp. 1037-1040(4)
Authors: Liu J.-M.,; Chou S.-S.,

Assessment and modelling of isothermal forging of intermetallic compounds. Part 3 - Ni₃Al
pp. 1041-1048(8)
Authors: Millett, J.C.F.; Brooks, J.W.; Jones, I.P.

Dynamic materials modelling concepts applied to analysis of hot rolling of commercial aluminium alloys
pp. 1049-1055(7)
Authors: Puchi Cabrera, E.S.; Villalobos Gutiérrez, C.; Castro Farinas, G.

Structural characteristics of M₂₃C₆ formed in chromised coatings on 11%Cr steels
pp. 1057-1066(10)
Authors: Castle, A.R.; Gabe, D.R.

Shot peening of plasma nitrided steel for fretting fatigue strength enhancement
pp. 1067-1072(6)
Authors: Li, C.X.; Sun, Y.; Bell, T.

Effect of alloying elements on properties and microstructures of Ti-V-Cr burn resistant alloys
pp. 1073-1075(3)
Authors: Zhao, Y.Q.; Zhu, K.Y.; Qu, H.L.; Wu, H.; Zhao, X.M.