Materials Science and Technology

Eutectoid transformation in Au-39 at.-%In
pp. 593-598(6)
Authors: Das, A.; Gust, W.; Mittemeijer, E.J.

Precipitation of chromium containing dispersoids in Al-Mg-Si alloys
pp. 599-604(6)
Authors: Lodgaard, L.; Ryum, N.

Effect of chromium content on electrical resistivity and tensile properties of Ti-Fe-Cr alloys
pp. 605-608(4)
Authors: Ikeda, M.; Komatsu, S.; Inoue, K.; Shiota, H.; Imose, T.

Thermoplastic shear localisation in titanium alloys during dynamic deformation
pp. 609-611(3)
Authors: Xu, Y.B.; Liu, L.; Yu, J.Q.; Shen, L.T.; Bai, Y.L.

Thermally and stress induced changes in three phase structure of Cu-Zn-Al-Fe shape memory alloy
pp. 612-616(5)
Authors: Bujoreanu, L.G.; Craus, M.L.; Stanciu, S.; Dia, V.

Assessment and modelling of isothermal forging of intermetallic compounds Part 2 - Ti₃ Al
pp. 617-624(8)
Authors: Millett, J.C.F.; Brooks, J.W.; Jones, I.P.

Carbon composition and temperature dependence of relative change in length during isothermal decomposition of Fe-C austenite
pp. 625-629(5)
Authors: Li C.-M.,; Sommer, F.; Mittemeijer, E.J.

Application of Koistinen and Marburger's athermal equation for volume fraction of martensite to diffusional transformations obtained on continuous cooling 0·13%C high strength low alloy steel
pp. 630-633(4)
Authors: Wilson, E.A.; Medina, S.F.

Influence of strain rate on recrystallisation- precipitation interaction in V, Nb, and V-Ti microalloyed steels
pp. 635-642(8)
Authors: Medina, S.F.; Quispe, A.

Quantitative research on effects of stresses and strains on bainitic transformation kinetics and transformation plasticity
pp. 643-647(5)
Authors: Liu, Z.; Yao, K.F.

Effect of thermomechanical treatment parameters on mechanical properties of duplex ferrite-martensite structure in dual phase steel
pp. 648-656(9)
Authors: Panda, A.K.; Ray, P.K.; Ganguly, R.I.

Quantitative phase analysis of duplex stainless steel using incomplete pole figures
pp. 657-662(6)
Authors: Bonarski, J.T.; Wróbel, M.; Pawlik, K.

Plastic flow of aluminium extruded under complex conditions
pp. 664-669(6)
Authors: Bochniak, W.; Korbel, A.

Application of model for work hardening behaviour of SiC reinforced magnesium based metal matrix composites
pp. 670-674(5)
Authors: Manoharan, M.; Gupta, M.; Lai, M.O.; Saravanaranganathan, D.

High strain rate superplasticity in powder metallurgy aluminium alloy 6061 + 20 vol.-%SiC_pcomposite with relatively large particle size
pp. 675-680(6)
Authors: Kim, W.J.; Lee, Y.S.; Moon, S.J.; Hong, S.H.

Gravity casting processing of brake discs: use of partially recycled (Al-Si-Mg)/SiC_p composite
pp. 681-686(6)
Authors: Badini, C.; La Vecchia, M.; Fino, P.; Cobelli, P.

Finite element method simulation of residual stresses in Al₂O₃-AISI 304 steel joints
pp. 687-691(5)
Authors: Travessa, D.N.; Ferrante, M.; den Ouden, G.

Simulation of inelastic response of multidirectional laminates based on stress failure criteria
pp. 692-698(7)
Author: Huang, Z.M.

Flow transitions in vacuum arc remelting
pp. 699-711(13)
Authors: Davidson, P.A.; He, X.; Lowe, A.J.

Low temperature processing of NiZn ferrite by citrate precursor method and study of properties
pp. 712-715(4)
Authors: Verma, A.; Goel, T.C.; Mendiratta, R.G.

Short communication Effects of tantalum addition on transformation behaviour of (Ni₅₁ Ti₄₉ )_1-x Ta_x and Ni₅₀ Ti_50-y Ta_y shape memory alloys
pp. 716-719(4)
Authors: Ma, J.L.; Wu, K.H.