Materials Science and Technology

Cooling behaviour and microstructure of rapidly solidified Ag-Cu alloys
pp. 721-725(5)
Authors: Ei-Benawy, T. A.; Ei-Mahallawy, N. A.; Taha, M. A.; Fredriksson, H.

Differential scanning calorimetry evidence of compositional modulation and giant magnetoelastic wave amplitude in electrodeposited Co-P ribbons
pp. 726-731(6)
Authors: Lanotte, L.; Germano, R.; Iannotti, V.; Nocera, A. Di; Loreti, S.

Effect of aluminiumon ordering of highly stabilised β-Ti-V-Cr alloys
pp. 732-737(6)
Authors: Li, Y. G.; Blenkinsop, P. A.; Loretto, M. H.; Walker, N. A.

Morphology of β-AIFeSi intermetallic in AI-7Si alloy castings
pp. 738-742(5)
Authors: Tang, S. K.; Sritharan, T.

Strain induced grain boundary migration in boron doped Ni₇₆AI₂₄
pp. 743-746(4)
Authors: Chaturvedi, M. C.; Verma, R. K.; Jena, A. K.

Effect of stress on transformation and prediction of residual stresses
pp. 747-750(4)
Authors: Liu, C. C.; Liu, Z.; Xu, X. J.; Chen, G. X.; Wu, J. Z.

Creep behaviour of single crystal nickel base superalloy
pp. 751-756(6)
Authors: Tian, S. G.; Zhang, J. H.; Zhou, H. H.; Yang, H. C.; Xu, Y. B.; Hu, Z. Q.

Effects of W substitution on ς and χ phase precipitation and toughness in duplex stainless steels
pp. 757-764(8)
Authors: Lee, Y. H.; Kim, K. T.; Lee, Y. D.; Kim, K. Y.

Hot deformation behaviour of SiC_p/2024 aluminium alloy composites reinforced with various sizes of SiC_p
pp. 765-769(5)
Authors: Ko, B. C.; Park, K.; Yoo, Y. C.

Generation of dislocations and subgrains in stir cast AI-6.2Si alloy during semisolid state processing
pp. 770-775(6)
Authors: Lee, J. I.; Kim, G. H.; Lee, H. I.

Computer modelling of wear resistance for plain carbon steels
pp. 776-782(7)
Authors: Basak, A.; Reddy, D. C.; Kanth, D. V. K.

Effects of hot deformation on austenite transformation in 10w carbon Mo-Nb and C-Mn steels
pp. 783-792(10)
Authors: Khlestov, V. M.; Konopleva, E. V.; Mcqueen, H. J.

Tensile properties of mechanically alloyed oxide dispersion strengthened iron alloys Part 1 - Neural networkmodels
pp. 793-809(17)
Authors: Badmos, A. Y.; Bhadeshia, H. K. D. H.; Mackay, D. J. C.

Wear characteristics of TiC reinforced cast iron composites Part 1 - Adhesive wear
pp. 810-815(6)
Authors: Galgali, R. K.; Ray, H. S.; Chakrabarti, A. K.

Characterisation of microstructure and its effect on rolling contact fatigue of induction hardened medium carbon bearing steels
pp. 816-821(6)
Authors: Choi, B. Y.; Bahng, G. W.

Effect of aluminising on high temperature oxidation resistance of TiAI cOmpounds
pp. 822-826(5)
Authors: Kim, S.; Paik, D.; Kim, I.; Kim, H.; Park, K.

Microstructural influence on sag resistance of Cr containing and Cr free spring steels
pp. 827-831(5)
Authors: Nam, W. J.; Lee, C. S.

Topology of grain deformation
pp. 832-834(3)
Authors: Singh, S. B.; Bhadeshia, H. K. D. H.

Hot working characteristics of Zr-2.5Nb using processing maps
pp. 835-837(3)
Authors: Murty, S. V. S. Narayana; Rao, B. Nageswara

Corrigenda to MST June 1998, Volume 14, pp. 566 and 570
pp. 838-838(1)