Discharge, microstructural and mechanical properties of ZrO2 addition on MgO for plasma display panel materials

Authors: Jufriadi1; Sutjipto, A.G.E.2; Othman, R.3; Muhida, R.4

Source: Materials Research Innovations, Volume 13, Number 3, September 2009 , pp. 149-152(4)

Publisher: Maney Publishing

Key:
Free Content - Free Content
New Content - New Content
Subscribed Content - Subscribed Content
Free Trial Content - Free Trial Content

Abstract:

One of the major parts in the plasma display panel is its protecting layer. MgO thin film has been widely used as a protective layer for dielectric materials. Adding another material to the MgO base material is an alternative method for improving its property as protective layer. A study on reducing the surface discharge potential of a single pure MgO protecting layer by the addition of ZrO2 with several compositions is presented in this paper. The microstructural and mechanical properties are also described. The discharge properties were measured utilising the flashover treeing for material characterisation, produced by a scanning electron microscope. The mechanical properties were measured using the pure bending moment. The MgO and ZrO2 powders with 99·95 and 99% purity were used for powder mixtures of various desired compositions. In this work, investigation was carried out for sintered samples at 1250°C for 24 h. From observation, ZrO2 addition into high purity MgO has influenced the properties of MgO. Since secondary electron emission coefficient contributes in increasing the electrical field of the surface, it could be found that 5 wt-%ZrO2 added MgO has the highest secondary electron emission coefficient because the charging and discharging process happened within a shorter time.

Keywords: SECONDARY ELECTRON EMISSION; MGO; ZRO2; PROTECTING LAYER; DISCHARGE PROPERTIES

Document Type: Research article

DOI: 10.1179/143307509X437473

Affiliations: 1: Department of Manufacturing and Materials Engineering, International Islamic University Malaysia, Jalan Gombak, 53100 Kuala Lumpur, Malaysia 2: Department of Manufacturing and Materials Engineering, International Islamic University Malaysia, Jalan Gombak, 53100 Kuala Lumpur, Malaysia;, Email: agus@iiu.edu.my 3: Department of Science in Engineering, International Islamic University Malaysia, Jalan Gombak, 53100 Kuala Lumpur, Malaysia 4: Department of Mechatronics Engineering, International Islamic University Malaysia, Jalan Gombak, 53100 Kuala Lumpur, Malaysia

The full text electronic article is available for purchase. You will be able to download the full text electronic article after payment.

$51.00 plus tax      Refund Policy

 

OR

Back to top

Key:
Free Content - Free Content
New Content - New Content
Subscribed Content - Subscribed Content
Free Trial Content - Free Trial Content
Share this item with others: These icons link to social bookmarking sites where readers can share and discover new web pages.
Page Help Click here for Page Help
Shopping cart
Tools
Sign in






Need to register?
Sign up here
Text size: A | A | A | A