Materials Research Innovations

ICFMD-2008
pp. 133-133(1)
Authors: Yahya, M.Z.A.; Arof, A.K.; Harun, M.K.; Subban, R.H.Y.; Winie, T.; Kudin, T.I.T.

Simulation for deposition of ZnO thin film layer by kinetic Monte Carlo method
pp. 135-138(4)
Authors: Dee, C.F.; Lee, J.D.; Sow, C.H.; Majlis, B.Y.; Hamzah, A.; Abdullah, H.; Lee, S.-K.

Nucleation and growth of chrysanthemum-like zinc oxide crystals using silicon dioxide
pp. 139-141(3)
Authors: Sahdan, M.Z.; Kamaruddin, S.A.; Mamat, M.H.; Amizam, S.; Rafaie, H.A.; Khusaimi, Z.; Saim, Hashim; Ahmed, A.Z.; Abdullah, S.; Noor, U.M.; Rusop, M.

Effect of Al concentration on structural and optical property ZnO thin films as antireflecting coating
pp. 142-144(3)
Authors: Habibi, S.; Abdullah, H.; Ariyanto, N.P.; Tasirin, S.M.; Yaakob, Z.; Dee, C.F.

Structural and optical properties of low temperature evaporated iron phthalocyanine thin films
pp. 145-148(4)
Authors: Tunhoo, B.; Nukeaw, J.

Discharge, microstructural and mechanical properties of ZrO₂ addition on MgO for plasma display panel materials
pp. 149-152(4)
Authors: Jufriadi,; Sutjipto, A.G.E.; Othman, R.; Muhida, R.

Preparation and characterisation of one-dimensional zinc oxide structure
pp. 153-156(4)
Authors: Mamat, M.H.; Sahdan, M.Z.; Amizam, S.; Rafaie, H.A.; Khusaimi, Z.; Ahmed, A. Zain; Abdullah, S.; Rusop, M.

Surface morphology characterisation of Sn-doped ZnO films for antireflective coating
pp. 157-160(4)
Authors: Ariyanto, N.P.; Abdullah, H.; Ghani, N.S.A.

Study of zirconium dioxide (ZrO₂) dielectric charges
pp. 161-164(4)
Author: Zoolfakar, A.S.

Organic/inorganic multilayer hybrid thin films: effect of substrate temperature
pp. 165-167(3)
Authors: Thiwawong, T.; Nukeaw, J.

Studies on optical and photoluminescence properties of a-CN_x thin films
pp. 168-170(3)
Authors: Rahman, Z.A.; Ritikos, R.; Rahman, S.A.

Correlations between reaction wave propagation and phase formations in combustion of diluted TiO₂-Al-C mixture
pp. 171-175(5)
Authors: Saw, L.H.; Rahbari, R.G.; Hamdi, M.; Yahya, R.

Effect of pH value on physical and optical properties of zinc oxide nanostructures
pp. 176-178(3)
Authors: Sahdan, M.Z.; Kamaruddin, S.A.; Mamat, M.H.; Amizam, S.; Rafaie, H.A.; Khusaimi, Z.; Saim, H.; Ahmed, A.Z.; Abdullah, S.; Noor, U.M.; Rusop, M.

Thermally induced ordering process of stoichiometric nanocrystalline Ni₃Al intermetallic
pp. 179-181(3)
Authors: Ismail, R.; Yaacob, I.I.

Modified fluidised floating catalyst thermal CVD method for preparing carbon nanotubes using Fe/Co/Al
pp. 182-184(3)
Authors: Azira, A.A.; Zainal, N.F.A.; Nik, S.F.; Khusaimi, Z.; Mohamad, F.; Kudin, T.I.T.; Soga, T.; Abdullah, S.; Rusop, M.

Au-doped zinc oxide nanostructure sensors for detection and discrimination of volatile organic compounds
pp. 185-188(4)
Authors: Wongchoosuk, C.; Choopun, S.; Tuantranont, A.; Kerdcharoen, T.

Synthesis of ZnO nanorods on porous silicon substrate using sol-gel method
pp. 189-191(3)
Authors: Amizam, S.; Mamat, M.H.; Khusaimi, Z.; Rafaie, H.A.; Sahdan, M.Z.; Abdullah, S.; Rusop, M.

Low temperature growth of Si nanowires via vapour-liquid-solid mechanism
pp. 192-195(4)
Authors: Ng, I.K.; Suzuki, H.

Surface morphology study on effect of deposition temperature on nanostructured zinc oxide by chemical vapour deposition method
pp. 196-198(3)
Authors: Khusaimi, Z.; Ghani, N.A.; Noor, F.W.M.; Amizam, S.; Rafaie, H.A.; Mamat, M.H.; Sahdan, M.Z.; Abdullah, N.; Abdullah, S.; Rusop, M.

Synthesis and characterisation of electrodeposited iron-platinum nanostructured thin films
pp. 199-202(4)
Authors: Teh, S.H.; Yaacob, I.I.

Influence of growth temperature on SnO₂ nanowires
pp. 203-206(4)
Authors: Tiong, T.Y.; Yahaya, M.; Dee, C.F.; Lim, K.P.; Majlis, B. Yeop; Sow, C.H.

Synthesis and structural properties of zinc oxide flower-like nanostructures by thermal chemical vapour deposition method
pp. 207-210(4)
Authors: Amizam, S.; Mamat, M.H.; Khusaimi, Z.; Sahdan, M.Z.; Abdullah, S.; Rusop, M.; Hartini, A.R.

Analysis and simulation of carriers statistic for semiconducting single wall carbon nanotube
pp. 211-213(3)
Authors: Karamdel, J.; Ahmadi, M.T.; Damghanian, M.; Majlis, B.Y.; Dee, C.F.; Ismail, R.

Effect of composition on phase transformation of iron-platinum nanoparticles
pp. 214-216(3)
Authors: Hyie, K.M.; Yaacob, I.I.

Nanostructured Fe₅₀Ni₅₀ alloy prepared by mechanical alloying: synthesis and characterisation
pp. 217-220(4)
Authors: Adzir, Y.; Yaacob, I.I.

Synthesis of graphitic nanofibres using iron (III) oxide catalyst for hydrogen storage application
pp. 221-224(4)
Authors: Sufian, S.; Yusup, S.; Walker, G.S.; Shariff, A.M.

Thermal properties and morphologies of poly(ethylene terephthalate) in blends with epoxidised natural rubber of 25 and 50 mol.-% of epoxy content
pp. 225-228(4)
Authors: Sulaiman, S.F.; Chan, C.H.; Harun, M.K.

Conductivity studies of Li₂O-TiO₂-P₂O₅ system
pp. 229-231(3)
Authors: Faizal, A.F.A.; Majid, S.R.; Subban, R.H.Y.

Studies on cellulose acetate-based gel polymer electrolytes for proton batteries
pp. 232-234(3)
Authors: Johari, N.A.; Kudin, T.I.T.; Ali, A.M.M.; Winie, T.; Yahya, M.Z.A.

Actuation mechanism of solid state polypyrrole actuator according to dopant size
pp. 235-238(4)
Authors: Lee, W.-K.; Song, Y.-M.; Ha, J.-M.; Park, H.; Lee, I.W.; Chun, H.H.; Jo, N.-J.

On complexation between methyl cellulose and ammonium nitrate
pp. 239-242(4)
Authors: Shuhaimi, N.E.A.; Majid, S.R.; Arof, A.K.

Conductivity studies of phosphonated methylcellulose membrane
pp. 243-245(3)
Authors: Noor, F.W.M.; Kudin, T.I.T.; Ali, A.M.M.; Latif, F.; Yahya, M.Z.A.

Relationship between average slope of textured substrate and poly-Si thin film solar cells performance
pp. 246-248(3)
Authors: Muhida, R.; Sutjipto, A.G.E.; Afzeri,; Toyama, T.; Okamoto, H.

Characterisation of Al₂O₃ doped hexanoyl chitosan-LiCF₃SO₃-EC polymer electrolytes
pp. 249-251(3)
Authors: Muhammad, F.H.; Subban, R.H.Y.; Majid, S.R.; Winie, T.; Arof, A.K.

Solid state proton battery using plasticised cellulose-salt complex electrolyte
pp. 252-254(3)
Authors: Saaid, S.I.Y.; Kudin, T.I.T.; Ali, A.M.M.; Ahmad, A.H.; Yahya, M.Z.A.

Electrical properties of PEO-LiCF₃SO₃-SiO₂ nanocomposite polymer electrolytes
pp. 255-258(4)
Authors: Abdullah, A.; Abdullah, S.Z.; Ali, A.M.M.; Winie, T.; Yahya, M.Z.A.; Subban, R.H.Y.

Conductivity studies on plasticised PEO/chitosan proton conducting polymer electrolyte
pp. 259-262(4)
Authors: Kadir, M. F. Z. Abdul; Teo, L.P.; Majid, S.R.; Arof, A.K.

Gel polymer electrolyte based on methyl-grafted natural rubber for proton batteries
pp. 263-265(3)
Authors: Kamisan, A.S.; Kudin, T.I.T.; Ali, A.M.M.; Yahya, M.Z.A.

Spectroscopic studies of chlorophyll a from Opuntia ficus-indica
pp. 266-268(3)
Authors: Rusli, M.S.; Abidin, Z.H.Z.; Taha, R.M.; Arof, A.K.

Electrochemical performance of anode material from palm oils derived carbon nanotubes for lithium ion batteries
pp. 269-271(3)
Authors: Kudin, T.I.T.; Zainal, N.F.A.; Ali, A.M.M.; Abdullah, S.; Rusop, M.; Sulaiman, M.A.; Yahya, M.Z.A.

Electrical conductivity of solvent free PEO based polymer electrolytes
pp. 272-274(3)
Authors: Abdullah, S.Z.; Abdullah, A.; Winie, T.; Ali, A.M.M.; Subban, R.H.Y.

Redox behaviour of crystalline LiFePO₄ prepared by chemical precipitation and low temperature sterilisation
pp. 275-277(3)
Authors: Sanusi, A.; Basirun, W.J.; Kufian, M.Z.; Arof, A.K.

Compatibility and conductivity of LiClO₄ free and doped polyacrylate - poly(ethylene oxide) blends
pp. 278-281(4)
Authors: Sim, L.H.; Gan, S.N.; Chan, C.H.; Kammer, H.W.; Yahya, R.

Conductivity study in PEO-LiOAc based polymer electrolyte
pp. 282-284(3)
Authors: Ismail, L.; Majid, S.R.; Arof, A.K.

Frequency dependent conductivity studies on PMMA-LiCF₃SO₃ polymer electrolytes
pp. 285-287(3)
Authors: Ali, A.M.M.; Bahron, H.; Subban, R.H.Y.; Kudin, T.I.T.; Yahya, M.Z.A.

Study of corrosion inhibition properties of metal oxide based core shell pigments in organic coatings
pp. 288-290(3)
Authors: Kalendova, A.; Vesely, D.; Nemec, P.

Synthesis and characterisation of aliphatic amides in application to surface protection
pp. 291-294(4)
Authors: Hashim, M.A.; Salleh, S.N.M.; Toff, M.R.M.

Corrosion inhibition efficiency of organic coatings with content of polyaniline phosphate
pp. 295-297(3)
Authors: Kalendova, A.; Vesely, D.; Stejskal, J.; Nemec, P.

Effects of double solvents/plasticisers on proton conducting gel polymer electrolytes
pp. 298-301(4)
Authors: Johari, N.A.; Kudin, T.I.T.; Winie, T.; Ali, A.M.M.; Yahya, M.Z.A.

Nanoparticles of soluble alkaline silicates as corrosion inhibitors in water based polymer dispersions
pp. 302-304(3)
Authors: Vesely, D.; Kalenda, P.; Nemec, P.

Investigation on effects of substituents in N,N′-dibensylidene ethane-1,2-diamine towards corrosion inhibition on steel in 1M HCl
pp. 305-308(4)
Authors: Sauri, A.S.M.; Kassim, K.; Bahron, H.; Yahya, M.Z.A.; Harun, M.K.

Characterisation of carbonated apatite for possible application in biomedical implants
pp. 309-312(4)
Authors: Zakaria, F.A.; Marsad, N.H.; Manaf, A. Y. Abdul; Villamil, M.; Montes, T.; Carretero, C.; Mikan, J.

Vegetal bioproducts with antioxidant activity for prophylactic and therapeutic effect
pp. 313-315(3)
Authors: Nichita, C.; Caraene, G.; Badea, N.; Giurginca, M.; Vaca-Garcia, C.; Meghea, A.

Enzymatic degradation study of porous chitosan membrane
pp. 316-319(4)
Authors: Zainol, I.; Ghani, S.M.; Mastor, A.; Derman, M.A.; Yahya, M.F.

Production of medical devices prototype through metal injection moulding technique
pp. 320-322(3)
Authors: Omar, M.A.; Subuki, I.; Abdullah, N.; Hassan, N.

Porcine model for hybrid material of carbonated apatite and osteoprogenitor cells
pp. 323-326(4)
Authors: Mikán, J.; Villamil, M.; Montes, T.; Carretero, C.; Bernal, C.; Torres, M.L.; Zakaria, F.A.

Preparation of porous alumina for biomedical applications through protein foaming-consolidation method
pp. 327-329(3)
Authors: Fadli, A.; Sopyan, I.

Role of silsesquioxane compounds used as 'building blocks' in sol-gel nanoencapsulation of retinyl palmitate
pp. 330-333(4)
Authors: Lacatusu, I.; Nita, R.; Badea, N.; Bojin, D.; Meghea, A.

Rice husk derived silica aerogel as chromatographic packing material for colour separation of purple orchid (Cattleya bowringiana) flower
pp. 334-336(3)
Authors: Maamur, K.N.; Jais, U.S.

Parchment behaviour under extreme heat and fire conditions
pp. 337-339(3)
Authors: Giurginca, M.; Lacatusu, I.; Miu, L.; Petroviciu, I.

Characteristic studies of collapsibility of ABS patterns produced from FDM for investment casting
pp. 340-343(4)
Authors: Harun, W.S.W.; Sharif, S.; Idris, M.H.; Kadirgama, K.

Gruneisen parameter and anharmonic contribution to temperature dependent ultrasonic velocity in RE based and Tl based superconductors with different oxygen contents
pp. 344-347(4)
Author: Yahya, A.K.

Structural analysis of homologous series of Zn_kIn₂O_k+3 (k=3, 5, 7) and Zn_kInGaO_k+3 (k=1, 3, 5) as thermoelectric materials
pp. 348-351(4)
Authors: Moriga, T.; Ishida, K.; Yamamoto, K.; Yoshinari, A.; Murai, K.-I.

Effect of annealing on microstructure and P-E hysteresis of vanadium doped SrBi₂Ta₂O₉
pp. 352-356(5)
Authors: Goel, P.; Ojha, V.N.; Yadav, K.L.

Oxygen response of hot spot on DyBa₂Cu₃O_7-x ceramic sensors fabricated under different heat treatments
pp. 357-360(4)
Authors: Hassan, M.; Yahya, A.K.

Effect of Bi₂O₃ content on properties of (Na₂O, K₂O)-SiO₂-CaO-Al₂O₃-B₂O₃ glass system
pp. 361-363(3)
Authors: Dararutana, P.; Dutchaneephet, J.; Pongkrapan, S.; Sirikulrat, N.; Wathanakul, P.

Superconductivity and enhancement of critical current density of Ta-substituted TlSr1212 with addition of nanosize MgO
pp. 364-367(4)
Authors: Yusof, M.I.; Salleh, Z.; Yahya, A.K.; Jumali, M.H.

Mechanosynthesis and reactive sintering of Ba_1-xSr_xTiO₃ ceramics
pp. 368-371(4)
Authors: Ortíz, R. A. Vargas; Munoz-Saldana, J.; Espinoza-Beltrán, F.J.

Effects of Al and Cr substitutions for Cu on superconductivity and structure of EuBaSrCu₃O_7-δ ceramics
pp. 372-374(3)
Authors: Musa, B.; Yahya, A.K.

PZT ferroelectric ceramics obtained by sol-gel method using 2-metoxyethanol route for pyroelectric sensors
pp. 375-378(4)
Authors: Rivera-Ruedas, M.G.; Flores-Noria, J.R.; Rodríguez, F. J. García; Muñoz-Saldaña, J.; Bucio-Hernández, Y.; Garnica-Romo, M.G.; Avalos-Borja, M.; Yáñez-Limón, J. M.

Superconducting properties and mechanical strength of MgO fibres reinforced bulk Bi-2212 superconductor ceramics
pp. 379-381(3)
Authors: Hamid, N.A.; Shamsudin, N.F.; See, K.W.

Influence of concentration of pore forming agent on porosity of SiO₂ ceramic from rice husk ash
pp. 382-385(4)
Authors: Manap, N.R.A.; Jais, U.S.

Magneto-transport studies on La_2/3Ba_1/3(Mn_1-xAl_x)O₃ for low field sensing applications
pp. 386-390(5)
Authors: Abdullah, H.; Halim, S.A.; Lim, K.P.; Jannah, A.N.

Surface texture and tetragonality of mechanically affected powders and sintered ceramics of BaTiO₃
pp. 391-395(5)
Authors: Hurtado-Macias, A.; Torres-Heredia, V.; Muñoz-Saldaña, J.; Beltrán, F. J. Espinoza; Ortiz, R. A. Vargas; Torres-Torres, D.; Landaverde, M. A. Hernández; González-Hernández, J.

Growth and characterisation on giant magnetoresistance property of metallic multilayers
pp. 396-399(4)
Authors: Kok, K.-Y.; Ng, I.-K.

Electrical transport and low-field magnetoresistance properties of (La_1-xYb_x)_2/3Ca_1/3MnO₃ (x=0 to 0·12) ceramics
pp. 400-402(3)
Authors: Aini, N.A.; Yusof, M.I.M.; Huda, N.; Mohamed, Z.; Yahya, A.K.

Nanoparticles as flux pinning centre in bulk and Ag sheathed Bi_1·6Pb_0·4Sr₂Ca₂Cu₃O₁₀ high temperature superconductor tapes
pp. 403-405(3)
Authors: Abd-Shukor, R.; Kong, W.

Effects of Cu substitution on superconductivity and excess conductivity of Tl_1-xCu_xSr_1·8Yb_0·2CaCu₂O_7-δ (x=0-0·6) ceramics
pp. 406-408(3)
Authors: Huda, N.; Yahya, A.K.

Biomonitoring as assessment of human exposure to heavy metals. Speciation of Hg in fish food and impact on human health
pp. 409-412(4)
Authors: Prodana, M.; Murariu, A.; Meghea, A.; Demetrescu, I.