• Home
• About us
•  

  • Article title, keywords or abstract
  • Article title
  • Publication title
  • Author
• Advanced search

• Subject
• Publisher
• Publication
• Browse by:

International Journal of Cast Metals Research

ISSN 1364-0461

 

all issues

• Surface recrystallisation and oxidation of polycrystalline superalloy castings during isothermal exposure at 1100°C
  Authors: W. G. Jiang; M. C. Yang; L. H. Lou; Z. Q. Hu
  Appeared or available online: April 20, 2012

• Using sol–gel component as additive to foundry coatings to improve casting quality
  Authors: U. Nwaogu ; T. Poulsen ; B. Gravesen ; N. Tiedje
  Appeared or available online: April 20, 2012

• Effect of main alloying elements on strength of Al–Si foundry alloys at elevated temperatures
  Authors: F. Stadler ; H. Antrekowitsch ; W. Fragner ; H. Kaufmann ; P. J. Uggowitzer
  Appeared or available online: April 20, 2012

• Superheat influence on mechanical properties of cast hypoeutectic aluminium–silicon alloy
  Authors: S. D. Moshood ; S. A. Ibitoye ; O. J. Olawale ; P. A. Popoola
  Appeared or available online: April 20, 2012

• Preparation of non-dendritic microstructure of AM60 alloy for rheoforming using self-inoculation method
  Authors: B. Xing; Y. D. Li; Y. Ma; T. J. Chen; Y. Hao
  Appeared or available online: March 20, 2012

• Effects of process parameters on microstructure and properties of AZ91 alloy prepared by cooling/stirring and rolling process
  Authors: R. G. Guan ; Z. Y. Zhao ; F. R. Cao ; C. Lian ; C. S. Lee ; C. M. Liu
  Appeared or available online: March 20, 2012

• Heat transfer at the casting/chill interface during solidification of commercially pure Zn and Zn base alloy (ZA8)
  Authors: G. Ramesh; K. N. Prabhu
  Appeared or available online: March 1, 2012

• Modelling approach for quantitative prediction of macroshrinkage and microshrinkage in A356 sand mould castings
  Author: L. Nastac
  Appeared or available online: February 29, 2012

• Influence of melt purification on mechanical properties of AZ31 magnesium alloy
  Authors: J. Wang ; X. G. Dong; Y. S. Yang
  Appeared or available online: February 29, 2012

• Effect of oxide film defects generated during mould filling on mechanical strength and reliability of magnesium alloy castings (AZ91)
  Authors: A. R. Mirak ; M. Divandari ; S. M. A. Boutorabi ; J. A. Taylor
  Appeared or available online: February 29, 2012

• Interface reaction study of SiC reinforced Mn13 composite synthesised by metal infiltration
  Authors: Y. P. Ma; X. L. Li; C. H. Wang; L. Yang
  Appeared or available online: February 29, 2012

• Effects of Zr addition on as cast microstructure, tensile and creep properties of Mg–3.8Zn–2.2Ca magnesium alloy
  Authors: J. M. Peng ; M. B. Yang ; Y. Zhu ; F. S. Pan
  Appeared or available online: February 29, 2012

• Effect of rapid heating on quality assessment of 356 and 319 aluminium cast alloys using fluidised bed
  Authors: Kh. A. Ragab ; A. M. A. Mohamed ; A. M. Samuel ; F. H. Samuel ; A. M. A. Al-Ahmari
  Appeared or available online: February 23, 2012

• Thermomechanical simulation and experimental characterisation of hot tearing during solidification of aluminium alloys
  Authors: Y. He ; S. Li ; K. Sadayappan ; D. Apelian
  Appeared or available online: February 23, 2012

• Particle erosion of die cast Al–14Si alloy and influence of friction stir process
  Authors: T. W. Cheng; L. H. Chen; T. S. Lui
  Appeared or available online: February 23, 2012

all issues