Ironmaking & Steelmaking

Book notes
pp. 97-97(1)
Author: Hull, Mark

Reg Mayorcas
pp. 98-98(1)

Sir Henry Bessemer Lecture and Master Class/Innovation in the iron and steel industry
pp. 98-98(1)

Effect of ore properties on sinter bed permeability and strength
pp. 99-108(10)
Authors: Ellis, B.G.; Loo, C.E.; Witchard, D.

A neural network based model of sinter quality and sinter plant performance indices
pp. 109-114(6)
Authors: Laitinen, P.J.; Saxén, H.

Coke formation possibility during production of reducing gas in large scale direct reduction plant
pp. 115-123(9)
Authors: Sadri, M.; Vakhshouri, K.; Hashemi, M.M.Y.M.

Thermal conductivity of CaO-SiO₂-Al₂O₃ glassy slags: Its dependence on molar ratios of Al₂O₃/CaO and SiO₂/Al₂O₃
pp. 124-130(7)
Authors: Susa, M.; Watanabe, M.; Ozawa, S.; Endo, R.

Concentrating of vanadium oxide in vanadium rich phase(s) by addition of SiO₂ in converter slag
pp. 131-137(7)
Authors: Yu, L.; Dong, Y.C.; Ye, G.Z.; Sichen, Du

Online measurement and application of mould friction in continuous slab casting
pp. 138-144(7)
Authors: Wang, X.D.; Yao, M.; Du, B.; Fang, D.C.; Zhang, L.; Chen, Y.X.

Static recrystallisation kinetics of austenite in Ti, Nb and V microalloyed steels during hot deformation
pp. 145-150(6)
Authors: Chatterjee, S.; Verma, A.K.; Mukhopadhyay, A.

Flow behaviour and microstructural evolution of 53Fe-26Ni-15Cr superalloy during hot compression test
pp. 151-156(6)
Authors: Salehi, A.R.; Taheri, A. Karimi

System for on/offline prediction of mechanical properties and microstructural evolution in hot rolled steel strip
pp. 157-165(9)
Authors: Tamminen, P.; Ruha, P.; Kömi, J.I.; Katajarinne, T.; Kauppi, T.A.; Marttila, J.P.; Karjalainen, L.P.

Prediction of shape defects over length of cold rolled sheet using artificial neural networks
pp. 166-176(11)
Authors: Raju, D.V.; Iqbal, A.; Trivedi, A. Kumar; Mukhopadhyay, A.

Increasing sequence length: process development and optimisation at the slab caster of Columbus Stainless
pp. 177-184(8)
Author: Sutcliffe, N.

Slab quality improvement by controlling mould fluid flow
pp. 185-191(7)
Authors: Kumar, D. Satish; Rajendra, T.; Sarkar, A.; Karande, A.K.; Yadav, U.S.