Powder Metallurgy and Metal Ceramics

Behavior of admixtures in a weakly conducting porous medium with fluids under pulsed pressure excited by an electric discharge
pp. 511-519(9)
Authors: Sizonenko, O.; Raichenko, A.; Kosenkov, V.

Effect of interaction between the structural components of W-Co-Sn pseudo-alloys on the kinetics of their compaction during liquid-phase sintering
pp. 520-525(6)
Authors: Nizhenko, V.; Petrishchev, V.; Skorokhod, V.

Effect on composite tribological properties of different fillers and methods for introduction into polytetrafluoroethylene
pp. 526-530(5)
Authors: Kostornov, A.; Nenakhov, A.

Development of predictable secondary structures in materials for high-temperature bearings
pp. 531-539(9)
Authors: Roik, T.; Shevchuk, Yu.

Structural and phase transformations in electrical spark modification in a ceramic-ceramic system
pp. 540-546(7)
Authors: Podchernyayeva, I.; Panashenko, V.; Grigor'ev, O.; Panasyuk, A.; Subbotin, V.

Characteristics of monolayer and multilayer titanium nitride plasmochemical coatings
pp. 547-552(6)
Authors: Ivashchenko, L.; Porada, O.; Ivashchenko, V.; Zakiev, I.; Dub, S.; Timofeeva, I.

Phase diagram of the Al₂O₃-ZrO₂-Er₂O₃ system. I. Isothermal sections at 1250 and 1650°C
pp. 553-562(10)
Authors: Lakiza, S.; Red'ko, V.; Lopato, L.

The phase equilibrium diagram for the Fe-Nb-Ti System
pp. 563-568(6)
Authors: Shurin, A.; Dmitrieva, G.; Cherepova, T.; Gavrilenko, I.

Phase equilibria and thermodynamics of binary copper systems with 3d-metals. IV. Copper-manganese system
pp. 569-581(13)
Authors: Turchanin, M.; Agraval, P.; Abdulov, A.

Phase transformations and change in TiNi intermetallic compound structure during destructive hydrogenation and recombination
pp. 582-587(6)
Authors: Bratanich, T.; Get'man, O.; Dobrovol'skii, V.; Kopylova, L.; Krapivka, N.; Permyakova, T.; Skorokhod, V.

Formation of oxide films on the surface of tungsten disilicide during anodic oxidation
pp. 588-592(5)
Authors: Chirkin, A.; Lavrenko, V.; Panasyuk, A.; Talash, V.

Effect of pulse duration and size of interelectrode interval on electric-spark spraying. I. Effect of pulse duration and size of interelectrode interval on rate of electric-spark transfer
pp. 593-598(6)
Authors: Belik, V.; Litvin, R.; Koval'chenko, M.

Damping properties of sintered high-porosity materials based on powders and discrete copper fibers
pp. 599-604(6)
Authors: Lugovskoi, Yu.; Chernyshev, L.

Certain features of warm isothermal compression of iron powder
pp. 605-609(5)
Authors: Maslyuk, V.; Sosnovskii, L.; Minitskii, A.; Gaiduchenko, A.

Granulometric characteristics of tungsten carbide-based powders
pp. 610-613(4)
Authors: Boiko, V.; Nikolenko, S.; Dvornik, M.