Powder Metallurgy and Metal Ceramics

Modification of Powder Fillers in Order to Improve Operating Properties of Composite Polymer-Based Materials
pp. 219-222(4)
Authors: Igor I. Beloborodov; Svetlana V. Sukhostavets

Milling of Carbide-Steel Powder Components and Their Mixtures in an Attrition Mill
pp. 223-228(6)
Authors: Tatyana M. Pavlygo; Leonid G. Plomod'yalo; Roman L. Plomod'yalo; Lev. I. Svistun

Effect of Shell Dimensions on Compaction and Shape Change during SHS-Pressing
pp. 229-235(7)
Authors: Alexander P. Amosov; Vladimir P. Radchenko; Alexander F. Fedotov

Effect of the Dimensional Factor on Sintering Composites of the System W – Sc₂O₃
pp. 236-241(6)
Authors: Olga I. Get'man; Valentina V. Panichkina; Valerii V. Skorokhod

Study of the Interaction of Adhesion-Active Copper-Silver Alloy PSR-40 with Stainless Steel of the Austenitic Class
pp. 242-246(5)
Authors: Anatolii G. Kostornov; Olga I. Fushchich

Adhesive Strength of Material Joints for Orthopaedic Stomatology
pp. 247-250(4)
Authors: Anatolii V. Besov National Technical University of Ukraine «Kiev Polytechnic Institute”Prospect Pobedy 37 Kiev Ukraine 04056 Email mefuserf.ntu-kpi.kiev.ua

Laws of Formation of Electrospark Coatings from Alloys of the Ni – Cr – Al – Y System
pp. 251-257(7)
Authors: Alexander V. Paustovskii; Raisa A. Alfintseva; Tatyana V. Kurinnaya; Valentina V. Pogorelaya; Stepan N. Kirilenko

Influence of the Structure and Properties OF WC – Co Alloy Powders on the Structure and Wear-Resistance of Detonation Coatings
pp. 258-264(7)
Authors: Valerii E. Oliker; Eugenii F. Grechishkin; Vsevolod V. Polotai; Mikhail G. Loskutov; Izabella I. Timofeeva

Relationship between Erosion and Mechanical Characteristics of Fine-Grained Hard Alloy WC – 16% Co Obtained by Solid-Phase and Liquid-Phase Consolidation. Part 1. Erosion Resistance
pp. 265-272(8)
Authors: Galina A. Bovkun; Anatolii V. Laptev

Free Surface Energy as a Criterion for the Sequence of Intermetallic Layer Formation in Reaction Couples
pp. 273-279(7)
Author: Valentin I. Nizhenko

Thermodynamic Analysis of High-Temperature Oxidation of Material in the Cr – TiB₂ – TiSi₂ System in Air
pp. 280-283(4)
Authors: Tamara M. Evtushok; Stanislav P. Gordienko

Heat Capacity and Enthalpy of Bi₂Si₃ and Bi₂Te₃ in the Temperature Range 58-1012 K
pp. 284-290(7)
Authors: Nikolai P. Gorbachuk; Vladislav R. Sidorko

Phase Formation in Sintering of Materials Based on Silicon Nitride with Li₂CO₃ and AlN Additives
pp. 291-294(4)
Authors: Oleg N. Grigor'ev; Alla A. Rogozinskaya; Tatyana V. Dubovik

High-Temperature Corrosion of AlN-Based Composite Ceramic in Air and in Combustion Products of Commercial Fuel. Part 2. Corrosion of Ceramic Composites in the AlN – SiC – TiB₂ System in Air and in Combustion Products of Kerosene and Diesel Fuel
pp. 295-304(10)
Authors: Vladimir A. Lavrenko; D. J. Baxter; Alla D. Panasyuk; Martina Desmaison-Brut

Methods of Protecting VKh-2K Alloy from High-Temperature Gas and Salt Corrosion
pp. 305-310(6)
Authors: Ivan V. Oryshich; Nelli E. Poryadchenko

Formation of Quasicrystals and Related Structures in Systems of Aluminum with Transition Metals. Part 2. Binary Systems Formed by Aluminum with 4d and 5d Metals
pp. 311-322(12)
Authors: Benjamin Grushko; Tamara Ya. Velikanova

Izrail Duvidovich Radomysel'skii (1914-1986)
pp. 323-326(4)