Powder Metallurgy and Metal Ceramics

Porous Structure of Powders Prepared with Heat Treatment of Gels from Tin (IV) and Antimony (III) Hydroxides
pp. 1-7(7)
Authors: Lobunets T.F.; Rogozinskaya A.A.

Dynamics of Mechanical Actions on Materials. Part 12. Static Loading of a System with Two Irreversibly Deformable Bodies
pp. 8-11(4)
Authors: Koval'chenko M.S.

Evaluation of the Porosity of Bars Extruded from an Uncompacted Metal Billet
pp. 12-18(7)
Author: Sokolov M.V.

Borided Hot-Worked Powder Materials Based on Iron. Part 1. Kinetics of Diffusion Boriding for Powder Materials
pp. 19-24(6)
Author: Dorofeev V.Y.

Synthesis and Sintering of Nanocrystalline Barium Titanate Powder under Non-Isothermal Conditions. Part 6. Structure, Grain Boundaries, and Dielectric Properties of Barium Titanate Obtained by Various Sintering Methods
pp. 25-33(9)
Authors: Ragulya A.V.; Skorokhod V.V.

Powder Metallurgy Wear-Resistant Materials Based on Iron. Part 1. Materials Prepared by Sintering and Infiltration
pp. 34-39(6)
Authors: Baglyuk G.A.; Posnyak L.A.

Sintered Antifriction Materials for Use at Elevated Temperatures
pp. 40-43(4)
Author: Shevchuk Y.F.

Formation of a Corrosion-Resistant Layer on Steel by Reaction with a Si3N 4 — Al2O3 Composite under the Conditions of Light-Thermal Treatment
pp. 44-48(5)
Authors: Podchernyaeva I.A.; Lavrenko V.A.

Some Characteristic Features of Formation of Ceramics Based on Composite Powders SiC — Si3N4 — Si2N2O
pp. 49-53(5)
Authors: Davidchuk N.K.; Gadzyra N.F.; Gnesin G.G.

Heat Capacity of Gadolinium Germanides at Low Temperatures
pp. 54-57(4)
Author: Bolgar A.S.

Reaction of Titanium with Boron Nitride under Self-Propagating High-Temperature Synthesis Conditions
pp. 58-60(3)
Author: Gordienko S.P.

Interactions in Molten Aluminum (Silicon) — Boron Alloys
pp. 61-64(4)
Author: Sudavtsova V.S.

Wetting of Hot-Pressed Aluminum Borides and Borocarbides by Molten Aluminum and Copper
pp. 65-70(6)
Author: Kharlamov A.I.

Mesostructuring in Sintered Hard Alloys
pp. 71-76(6)
Author: Lisovskii A.F.

Structural Features and Properties of Alloy 84% WC — 16% Co, Obtained by Hot Pressing in the Solid and Liquid Phases. Part 2. Influence of the Temperature at which the Specimens are Made on Their Physicomechanical Properties
pp. 77-83(7)
Author: Laptev A.V.

Structuring of Multiphase Compacts in the SiC — Carbon System. Part 1. Structuring in Green Blanks
pp. 84-89(6)
Authors: Dyban' Y.P.

Reducing the Danger of Explosions in the Production of Powders of Iron and Its Alloys by Methods that Involve Mechanical Comminution
pp. 90-95(6)
Author: Neikov O.D.