The Formation of Porous Membranes by Filtration of Aerosol Nanoparticles

Authors: Andersen S.K.1; Johannessen T.1; Mosleh M.1; Wedel S.1; Tranto J.2; Livbjerg H.1

Source: Journal of Nanoparticle Research, Volume 4, Number 5, October 2002 , pp. 405-416(12)

Publisher: Springer

Key:
Free Content - Free Content
New Content - New Content
Subscribed Content - Subscribed Content
Free Trial Content - Free Trial Content

Abstract:

Flame-generated aerosol particles of Al2O3 were deposited by gas filtration on two types of porous and ceramic tubes of alpha-Al2O3 with mean pore diameters of 450 and 2700 nm, respectively. The particles were aggregates with average mobility diameters in the range of 30–100 nm and primary particle diameters of 4–8 nm. The particles are characterized by differential mobility analysis, transmission electron microscopy, and by their specific surface area. The deposited membranes are characterized by gas permeability measurements, scanning electron microscopy, and by their pore size distribution from nitrogen capillary condensation. The particles form a distinct, homogeneous membrane layer with a porosity of sim90% on top of the substrate surface and only penetrate slightly into the substrate structure. The mean pore sizes of the deposited membranes determined by nitrogen condensation agree approximately with those determined by gas permeation and the specific surface area. The mean pore diameter varies in the range of 30–70 nm. The gas permeability of the deposited membranes is related to the specific surface area but influenced by the high porosity. The mean pore size and the permeability of the membranes are almost independent of the substrate structure.

The development of a membrane with uniform properties is preceded by a short initial period in which the deposited particles, with an equivalent membrane thickness of roughly 2 mum, have a significantly lower permeability than the ultimately developed uniform membrane layer. This effect is particularly significant for the aerosol particles with the lowest mean size, probably due to particles deposited in the pore mouths of the substrate.

The particles and the deposited membranes are X-ray amorphous but retain their specific surface area on heating to even high temperatures. When the membranes are heated to 1473 K for 10 h, X-ray diffraction shows a mixture of theta- and alpha-alumina, accompanied by a partial disintegration of the membrane and a considerable loss of surface area.

Keywords: alumina; constant-pressure filtration; dynamic membranes; nanoparticles; particle deposition; porous membranes

Language: English

Document Type: Research article

Affiliations: 1: Department of Chemical Engineering, Technical University of Denmark, DK-2800 Lyngby, Denmark 2: Haldor Topsøe A/S, DK-2800 Lyngby, Denmark; Author for correspondence

The full text electronic article is available for purchase. You will be able to download the full text electronic article after payment.

$47.00 plus tax      Refund Policy

 

OR

Back to top

Key:
Free Content - Free Content
New Content - New Content
Subscribed Content - Subscribed Content
Free Trial Content - Free Trial Content
Share this item with others: These icons link to social bookmarking sites where readers can share and discover new web pages.
Page Help Click here for Page Help
Shopping cart
Tools
Sign in






Need to register?
Sign up here
Text size: A | A | A | A