< previous issue
next issue >
Ways for improving the properties of semiproducts from V96Ts-3-type high-strength aluminum alloys of the Al – Zn – Mg – Cu system
Elagin, V.; Samarina, M.; Zakharov, V.
Special features of microcomposite structurization of ferrite in iron with elevated silicon content
Simulation of crystallization process of iron with globular graphite
Control of the process of direct manganese alloying of alloys
Dzhandieri, G.; Surguladze, T.; Robakidze, D.; Shalamberidze, M.; Shchukin, B.
Microalloying of alloys of the Sn – Ag – Cu system
Perevezentsev, B.; Kurmaev, M.
Volume-surface hardening of freight bogie springs from steels with reduced and controlled hardenability
Fedin, V.; Borts, A.
Effect of heat treatment on corrosion resistance of steel 0Cr18Ni9Ti
Li Hua, Gong; Yu, Zhang
Properties of metastable steel 03Kh14N11K5M2YuT after thermoplastic treatment
Mal’tseva, L.; Zavalishin, V.; Mikhailov, S.; Ozerets, N.; Mal’tseva, T.; Sharapova, V.
Thermodynamic analysis of nanocrystalline and amorphous NbCr2 intermetallic produced by mechanical alloying followed by hot pressing
Nie, Xiao-wu; Lu, Shiqiang; Wang, Kelu
Structural transformations in steel 12Kh12M1BFR due to high-energy milling with additives of fullerenes and carbon nanotubes
Glebov, V.; Popova, O.; Bakulina, A.; Chukanov, A.; Yagodkin, Yu.; Shchetinin, I.
Nature of the multistage transformation in shape memory alloys upon heating
Sun, L.; Huang, W.
Special features of transformations, structure and properties of molybdenum high-speed steels
Kremnev, L.; Onegina, A.; Vinogradova, L.
Formation of the stress-relieved structure in the welded region of gas tungsten–arc–welded armor steel with the help of heat distribution
Karaaslan, A.; Akca, C.
Damping properties of iron-manganese antifriction alloys with different types of crystal lattice
Volynova, T.; Lushkin, M.; Buravlev, I.
Compressive deformability of hardened titanium alloy VT16
Xingwu, Li; Masyue, Sha; Junpeng, Chu
Structure and properties of corrosion-resistant coatings deposited by electron-beam facing in air
Poletik, I.; Ivanov, Yu.; Golkovskii, M.; Krylova, T.; Perovskaya, M.
Effect of diamond smoothening on the structure and properties of the deposited metal in the laser-affected zone
Razumov, M.; Zubkov, N.; Afanas’eva, L.
Here are a few pages on the site that we think you may find useful: