Metallurgical and Materials Transactions A

The Limiting Speeds of Dislocations
pp. 811-814(4)
Author: Gilman, John J.

Comparison between High and Low Strain-Rate Deformation of Tantalum
pp. 815-823(9)
Authors: Kapoor, Rajeev; Nemat-Nasser, Sia

Influence of Alloying Elements on the Strain Rate and Temperature Dependence of the Flow Stress of Steels
pp. 825-830(6)
Authors: Schulze, V.; Vöhringer, O.

Damage Leading to Ductile Fracture under High Strain-Rate Conditions
pp. 831-844(14)
Authors: Fowler, J.P.; Worswick, M.J.; Pilkey, A.K.; Nahme, H.

Quantitative Description of Damage Evolution in Ductile Fracture of Tantalum
pp. 845-851(7)
Authors: Rivas, J.M.; Zurek, A.K.; Thissell, W.R.; Tonks, D.L.; Hixson, R.S.

Simulation of Shear Plugging through Thin Plates Using the GRIM Eulerian Hydrocode
pp. 853-860(8)
Authors: Church, P.; Cornish, R.; Cullis, I.; Lynch, N.

The Role of Plasticity in Bimaterial Fracture with Ductile Interlayers
pp. 863-872(10)
Authors: Tymiak, N.I.; Volinsky, A.A.; Kriese, M.D.; Downs, S.A.; Gerberich, W.W.

Effect of Fiber Volume Fraction on the Fracture Behavior of Nb-1 Wt Pct Zr/218W Composites at Elevated Temperatures
pp. 873-887(15)
Authors: Raj, S.V.; Ghosn, L.J.

Texture and Residual Strain in Two SiC/Ti-6-2-4-2 Titanium Composites
pp. 889-898(10)
Authors: Rangaswamy, P.; Daymond, M.R.; Bourke, M.A.M.; Von Dreele, R.; Bennett, K.; Jayaraman, N.

Strength and Failure Behavior of Stitched Carbon/Epoxy Composites
pp. 899-909(11)
Authors: Kamiya, Ryuta; Chou, Tsu-Wei

Damage Mechanisms and Fiber Orientation Effects on the Load-Bearing Capabilities of a NEXTEL/BLACKGLAS Low-Cost Ceramic Composite
pp. 911-920(10)
Authors: Zhao, W.; Liaw, P.K.; Belardinelli, R.; Joy, D.C.; Brooks, C.R.; McHargue, C.J.

Deformation and Fracture of a Particle-Reinforced Aluminum Alloy Composite: Part I. Experiments
pp. 921-936(16)
Authors: Pandey, A.B.; Majumdar, B.S.; Miracle, D.B.

Deformation and Fracture of a Particle-Reinforced Aluminum Alloy Composite: Part II. Modeling
pp. 937-950(14)
Authors: Majumdar, B.S.; Pandey, A.B.

The Interactive Role of Inclusions and SiC Reinforcement on the High-Cycle Fatigue Resistance of Particle Reinforced Metal Matrix Composites
pp. 951-957(7)
Authors: Chawla, N.; Andres, C.; Davis, L.C.; Jones, J.W.; Allison, J.E.

The Quasi-Static and Cyclic Fatigue Fracture Behavior of 2014 Aluminum Alloy Metal-Matrix Composites
pp. 959-974(16)
Authors: Srivatsan, T.S.; Annigeri, R.

Atom Probe Field Ion Microscopy Investigation of Boron Containing Martensitic 9 Pct Chromium Steel
pp. 975-984(10)
Authors: Hofer, P.; Miller, M.K.; Babu, S.S.; David, S.A.; Cerjak, H.

Grain Boundary Faceting and Abnormal Grain Growth in Nickel
pp. 985-994(10)
Authors: Lee, Sung Bo; Hwang, Nong Moon; Yoon, Duk Yong; Henry, Michael F.

The Effect of Microstructural Banding on Failure Initiation of HY-100 Steel
pp. 995-1005(11)
Authors: Chae, D.; Koss, D.A.; Wilson, A.L.; Howell, P.R.

Mechanical Behavior of a Fine-Grained Duplex γ-TiAl Alloy
pp. 1006-1015(10)
Authors: Jin, Z.; Cady, C.; Gray, G.T.; Kim, Y.W.

Preparation and Mechanical Properties of Highly Densified Nanocrystalline Al
pp. 1017-1024(8)
Authors: Sun, X.K.; Cong, H.T.; Sun, M.; Yang, M.C.

Interactions between Mechanical and Environmental Variables for Short Fatigue Cracks in a 2024-T3 Aluminum Alloy in 0.5M NaCl Solutions
pp. 1025-1034(10)
Authors: Wan, K.C.; Chen, G.S.; Gao, M.; Wei, R.P.

A Process Model for the Heat-Affected Zone Microstructure Evolution in Duplex Stainless Steel Weldments: Part II. Application to Electron Beam Welding
pp. 1035-1048(14)
Authors: Hemmer, H.; Grong, .; Klokkehaug, S.