Metallurgical and Materials Transactions A

Investigation on the cold deformation strengthening mechanism in MP159 alloy
pp. 5-13(9)
Authors: Lu, Shiqiang; Shang, Baozhong; Luo, Zijian; Wang, Renhui; Zeng, Fangchang

Early-stage widmanstatten growth of the γ phase in a duplex steel
pp. 15-19(5)
Authors: Shek, C.; Lai, J.; Wong, K.; Dong, C.

Substructural changes during hot deformation of an Fe-26Cr ferritic stainless steel
pp. 21-27(7)
Authors: Gao, Fei; Song, Baoyun; Xu, Yourong; Xia, Kenong

A numerical and experimental study of the rate of transformation in three directionally grown peritectic systems
pp. 29-34(6)
Authors: Ha, H.; Hunt, J.

Mechanical properties, microstructural stability and kinetics of σ-phase formation in 29Cr-6Ni-2Mo-0.38N superduplex stainless steel
pp. 35-45(11)
Authors: Nilsson, J.; Kangas, P.; Wilson, A.; Karlsson, T.

Selective oxidation and internal nitridation during high-temperature exposure of single-crystalline nickel-base superalloys
pp. 47-56(10)
Authors: Krupp, U.; Christ, H.

Thin-wall back extrusion of partially remelted semi-solid Sn-Pb
pp. 57-62(6)
Authors: Basner, T.; Sachdev, A.; Pehlke, R.

Thermal activation of fatigue damage
pp. 63-69(7)
Authors: Baxter, William; Lesuer, Donald; Syn, Chol

The fracture resistance of a binary TiAl alloy
pp. 71-80(10)
Authors: Chan, Kwai; Onstott, Jessica; Kumar, K.

Part II. Metallurgical factors governing the H-assisted intergranular cracking of peak-aged Ti-3Al-8V-6Cr-4Mo-4Zr (beta-C)
pp. 81-92(12)
Authors: Gaudett, Michelle; Scully, John

The use of the finite-element method to design an optimized tool for the plain-strain punch stretching test
pp. 93-98(6)
Authors: Kim, Youngsuk; Kwon, Youngdoo; Nam, Jaebok; Chu, Manseok

Effect of intermediate annealing on texture evolution and plastic anisotropy in an Al-Mg autobody alloy
pp. 99-107(9)
Authors: Li, Saiyi; Kang, Suk-Bong; Ko, Hung-Suk

Fatigue crack path prediction in UDIMET 720 nickel-based alloy single crystals
pp. 109-123(15)
Authors: Reed, P.; Sinclair, I.; Wu, X.

On methane generation and decarburization in low-alloy Cr-Mo steels during hydrogen attack
pp. 125-137(13)
Authors: Schlogl, Sabine; Giessen, Erik; Leeuwen, Yvonne

Stress-strain response of a cast 319-T6 aluminum under thermomechanical loading
pp. 139-151(13)
Authors: Sehitoglu, Huseyin; Smith, Tracy; Qing, Xinlin; Maier, Hans; Allison, J.

Mechanical properties of austenitic stainless steel single crystals: Influence of nitrogen and hydrogen content
pp. 153-161(9)
Authors: Sucre, Y.; Vogt, J.; Iost, A.; Najjar, D.; Chumlyakov, Y.

Correlation between former alpha boundary growth kinetics and superplastic flow in Zn-22 pct Al
pp. 163-172(10)
Authors: Yousefiani, Ahmadali; Mohamed, Farghalli

Design of quaternary Ir-Nb-Ni-Al refractory superalloys
pp. 173-178(6)
Authors: Yu, X.; Yamabe-Mitarai, Y.; Ro, Y.; Harada, H.

The identification of hydrogen trapping states in an Al-Li-Cu-Zr alloy using thermal desorption spectroscopy
pp. 179-193(15)
Authors: Smith, Stephen; Scully, John

Microstructural and compositional evolution of compound layers during gaseous nitrocarburizing
pp. 195-211(17)
Authors: Du, Hong; Somers, Marcel; Agren, John

Macroscopic and microscopic evolutions of a shot-peened layer during isothermal recovery
pp. 213-224(12)
Authors: Lillamand, I.; Barrallier, L.; Sprauel, J.; Chiron, R.

Prediction of cracks in continuously cast steel beam blank through fully coupled analysis of fluid flow, heat transfer, and deformation behavior of a solidifying shell
pp. 225-237(13)
Authors: Lee, Jung-Eui; Yeo, Tae-Jung; Hwan OH, Kyu; Yoon, Jong-Kyu; Yoon, U-Sok

A comparative study of the microstructures observed in statically cast and continuously cast Bi-In-Sn ternary eutectic alloy
pp. 239-248(10)
Authors: Sengupta, S.; Soda, H.; McLean, A.; Rutter, J.

Processing and microstructural characterization of Al-Cu alloys produced from rapidly solidified powders
pp. 249-260(12)
Authors: Conlon, K.; Maire, E.; Wilkinson, D.; Henein, H.

Creep expansion of porous Ti-6Al-4V sandwich structures
pp. 261-273(13)
Authors: Queheillalt, Douglas; Wadley, Haydn; Choi, Bill; Schwartz, Daniel

The effect of rolling on graphitization characteristics of strip cast Fe-C-Si white cast iron
pp. 275-281(7)
Authors: Song, J.; Lui, T.; Chen, L.; Kuo, B.

Mechanical enhancement of the carbothermic formation of TiB₂
pp. 283-289(7)
Author: Welham, N.

Thermal expansion behavior of silver matrix composites
pp. 291-298(8)
Authors: Chang, Shou-Yi; Lin, Su-Jien; Flemings, Merton

Characterization of Mo-SiO₂ functionally graded materials
pp. 299-308(10)
Authors: Ishibashi, H.; Tobimatsu, H.; Hayashi, K.; Matsumoto, T.; Tomsia, A.; Saiz, E.

The influence of reinforcement particle size distribution on the mechanical behavior of a stainless steel/tin composite
pp. 309-318(10)
Authors: Liu, X.; Hellman, J.; Pagounis, E.; Lindroos, V.

On the infiltration behavior of Al, Al-Li, and Mg meltas through SiC _p bed
pp. 319-325(7)
Authors: Murty, B.; Thakur, S.; Dhindaw, B.

Effect of increased growth velocity on the growth temperature of the Al-Al₂Cu eutectic
pp. 327-328(2)
Authors: Juarez-Hernandez, A.; Jones, H.