Metallurgical and Materials Transactions A

Effect of ordering energy and stoichiometry in Σ = 5 boundaries in B2 compounds
pp. 2655-2668(14)
Authors: Mutasa, B.; Farkas, D.

Characterization by thermoelectric power of a commercial aluminum-iron-silicon alloy (8011) during isothermal precipitation
pp. 2669-2677(9)
Author: Luiggi, Ney

Nanometer-scale, fully lamellar microstructure in an aged TiAl-based alloy
pp. 2679-2685(7)
Author: Sun, Y.

Grain growth and carbide precipitation in superalloy, UDIMET 520
pp. 2687-2695(9)
Authors: Xu, S.; Dickson, J.; Koul, A.

Transformation relaxation and aging in a CuZnAl shape-memory alloy studied by modulated differential scanning calorimetry
pp. 2697-2705(9)
Author: Wei, Z.

Surface segregation of phosphorus, carbon, and sulfur in commercial low-carbon grades of steel
pp. 2707-2715(9)
Authors: Rangarajan, V.; Toncheff, R.; Franks, L.

Interdiffusion in the carbides of the Nb-C system
pp. 2717-2726(10)
Authors: Woodford, J.; Chang, Y.

Some observations on cyclic deformation structures in the high-strength commercial aluminum alloy AA 7150
pp. 2727-2736(10)
Authors: Hanlon, D.; Rainforth, W.

Interface-controlled fatigue cracking of SCS-6/Ti-22Al-23Nb “orthorhombic” titanium aluminide composite
pp. 2737-2746(10)
Authors: Her, Y.; Wang, P.; Yang, J.

Sliding wear behavior of some Al-Si alloys: Role of shape and size of Si particles and test conditions
pp. 2747-2752(6)
Authors: Prasad, B.; Venkateswarlu, K.; Modi, O.; Jha, A.; Das, S.; Dasgupta, R.; Yegneswaran, A.

Effect of pitting corrosion in NaCl solutions on the statistics of fracture of beryllium
pp. 2753-2760(8)
Authors: Vaidya, Rajendra; Hill, Mary; Hawley, Marilyn; Butt, Darryl

Spatially resolved X-ray diffraction phase mapping and α → β → α transformation kinetics in the heat-affected zone of commercially pure titanium arc welds
pp. 2761-2773(13)
Authors: Elmer, John; Wong, Joe; Ressler, Thorsten

Charpy V-notch properties and microstructures of narrow gap ferritic welds of a quenched and tempered steel plate
pp. 2775-2784(10)
Authors: Powell, G.; Herfurth, G.

Solidification of Nb-bearing superalloys: Part I. Reaction sequences
pp. 2785-2796(12)
Authors: DuPont, J.; Notis, M.; Marder, A.; Robino, C.; Michael, J.

Solidification of Nb-bearing superalloys: Part II. Pseudoternary solidification surfaces
pp. 2797-2806(10)
Authors: DuPont, J.; Marder, A.; Notis, M.; Robino, C.

〈110〉 dendrite growth in aluminum feathery grains
pp. 2807-2817(11)
Authors: Henry, S.; Rappaz, M.; Jarry, P.

Reactive infiltration processing of aluminum-nickel intermetallic compounds
pp. 2819-2828(10)
Authors: Marchi, C.; Mortensen, A.

Numerical analysis of the formability of an aluminum 2024 alloy sheet and its laminates with steel sheets
pp. 2829-2834(6)
Authors: Takuda, Hirohiko; Hatta, Natsuo

Role of cold work and SiC reinforcements on the β′/β precipitation in Al-10 pct Mg alloy
pp. 2835-2842(8)
Authors: Bhargava, N.; Samajdar, I.; Ranganathan, S.; Surappa, M.

Effect of SiC volume fraction and particle size on the fatigue resistance of a 2080 Al/SiC _p composite
pp. 2843-2854(12)
Authors: Chawla, N.; Jones, J.; Andres, C.; Allison, J.

Damage mechanisms in a cast ductile iron and a Al₂O_3p /Al composite
pp. 2855-2862(8)
Authors: Zhu, J.; Liaw, P.; Corum, J.; Hansen, J.; Cornie, J.