Metallurgical and Materials Transactions A

Discontinuous cellular precipitation in a high-refractory nickel-base superalloy
pp. 2443-2452(10)
Authors: Nystrom, J.; Pollock, T.; Murphy, W.; Garg, A.

C-Ni and Al-C-Ni phase diagrams and thermodynamic properties of C in the alloys from 1550 °C to 2300 °C
pp. 2453-2458(6)
Authors: Oden, L.; Gokcen, N.

Texture development in dual-phase cold-rolled 18 pct Ni maraging steel
pp. 2459-2465(7)
Authors: Ahmad, Z.; Farooque, M.; Ul Haq, A.; Khan, A.

Building a continuous cooling transformation diagram of β-CEZ alloy by metallography and electrical resistivity measurements
pp. 2467-2475(9)
Authors: Angelier, C.; Bein, S.; Béchet, J.

Simulation of the precipitation of sigma phase in duplex stainless steels
pp. 2477-2484(8)
Authors: Cortie, M.; Jackson, E.

Interphase boundary precipitation in a Ti-1.7 at. pct Er alloy
pp. 2485-2497(13)
Authors: Kral, M.; Hofmeister, W.; Wittig, J.

A new model for the volume fraction of martensitic transformations
pp. 2499-2506(8)
Author: Yu, H.

Discontinuity in normal spectral emissivity of solid and liquid copper at the melting point
pp. 2507-2513(7)
Authors: Watanabe, H.; Susa, M.; Nagata, K.

Numerical simulation of the X-ray stress analysis technique in polycrystalline materials under elastic loading
pp. 2515-2525(11)
Authors: Chidambarrao, D.; Song, Y.; Noyan, I.

Effects of morphology and volume fraction of α ₂ phase on the fatigue crack propagation of a Ti-24Al-11Nb alloy
pp. 2527-2536(10)
Authors: Chung, Hyun; Lee, Chong; Kim, Nack

Experimental evaluation of a polycrystal deformation modeling scheme using neutron diffraction measurements
pp. 2537-2541(5)
Authors: Clausen, Bjørn; Lorentzen, Torben

The effect of processing on the hot workability of Ti-48Al-2Nb-2Cr alloys
pp. 2543-2553(11)
Author: Fuchs, G.

Ductile-phase toughening in V-V₃Si in situ composites
pp. 2555-2564(10)
Authors: Henshall, G.; Strum, M.; Bewlay, B.; Sutliff, J.

Neutron diffraction measurements of intergranular strains in MONEL-400
pp. 2565-2576(12)
Authors: Holden, T.; Clarke, A.; Holt, R.

A new miniature mechanical testing procedure: Application to intermetallics
pp. 2577-2582(6)
Authors: Isshiki, Kazuhiko; Horita, Zenji; Fujinami, Takayoshi; Sano, Takeshi; Nemoto, Minoru; Ma, Yan; Langdon, Terence

An investigation of the effects of interfacial microstructure on the fatigue behavior of a four-ply [75]₄ continuous silicon carbide (SCS-6) fiber-reinforced titanium matrix composite
pp. 2583-2593(11)
Authors: Jin, O.; Li, Y.; Rabeeh, B.; Soboyejo, W.

Correlation of microstructure and thermal fatigue property of three work rolls
pp. 2595-2608(14)
Authors: Lee, Sunghak; Kim, Do; Ryu, Jae; Shin, Keesam

An overview of the principles of modeling charpy impact energy data using statistical analyses
pp. 2609-2623(15)
Authors: Moskovic, R.; Flewitt, P.

The effect of consolidation temperature on microstructure and mechanical properties in powder metallurgy-processed 2XXX aluminum alloy composites reinforced with SiC particulates
pp. 2625-2636(12)
Authors: Shin, Keesam; Chung, Dongsup; Lee, Sunghak

Cyclic deformation behavior of a transformation-induced plasticity-aided dual-phase steel
pp. 2637-2644(8)
Authors: Sugimouto, Koh-Ichi; Kobayashi, Mitsuyuki; Yasuki, Shin-Ichi

Understanding the potential and pH dependency of high-strength β-titanium alloy environmental crack initiation
pp. 2645-2656(12)
Authors: Kolman, D.; Scully, J.

CO₂ laser beam welding of 6061-T6 aluminum alloy thin plate
pp. 2657-2662(6)
Authors: Hirose, Akio; Kobayashi, Kojiro; Todaka, Hirotaka

A microstructural study of dislocation substructures formed in metal foil substrates during ultrasonic wire bonding
pp. 2663-2671(9)
Authors: Murdeshwar, Nikhil; Krzanowski, James

Interfacial characteristics for brazing of aluminum matrix composites with Al-12Si filler metals
pp. 2673-2682(10)
Authors: Weng, W.; Chuang, T.

Effect of substrate grain size on iron-zinc reaction kinetics during hot-dip galvanizing
pp. 2683-2694(12)
Authors: Jordan, C.; Marder, A.

Effect of phosphorous surface segregation on iron-zinc reaction kinetics during hot-dip galvanizing
pp. 2695-2703(9)
Authors: Jordan, C.; Zuhr, R.; Marder, A.

Eutectic reaction and nonconstant material parameters in micro-macrosegregation modeling
pp. 2705-2714(10)
Authors: Combeau, Hervé; Mo, Asbjørn

Processing of AA3004 alloy can stock for optimum strength and formability
pp. 2715-2721(7)
Authors: Ding, Shixi; Morris, James

Direct consolidation of γ-TiAl-Mn-Mo from elemental powder mixtures and control of porosity through a basic study of powder reactions
pp. 2723-2729(7)
Authors: Lee, T.; Kim, J.; Hwang, S.

Role of cladding in the notched tensile properties of a titanium matrix composite
pp. 2731-2740(10)
Authors: Ramamurty, U.; Zok, F.; Leckie, F.

Phase-stress partition during uniaxial tensile loading of a TiC-particulate-reinforced Al composite
pp. 2741-2753(13)
Authors: Shi, N.; Bourke, M.; Roberts, J.; Allison, J.

Dislocations in continuous filament reinforced W/NiAl and Al₂O₃/NiAl composites
pp. 2755-2761(7)
Authors: Wang, L.; Xu, K.; Bowman, R.; Arsenault, R.

Discussion of “an analysis of static recrystallization during continuous, rapid heat treatment”
pp. 2763-2764(2)
Authors: Erukhimovitch, V.; Baram, J.

Authors' reply
pp. 2764-2765(2)
Authors: Semiatin, S.; Sukonnik, I.; Seetharaman, V.

Reduction and removal of martensite stabilization in Cu-Zn-Al-Mn-Zr shape memory alloys
pp. 2765-2767(3)
Authors: Lam, C.; Chung, C.; Lai, J.; Zou, W.

Analysis and prevention of cracking phenomena occurring during softfacing of brass on AISI 4140 steel substrate
pp. 2767-2773(7)
Authors: Kim, Dong-Kuk; Lee, Sunghak

Fracture behavior of squeeze-cast aluminum-nickel composites for diesel engine piston rings
pp. 2773-2780(8)
Authors: Lee, Sunghak; Choo, Seong-Hun; Rhee, Meungho

On the creep strengthening of SiC particulates in SiC-Al composites
pp. 2780-2782(3)
Author: Mohamed, Farghalli