Journal of Thermal Spray Technology

Editorial
pp. 1-2(2)
Authors: Marple, Basil; Agarwal, Arvind; Hyland, Margaret; Lau, Yuk-Chiu; Li, Chang-Jiu; Lima, Rogerio; Montavon, Ghislain

Improving Powder Injection in Plasma Spraying by Optical Diagnostics of the Plasma and Particle Characterization
pp. 3-11(9)
Authors: Mauer, Georg; Vaßen, Robert; Stöver, Detlev; Kirner, Stefan; Marqués, José-Luis; Zimmermann, Stephan; Forster, Günter; Schein, Jochen

Velocity Diagnostics for Gas Velocity Distributions in Cold Gas and Plasma Spraying Using Non-Resonant Laser Scattering
pp. 12-20(9)
Authors: Lange, Sebastian; Sieber, Marco; Forster, Günter; Marqués-López, José; Schein, Jochen; Kähler, Christian

Modeling of the Plasma Flow and Anode Region Inside a Direct Current Plasma Gun
pp. 21-27(7)
Authors: Bolot, Rodolphe; Coddet, Christian; Allimant, Alain; Billières, Dominique

Improvement of Plasma Spray Torch Stability by Controlling Pressure and Voltage Dynamic Coupling
pp. 28-38(11)
Authors: Rat, V.; Coudert, J.

Predicting the Thermal Conductivity of AlSi/Polyester Abradable Coatings: Effects of the Numerical Method
pp. 39-47(9)
Authors: Bolot, Rodolphe; Seichepine, Jean-Louis; Qiao, Jiang; Coddet, Christian

Effect of Substrate Temperature and Ambient Pressure on Heat Transfer at Interface Between Molten Droplet and Substrate Surface
pp. 48-58(11)
Authors: Fukumoto, M.; Yang, K.; Tanaka, K.; Usami, T.; Yasui, T.; Yamada, M.

Flattening and Cooling of Millimeter- and Micrometer-Sized Alumina Drops
pp. 59-67(9)
Authors: Goutier, S.; Vardelle, M.; Labbe, J.; Fauchais, P.

Influence of the Surface State on the Adherence of the Coating: Case of an Alumina Coating Plasma Sprayed on SiC Composites
pp. 68-75(8)
Authors: Costil, S.; Lukat, S.; Verdy, C.; Coddet, C.

Relationships Between Process Parameters, Microstructure, and Adhesion Strength of HVOF Sprayed IN718 Coatings
pp. 76-82(7)
Authors: Lyphout, Christophe; Nylén, Per; Östergren, Lars

Phase Composition and Microstructural Responses of Graded Mullite/YSZ Coatings Under Water Vapor Environments
pp. 83-91(9)
Authors: Garcia, E.; Mesquita-Guimarães, J.; Miranzo, P.; Osendi, M.; Cojocaru, C.; Wang, Y.; Moreau, C.; Lima, R.

Elastic Modulus Evolution and Behavior of Si/Mullite/BSAS-Based Environmental Barrier Coatings Exposed to High Temperature in Water Vapor Environment
pp. 92-99(8)
Authors: Cojocaru, C.; Kruger, S.; Moreau, C.; Lima, R.

Mechanical Behavior of Air Plasma-Sprayed YSZ Functionally Graded Mullite Coatings Investigated via Instrumented Indentation
pp. 100-107(8)
Authors: Cojocaru, C.; Wang, Y.; Moreau, C.; Lima, R.; Mesquita-Guimarães, J.; Garcia, E.; Miranzo, P.; Osendi, M.

Next Generation Thermal Barrier Coatings for the Gas Turbine Industry
pp. 108-115(8)
Authors: Curry, Nicholas; Markocsan, Nicolaie; Li, Xin-Hai; Tricoire, Aurélien; Dorfman, Mitch

Columnar-Structured Thermal Barrier Coatings (TBCs) by Thin Film Low-Pressure Plasma Spraying (LPPS-TF)
pp. 116-120(5)
Authors: Hospach, Andreas; Mauer, Georg; Vaßen, Robert; Stöver, Detlev

Effect of Chemical Compositions and Surface Morphologies of MCrAlY Coating on Its Isothermal Oxidation Behavior
pp. 121-131(11)
Authors: Li, Yong; Li, Chang-Jiu; Zhang, Qiang; Xing, Lu-Kuo; Yang, Guan-Jun

The Oxidation Behavior of TBC with Cold Spray CoNiCrAlY Bond Coat
pp. 132-138(7)
Authors: Chen, W.; Irissou, E.; Wu, X.; Legoux, J.-G.; Marple, B.

High Temperature Mechanical Behavior of UHTC Coatings for Thermal Protection of Re-Entry Vehicles
pp. 139-144(6)
Authors: Pulci, G.; Tului, M.; Tirillò, J.; Marra, F.; Lionetti, S.; Valente, T.

Preparation of Nanocomposite GDC/LSCF Cathode Material for IT-SOFC by Induction Plasma Spraying
pp. 145-153(9)
Authors: Shen, Yan; Almeida, Veronica; Gitzhofer, François

The Structure and Properties of Plasma Sprayed Iron Oxide Doped Manganese Cobalt Oxide Spinel Coatings for SOFC Metallic Interconnectors
pp. 154-159(6)
Authors: Puranen, Jouni; Lagerbom, Juha; Hyvärinen, Leo; Kylmälahti, Mikko; Himanen, Olli; Pihlatie, Mikko; Kiviaho, Jari; Vuoristo, Petri

Influence of Deposition Temperature on the Microstructures and Properties of Plasma-Sprayed Al₂O₃ Coatings
pp. 160-169(10)
Authors: Hao, Shun; Li, Chang-Jiu; Yang, Guan-Jun

Structural, Mechanical and Erosion Properties of Yttrium Oxide Coatings by Axial Suspension Plasma Spraying for Electronics Applications
pp. 170-185(16)
Authors: Kitamura, Junya; Tang, Zhaolin; Mizuno, Hiroaki; Sato, Kazuto; Burgess, Alan

Design of Experiment Analysis of the Sulzer Metco DJ High Velocity Oxy-Fuel Coating of Hydroxyapatite for Orthopedic Applications
pp. 186-194(9)
Authors: Hasan, S.; Stokes, J.

Comparative Study of the Electrical Properties and Characteristics of Thermally Sprayed Alumina and Spinel Coatings
pp. 195-204(10)
Authors: Toma, Filofteia-Laura; Scheitz, Stefan; Berger, Lutz-Michael; Sauchuk, Viktar; Kusnezoff, Mihails; Thiele, Sven

Influence of NH₄Cl Powder Addition for Fabrication of Aluminum Nitride Coating in Reactive Atmospheric Plasma Spray Process
pp. 205-212(8)
Authors: Shahien, Mohammed; Yamada, Motohiro; Yasui, Toshiaki; Fukumoto, Masahiro

Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings
pp. 213-226(14)
Authors: Wong, Wilson; Irissou, Eric; Ryabinin, Anatoly; Legoux, Jean-Gabriel; Yue, Stephen

Characterization of High-Temperature Abrasive Wear of Cold-Sprayed FeAl Intermetallic Compound Coating
pp. 227-233(7)
Authors: Li, Chang-Jiu; Wang, Hong-Tao; Yang, Guan-Jun; Bao, Chong-Gao

Influence of Impact Angle and Gas Temperature on Mechanical Properties of Titanium Cold Spray Deposits
pp. 234-242(9)
Authors: Binder, K.; Gottschalk, J.; Kollenda, M.; Gärtner, F.; Klassen, T.

Influence of Pre-Heated Al 6061 Substrate Temperature on the Residual Stresses of Multipass Al Coatings Deposited by Cold Spray
pp. 243-251(9)
Authors: Rech, Silvano; Trentin, Andrea; Vezzù, Simone; Legoux, Jean-Gabriel; Irissou, Eric; Guagliano, Mario

Investigation of Impact Behavior of Cold-Sprayed Large Annealed Copper Particles and Characterization of Coatings
pp. 252-259(8)
Authors: Li, Wenya; Guo, Xueping; Yu, Min; Liao, Hanlin; Coddet, Christian

Corrosion Behavior of Cold Sprayed Titanium Coatings and Free Standing Deposits
pp. 260-274(15)
Authors: Hussain, T.; McCartney, D.; Shipway, P.; Marrocco, T.

Consolidation of Al₂O₃/Al Nanocomposite Powder by Cold Spray
pp. 275-284(10)
Authors: Poirier, Dominique; Legoux, Jean-Gabriel; Drew, Robin; Gauvin, Raynald

Effect of Ceramic Particle Velocity on Cold Spray Deposition of Metal-Ceramic Coatings
pp. 285-291(7)
Authors: Sova, A.; Kosarev, V.; Papyrin, A.; Smurov, I.

Formation of Cold-Sprayed Ceramic Titanium Dioxide Layers on Metal Surfaces
pp. 292-298(7)
Authors: Kliemann, J.-O.; Gutzmann, H.; Gärtner, F.; Hübner, H.; Borchers, C.; Klassen, T.

Metallization of Thin Al₂O₃ Layers in Power Electronics Using Cold Gas Spraying
pp. 299-306(8)
Authors: Donner, Kerstin-Raffaela; Gaertner, Frank; Klassen, Thomas

Effect of Using Liquid Feedstock in a High Pressure Cold Spray Nozzle
pp. 307-316(10)
Authors: Farvardin, E.; Stier, O.; Lüthen, V.; Dolatabadi, A.

Analysis of the Mechanical Properties of an Arc Sprayed WC-FeCSiMn Coating: Compression, Bending, and Tension Behavior
pp. 317-327(11)
Authors: Tillmann, W.; Nebel, J.

Analysis of the Mechanical Properties of an Arc-Sprayed WC-FeCSiMn Coating: Nanoindentation and Simulation
pp. 328-335(8)
Authors: Tillmann, W.; Klusemann, B.; Nebel, J.; Svendsen, B.

Microstructures of Metallic NiCrBSi Coatings Manufactured via Hybrid Plasma Spray and In Situ Laser Remelting Process
pp. 336-343(8)
Authors: Serres, Nicolas; Hlawka, Françoise; Costil, Sophie; Langlade, Cécile; Machi, Frédérique

Microstructure and Electrochemical Behavior of Fe-Based Amorphous Metallic Coatings Fabricated by Atmospheric Plasma Spraying
pp. 344-350(7)
Authors: Zhou, Z.; Wang, L.; He, D.; Wang, F.; Liu, Y.

Characteristics of Cu Film Deposited Using VLPPS
pp. 351-357(7)
Authors: Zhang, N.; Sun, F.; Zhu, L.; Verdy, C.; Planche, M.; Liao, H.; Dong, C.; Coddet, C.

Thermophysical and Microstructural Studies on Thermally Sprayed Tungsten Carbide-Cobalt Coatings
pp. 358-365(8)
Authors: Thiele, Sven; Sempf, Kerstin; Jaenicke-Roessler, Klaus; Berger, Lutz-Michael; Spatzier, Jörg

Structure and Tribological Characteristics of HVOF Coatings Sprayed from Powder Blends of Cr₃C₂-25NiCr and NiCrBSi Alloy
pp. 366-371(6)
Authors: Määttä, A.; Kanerva, U.; Vuoristo, P.

Improved Hardfacing for Drill Bits and Drilling Tools
pp. 372-377(6)
Authors: Sue, Albert; Sreshta, Harry; Qiu, Bao