Journal of Materials Science Letters

Protein induced morphosynthesis of calcium carbonate
pp. 167-170(4)
Authors: Nayar S.; Sinha A.

Impurity diffusion of Mo in Zr₅₇Nb₅Cu_15.4Ni_12.6Al₁₀ bulk metallic glass
pp. 171-173(3)
Authors: Wang X.Y.; Sun L.L.; Li G.; Liu R.P.; Zhang J.; Wang W.K.

In situ observation of multiple fractures of alumina-silica short fibers in an aluminum matrix composite
pp. 175-177(3)
Authors: Ma A.; Fang F.; Jiang J.; Jiang J.; Nishida Y.; Saito N.; Shigematsu I.

Microhardness studies on organic crystals
pp. 179-180(2)
Authors: Stephens J.; Gebre T.; Batra A.K.; Aggarwal M.D.; Lal R.B.

Porous anti-reflective silica coatings with a high spectral coverage by sol-gel spin coating technique
pp. 181-183(3)
Authors: Biswas P.K.; Devi P.S.; Chakraborty P.K.; Chatterjee A.; Ganguli D.; Kamath M.P.; Joshi A.S.

Role of CuO for the decarbonation of BaCO₃ and CaCO₃ in the solid-state reaction of CuO with BaCO₃ and that of CuO with CaCO₃
pp. 185-189(5)
Author: Itoh T.

Toughness and hardness of hot-pressed TiB₂–TaB₂ and Ti(C,N)–ZrO₂–TiB₂ composites at elevated temperature
pp. 191-193(3)
Author: Tai W-P.

Re-coarsening of the refined crystals in the undercooled Cu-30at.% Ni alloy
pp. 195-197(3)
Authors: Li J.F.; Cao Q.P.; Yan Z.J.; He S.R.; Zhou Y.H.

Simple preparation of AZ91 magnesium alloy slurries for rheoforming
pp. 199-200(2)
Authors: Kwon S-I.; Kim S-J.; Byun J-Y.; Ha H-P.; Shim J-D.

Study of the influence of thermal shock on interfacial damage in thermosetting matrix aramid fiber composites
pp. 201-202(2)
Author: Ray B.C.

Effect of thermal shock on modulus of thermally and cryogenically conditioned Kevlar/polyester composites
pp. 203-204(2)
Authors: Ray B.C.; Hasan S.T.; Clegg D.W.

Synthesis and characterization of Cd_yZn_{1 - y}S nanoparticles in salt-induced block copolymer micelles
pp. 205-207(3)
Authors: Zhao H.; Jia W.; Douglas E.P.

Microwave characteristics of CuO-doped Ba(Ni_1/3Nb_2/3)O₃ dielectric resonators
pp. 209-212(4)
Authors: Hsu C-S.; Huang C-L.; Ha L-S.

New route for preparation of SiC-B₄C/C composite with excellent oxidation resistance up to 1400°C
pp. 213-215(3)
Authors: Fan Z.; Wei T.; Shi J.; Zai G.; Song J.; Liu L.; Li J.; Chen J.

Structural and dielectric properties of Ba₃R₃Ti₅Nb₅O₃₀ (R = Pr or Ce) system
pp. 217-219(3)
Authors: Rao P.P.; Ghosh S.K.; Koshy P.; Warrier K.G.K.

Electrochemical lithium intercalation in CoSb₃ compound
pp. 221-224(4)
Authors: Xie J.; Zhao X.; Cao G.; Zhong Y.; Zhao M.

Effects of oxygen pressure on the c-axis oriented growth of LiNbO₃ thin film on SiO₂/Si substrate by pulsed laser deposition
pp. 225-227(3)
Authors: Wang X.; He J.; Huang J.; Zhao B.; Ye Z.

Fracture behavior around a crack tip in rubber-modified epoxy adhesive joint with various bond thicknesses
pp. 229-233(5)
Authors: Lee D-B.; Ikeda T.; Miyazaki N.; Choi N-S.

Influence of Fe₂O₃-filler on the thermal properties of polystyrene
pp. 235-237(3)
Authors: Kuljanin J.; MarinoviCincovi M.; Zec S.; omor M.I.; Nedeljkovi J.M.

Effects of Cl^- ion concentration and pH on the corrosion properties of NiTi alloy in NaCl solution
pp. 239-240(2)
Authors: Cheng Y.; Cai W.; Zhao L.C.

Unconventional deformation modes and surface roughness evolution in Al single crystals under restricted cyclic tension conditions
pp. 241-245(5)
Authors: Gordienko Y.G.; Zasimchuk E.E.; Gontareva R.G.