Journal of Materials Science Letters

Densification of polystyrene under ultraviolet irradiation
pp. 2089-2090(2)
Authors: Arvidsson A.; White J.R.

Fabrication of zeolite coatings on stainless steel grids
pp. 2091-2094(4)
Authors: Wang Y.; Tang Y.; Wang X.; Shan W.; Ke C.; Gao Z.; Hu J.; Yang W.

The determination of porosity and cellulose content of plant fibers by density methods
pp. 2095-2096(2)
Authors: Mwaikambo L.Y.; Ansell M.P.

Effect of reinforcing-particle size on the formation of microbands in SiC_P/6151Al metal matrix composites
pp. 2097-2098(2)
Authors: Liu L.F.; Dai L.H.; Yang G.W.

In situ synthesis of nanosized cadmium sulfide using bovine serum albumin
pp. 2099-2100(2)
Authors: Nayar S.; Sinha A.; Das S.; Das S.K.; Rao P.R.

Evaluation in “transparency” of glass particle-dispersed optical composites by pico-second order pulse profile
pp. 2101-2104(4)
Authors: Matsumura K.; Kagawa Y.

Dielectric enhancement in polycrystalline BaTiO_3/Ba_0.6Sr_0.4TiO_3 multilayered thin films on Pt/Ti/SiO_2/Si substrates
pp. 2105-2107(3)
Authors: Ge S.; Shen M.; Ning Z.; Cao W.

Observation of mesh-like pattern in the immiscible Fe-Cu multilayers upon rapid thermal annealing
pp. 2109-2112(4)
Authors: Yang G.W.; Liu B.X.

Porous glass-ceramic with skeleton of -NbPO_5 with three-dimensional network structure
pp. 2113-2117(5)
Authors: Mazali I.O.; Alves O.L.

Transparent YAG from powder prepared by homogeneous precipitation reaction—Al(NO_3)_3+Y(NO_3)_3+(NH_4)_2SO_4+CO(NH_2)_2
pp. 2119-2121(3)
Authors: Ramanathan S.; Roy S.K.; Bhat Y.J.

The enhancement of trivalent ion conductivity in NASICON type solid electrolytes
pp. 2123-2125(3)
Authors: Tamura S.; Imanaka N.; Adachi G.

Fiber/matrix interface shear strength estimated from fiber pullout length data for Tyranno® Si-Zr-C-O fiber composites with different SiC-based matrices and interfaces
pp. 2127-2130(4)
Authors: Davies I.J.; Ogasawara T.; Ishikawa T.

Preparation of transparent super-hydrophobic polymer film with brightness enhancement property
pp. 2131-2133(3)
Authors: Takeda K.; Sasaki M.; Kieda N.; Katayama K.; Kako T.; Hashimoto K.; Watanabe T.; Nakajima A.

X-ray diffraction shows a 0.5 nm spacing in hydrogels of poly(2-hydroxyethyl methacrylate) (pHEMA)
pp. 2135-2136(2)
Authors: Davison J.C.; Meakin J.R.; Skakle J.M.S.; Hukins D.W.L.

Spectrum response of the vacuum-deposited SiO_2/TiO_2 multilayer film with improved photo-catalytic activity
pp. 2137-2140(4)
Authors: Miyashita K.; Kuroda S.; Sumita T.; Ubukata T.; Kubota H.

Phase development of Y_2O_3-doped reaction-bonded mullite ceramics
pp. 2141-2143(3)
Authors: She J.H.; Ohji T.; Mechnich P.; Schmücker M.; Schneider H.

Sub-surface flaws in liquid phase sintered Si_3N_4 after different surface treatments
pp. 2145-2148(4)
Authors: Lee S-H.; Rixecker G.; Aldinger F.; Choi S-C.; Auh K-H.

Micromechanism of local brittle zone phenomenon in weld heat-affected zones of advanced 9% Ni steel
pp. 2149-2152(4)
Authors: Jang J-I.; Ju J-B.; Lee B-W.; Kwon D.; Kim W-S.

Micrometer-sized microporous silica spheres templated by a double-hydrophilic block copolymer
pp. 2153-2156(4)
Author: Qi L.

Preparation and mechanical properties of carbon fiber reinforced-TiC matrix composites
pp. 2157-2160(4)
Authors: Song G-M.; Guo Y-K.; Zhou Y.; Li Q.

The effect of lignin on the moisture-dependent behavior of spruce wood in axial compression
pp. 2161-2162(2)
Author: Gindl W.

New approach to improve the laser welding process of aluminum by using an external electrical current
pp. 2163-2165(3)
Authors: Xiao R.S.; Ambrosy G.; Zuo T.C.; Hügel H.

Interfacial fracture property determination of coated systems: A finite element study
pp. 2167-2171(5)
Authors: Li H.Q.; Cai X.; Cheng Q.L.