Journal of Materials Science

Fabrication of ceramic components with hierarchical porosity
pp. 5425-5455(31)
Authors: Colombo, Paolo; Vakifahmetoglu, Cekdar; Costacurta, Stefano

Luminescence property of Ca₃(VO₄)₂:Eu³⁺ dependence on molar ratio of Ca/V and solution combustion synthesis temperature
pp. 5456-5462(7)
Authors: Qiu, Kehui; Li, Junfu; Li, Junfeng; Lu, Xueguang; Gong, Yingchun; Li, Junhan

First principles computational study of wurtzite CdTe nanowires
pp. 5463-5467(5)
Authors: Sadowski, T.; Ramprasad, R.

Temperature-dependent barrier height in CdSe Schottky diode
pp. 5468-5471(4)
Author: Tripathi, S.

Evaluation of corrosion resistance of diamond-like carbon films deposited onto AISI 4340 steel
pp. 5472-5477(6)
Authors: Nery, R.; Bonelli, R.; Camargo, S.

Polycrystalline fluorine-doped tin oxide as sensoring thin film in EGFET pH sensor
pp. 5478-5481(4)
Authors: Batista, Pablo; Mulato, Marcelo

Effect of strain rate on quasistatic tensile flow behaviour of solution annealed 304 austenitic stainless steel at room temperature
pp. 5482-5489(8)
Authors: Kundu, Amrita; Chakraborti, Pravash

Microstructure and martensitic transformation behavior of a constant-strain aged Ni-Mn-Ga-Ti magnetic shape memory alloy
pp. 5490-5494(5)
Authors: Dong, G.; Gao, Z.; Tan, C.; Cai, W.; Sui, J.

Stress relaxation behavior of nano-hydroxyapatite reinforced poly(vinyl alcohol) gel composites as biomaterial
pp. 5495-5501(7)
Authors: Pan, Yusong; Xiong, Dangsheng

Degradation of 5 mol% yttria-zirconia by intergranular cracking in water at 300 °C
pp. 5502-5511(10)
Authors: Vandermeulen, W.; Bosch, R.-W.; Leenaers, A.; Renterghem, W.; Snijkers, F.

Mechanical properties of friction welded 6063 aluminum alloy and austenitic stainless steel
pp. 5512-5521(10)
Authors: Sammaiah, P.; Suresh, Arjula; Tagore, G.

Analysis of Garofalo equation parameters for an ultrahigh carbon steel
pp. 5522-5527(6)
Authors: Castellanos, Jesús; Rieiro, Ignacio; Carsí, Manuel; Ruano, Oscar

Influence of fabrication parameters on crystallization, microstructure, and surface composition of NbN thin films deposited by rf magnetron sputtering
pp. 5528-5533(6)
Authors: Alfonso, J.; Buitrago, J.; Torres, J.; Marco, J.; Santos, B.

Wet hydrogen sulfide cracking of steel monitoring by acoustic emission: discrimination of AE sources
pp. 5534-5542(9)
Authors: Smanio, Véronique; Fregonese, Marion; Kittel, Jean; Cassagne, Thierry; Ropital, François; Normand, Bernard

Glass forming ability of Fe-Co-Zr-Nd-B alloys and bulk permanent magnets derived from amorphous precursor
pp. 5543-5546(4)
Authors: Tan, X.; Xu, H.; Wu, S.

Stability of the nitrogen-deficient Ti₂AlN _x MAX phase in Ar²⁺-irradiated (Ti,Al)N/Ti₂AlN _x multilayers
pp. 5547-5552(6)
Authors: Bugnet, M.; Cabioc'h, T.; Mauchamp, V.; Guérin, Ph.; Marteau, M.; Jaouen, M.

Effects of V and Nb on static recrystallisation of austenite and precipitate size in microalloyed steels
pp. 5553-5557(5)
Authors: Medina, S.; Gómez, M.; Gómez, P.

Inhibition of mild steel corrosion in HCl using pineapple leaves (Ananas comosus L.) extract
pp. 5558-5566(9)
Authors: Ekanem, U.; Umoren, S.; Udousoro, I.; Udoh, A.

Hierarchical mesoporous silica prepared from ethyl-cyanoethyl cellulose cholesteric liquid crystalline phase
pp. 5567-5573(7)
Authors: Wang, Wen; Liu, Ruigang; Liu, Weili; Tan, Junjun; Liu, Wenyong; Kang, Hongliang; Huang, Yong

Mechanism of zinc oxide-aluminum aluminothermic reaction
pp. 5574-5580(7)
Authors: Maleki, Ali; Panjepour, Masoud; Niroumand, Behzad; Meratian, Mahmood

Safety evaluation of composites with a wrinkled fabric preform under bending
pp. 5581-5590(10)
Authors: Do, Thanh; Lee, Dong-Joo

Photochemical modification of single-walled carbon nanotubes using HPHMP photoinitiator for enhanced organic solvent dispersion
pp. 5591-5597(7)
Authors: Ahmad, Mirza; Nadeem, Maria; Ma, Yuhong; Yang, Wantai

Nanoparticulate magnetite thin films as electrode materials for the fabrication of electrochemical capacitors
pp. 5598-5604(7)
Authors: Pang, Suh; Khoh, Wai; Chin, Suk

Polysaccharide-based nanoparticles formation by polyeletrolyte complexation of carboxymethylated cashew gum and chitosan
pp. 5605-5610(6)
Authors: Silva, D.; Maciel, J.; Feitosa, J.; Paula, H.; Paula, R.

The compression-after-impact strength of woven and non-crimp fabric reinforced composites subjected to long-term water immersion ageing
pp. 5611-5623(13)
Authors: Berketis, K.; Tzetzis, D.

Effect of annealing on precipitation, microstructural stability, and mechanical properties of cryorolled Al 6063 alloy
pp. 5624-5636(13)
Authors: Panigrahi, Sushanta; Jayaganthan, R.

Study on crystallization behavior and microstructure of melt-spun Nd₂(Fe,Nb)₁₄B/α-Fe alloys
pp. 5637-5641(5)
Authors: Wang, C.; Lan, M.; Yan, M.

Evaluation of oxidation resistance of thin continuous silicon oxycarbide fiber derived from silicone resin with low carbon content
pp. 5642-5648(7)
Authors: Narisawa, Masaki; Sumimoto, Ryu'ichi; Kita, Ken'ichiro

Quantitative evaluation of high temperature deformation mechanisms: a specific microgrid extensometry technique coupled with EBSD analysis
pp. 5649-5659(11)
Authors: Soula, A.; Locq, D.; Boivin, D.; Renollet, Y.; Caron, P.; Bréchet, Y.

Meso-macroporous monolithic CuO-CeO₂/γ-Al₂O₃ catalysts and their catalytic performance for preferential oxidation of CO
pp. 5660-5668(9)
Authors: Gu, Chunlei; Miao, Jie; Liu, Yuan; Wang, Yaquan

Phase transformation and precipitation hardening behavior of Cr and Fe in BS40CrFeSn alloy
pp. 5669-5675(7)
Authors: Li, Shufeng; Imai, Hisashi; Atsumi, Haruhiko; Kondoh, Katsuyoshi

Kinetics of isothermal reactive diffusion between solid Fe and liquid Al
pp. 5676-5684(9)
Authors: Tanaka, Y.; Kajihara, M.

Template-free hydrothermal synthesis of hollow hematite microspheres
pp. 5685-5691(7)
Authors: Dong, Qiang; Kumada, Nobuhiro; Yonesaki, Yoshinori; Takei, Takahiro; Kinomura, Nobukazu; Wang, Dan

Synthesis of zeolites NaA and analcime using rice husk ash as silica source without using organic template
pp. 5692-5697(6)
Authors: Azizi, Seyed; Yousefpour, Maryam

Photocatalyst TiO₂-Co: the effect of doping depth profile on methylene blue degradation
pp. 5698-5703(6)
Authors: Carvalho, Hudson; Batista, Ana; Bertholdo, Roberto; Santilli, Celso; Pulcinelli, Sandra; Ramalho, Teodorico

Photoluminescence and photoreactivity affected by oxygen defects in crystal-oriented rutile thin film fabricated by molecular precursor method
pp. 5704-5710(7)
Authors: Nagai, Hiroki; Aoyama, Sohei; Hara, Hiroki; Mochizuki, Chihiro; Takano, Ichiro; Honda, Tohru; Sato, Mitsunobu