Journal of Materials Science

Studies progress of preparation, properties and applications of hyper-cross-linked polystyrene networks
pp. 7621-7629(9)
Authors: Zhang, Xin; Shen, Shaohua; Fan, Liyuan

Effect of friction factor on barrelling in elliptical shaped billets during cold upset forging
pp. 7630-7637(8)
Authors: Baskaran, K.; Narayanasamy, R.; Arunachalam, S.

A new method for preparing hydrophobic nano-copper powders
pp. 7638-7642(5)
Authors: Jian-guang, Yang; Yuang-lin, Zhou; Okamoto, Takeshi; Ichino, Ryoichi; Okido, Masazumi

In-situ elevated-temperature TEM study of (AgSbTe₂)₁₅(GeTe)₈₅
pp. 7643-7646(4)
Authors: Cook, Bruce; Wei, Xuezheng; Harringa, Joel; Kramer, Matthew

Laser melting functionally graded composition of Waspaloy^® and Zirconia powders
pp. 7647-7656(10)
Authors: Mumtaz, Kamran; Hopkinson, Neil

Cracking in the stir zones of Mg-alloy friction stir spot welds
pp. 7657-7666(10)
Authors: Yamamoto, Motomichi; Gerlich, Adrian; North, Thomas; Shinozaki, Kenji

Hydrogen adsorption studies in micro-size cobalt dots
pp. 7667-7672(6)
Authors: Romero, Christian; Avila, Jonathan; Cisternas, Edgardo; Cabrera, Guerau; Cabrera, Alejandro; Temst, Kristiaan; Bael, Margriet

Misorientation behavior of an aluminum bicrystal with 15.7° symmetric tilt boundary using simple shear
pp. 7673-7677(5)
Authors: Kuo, Jui-Chao; Chen, Delphic; Tung, Shih-Heng; Shih, Ming-Hsiang

Photochemical behaviors during the photosensitization of colloidal TiO₂ particles by a newly synthesized multidentate squaraine
pp. 7678-7683(6)
Authors: Wang, Mingzhe; Xie, Hong; Zhu, Jianqiang; Xie, Minggui; Li, Tiankai; Li, Ying

Synthesis of a lightweight Ti-10Al-5Mg (wt.%) alloy by mechanical alloying followed by compaction and sintering
pp. 7684-7689(6)
Authors: Caetano, M.; Trindade, B.

Kinematical studies on rotation-based semi-auxetics
pp. 7690-7695(6)
Author: Lim, Teik-Cheng

Synthesis and electrochemical characterization of LiCo_1/3Ni_1/3Mn_1/3O₂ by radiated polymer gel method
pp. 7696-7701(6)
Authors: Wen, J.; Liu, H.; Wu, H.; Chen, C.

Experimental and numerical investigation on ductile-brittle fracture transition in a magnesium alloy
pp. 7702-7707(6)
Authors: Yan, C.; Ma, W.; Burg, V.; Chen, M.

Evolution of elastic mechanical properties during pressureless sintering of powder-processed metals and ceramics
pp. 7708-7715(8)
Authors: Bruck, Hugh; Shabana, Yasser; Xu, Buli; Laskis, JonPaul

Formation of a nanocrystalline surface layer on steels by air blast shot peening
pp. 7716-7720(5)
Authors: Liu, J.; Umemoto, M.; Todaka, Y.; Tsuchiya, K.

Silicide-carbide composites obtained from alloyed melt infiltration
pp. 7721-7728(8)
Authors: Esfehanian, Mohammad; Heinrich, Juergen; Horvath, Juergen; Koch, Dietmar; Grathwohl, Georg

Numerical simulation of rapid solidification of a spherical sample on a metallic substrate
pp. 7729-7737(9)
Authors: Nikolic, Zoran; Yoshimura, Masahiro

Preparation and characterization of ionic liquid intercalation compounds into layered zirconium phosphates
pp. 7738-7744(7)
Authors: Wang, Haiyan; Zou, Mingjian; Li, Na; Li, Kean

Comparative study of electrical and mechanical properties of fire-refined and electrolytically refined cold-drawn copper wires
pp. 7745-7749(5)
Authors: Martínez, Mònica; Fernández, Ana; Segarra, Mercè; Xuriguera, Helena; Espiell, Ferran; Ferrer, Núria

The coating of cadmium compounds with nickel compounds
pp. 7750-7756(7)
Authors: Haq, Ikram; Akhtar, Khalida

Fabrication and characterization of Ge nanocrystalline growth by ion implantation in SiO₂ matrix
pp. 7757-7761(5)
Authors: Mestanza, S.; Doi, I.; Swart, J.; Frateschi, N.

Influence of solution chemistry and surface condition on the critical inhibitor concentration for solutions typical of hot potassium carbonate CO₂ removal plant
pp. 7762-7771(10)
Authors: Harjac, S.; Atrens, A.; Moss, C.; Linton, V.

High electrical conductivity and high corrosion resistance fibers with high modulus and high strength prepared by electroless plating of gold on the surface of poly (p-phenylene benzobisoxazole) (PBO)
pp. 7772-7779(8)
Authors: Ishikawa, Hisako; Chen, Qingyun; Bin, Yuezhen; Komatsu, Kaori; Matsuo, Masaru

Effect of very high temperature short exposures on the dissolution of the γ′ phase in single crystal MC2 superalloy
pp. 7780-7786(7)
Authors: Cormier, Jonathan; Milhet, Xavier; Mendez, Jose

Effect of liquid phase on densification in electric-discharge compaction
pp. 7787-7793(7)
Authors: Wu, Xiyong; Guo, Jingdong

Welding of Al-359/20%SiC_p metal matrix composites by the novel MIG process with indirect electric arc (IEA)
pp. 7794-7800(7)
Authors: García, Rafael; López, Victor; Kennedy, Andrew; Arias, Gabriel

Effect of natural ageing on the mechanical properties of molybdenum polycrystals
pp. 7801-7805(5)
Authors: Bashir, F.; Butt, M.

Structural unit and faceting description of Σ3 asymmetric tilt grain boundaries
pp. 7806-7811(6)
Authors: Tschopp, Mark; McDowell, David

Microstructure and infiltration kinetics of Si₃N₄/Al-Mg composites fabricated by pressureless infiltration
pp. 7812-7818(7)
Authors: Wang, Shou-ren; Wang, Ying-zi; Wang, Yong; Geng, Hao-ran; Chi, Qing

Internal friction of Niobium-Titanium-Oxygen alloys
pp. 7819-7826(8)
Authors: Yu, L.; Yin, F.

Structural and electric properties of (Na_0.5Bi_0.5)_0.88Ba_0.12TiO₃
pp. 7827-7831(5)
Authors: Suchanicz, J.; Kusz, J.; Böhm, H.; Stopa, G.

Power generation of the touching Cu/Bi-Te/Cu composites under the periodically alternating temperature gradients
pp. 7832-7842(11)
Authors: Yamashita, Osamu; Odahara, Hirotaka; Ochi, Takahiro

Characterization of macroporous carbonate-substituted hydroxyapatite bodies prepared in different phosphate solutions
pp. 7843-7849(7)
Authors: Lee, Yoong; Hahm, Yeong; Matsuya, Shigeki; Nakagawa, Masaharu; Ishikawa, Kunio

Sensitivity of damage to microstructure evolution occurring during long-term high-temperature annealing in a semi-crystalline polymer
pp. 7850-7860(11)
Authors: Castagnet, Sylvie; Girard, David

Effect of carbon black concentration on electrical conductivity of epoxy resin-carbon black-silica nanocomposites
pp. 7861-7865(5)
Authors: Zhang, Wei; Blackburn, Richard; Dehghani-Sanij, Abbas

Optical switching of a photochromic bis-phenylazo compound in PMMA films
pp. 7866-7871(6)
Authors: Larciprete, Maria; Dini, Danilo; Ostuni, Raffaella; Sibilia, Concita; Bertolotti, Mario; Alvarez-Mico, Xavier; Gomez-Bombarelli, Rafael; Cappeddu, Mirko; Scalora, Michael; Bloemer, Mark

Experimental evaluation of the double torsion analysis on soda-lime glass
pp. 7872-7881(10)
Authors: Madjoubi, M.; Hamidouche, M.; Bouaouadja, N.; Chevalier, J.; Fantozzi, G.

Influence of melt treatments on sliding wear behavior of Al-7Si and Al-7Si-2.5Cu cast alloys
pp. 7882-7893(12)
Authors: Basavakumar, K.; Mukunda, P.; Chakraborty, M.

A novel approach to produce Al-alloy foams
pp. 7894-7898(5)
Authors: Fang, X.; Fan, Z.

Fatigue, retention and switching properties of PLZT(x/30/70) thin films with various La concentrations
pp. 7899-7905(7)
Authors: Kang, Seong; Joung, Yang

Structure and properties of diffusion bonded transition joints between commercially pure titanium and type 304 stainless steel using a nickel interlayer
pp. 7906-7912(7)
Authors: Kundu, Sukumar; Chatterjee, Subrata

Thermoplastic behavior of wood powder compacted materials
pp. 7913-7919(7)
Authors: Miki, Tsunehisa; Sugimoto, Hiroyuki; Kanayama, Kozo

Correlation between fracture toughness and microstructure of seeded silicon nitride ceramics
pp. 7920-7926(7)
Authors: Bučevac, D.; Bošković, S.; Matović, B.; Živković, Lj.; Vlajić, M.; Krstić, Vladimir

Characterization of spray deposited CoWO₄ thin films for photovoltaic electrochemical studies
pp. 7927-7933(7)
Authors: Pandey, P.; Bhave, N.; Kharat, R.

Optimization of the Al-Cr-Zn system at 460 °C
pp. 7934-7938(5)
Authors: Fourmentin, Richard; Avettand-Fènoël, Marie-Noëlle; Reumont, Guy; Perrot, Pierre

Synthesis of diamond from a chlorinated organic substance under hydrothermal conditions
pp. 7939-7949(11)
Authors: Korablov, Sergiy; Yokosawa, Kazunori; Sasaki, Taku; Korablov, Dmytro; Kawasaki, Akira; Ioku, Koji; Ishida, Emile; Yamasaki, Nakamichi

Disproportionation of Q _m (0 ≤ m ≤ 4) species in partially devitrified Li₂Si₂O₅ glasses with small amounts of P₂O₅
pp. 7950-7955(6)
Authors: Mortuza, M.; Ahsan, M.; Dupree, R.; Holland, D.

Welding of aluminium by the MIG process with indirect electric arc (MIG-IEA)
pp. 7956-7963(8)
Authors: García, R.; López, V.; Bedolla, E.

Role of metal additives in mechanochemical phase transformation of zirconia
pp. 7964-7971(8)
Authors: Karagedov, Garegin; Shatskaya, Svetlana; Lyakhov, Nikolai

Study on thermal behaviors of Li/H atom in the bulk graphite by molecular dynamics method
pp. 7972-7976(5)
Authors: Deng, Bin; Ding, Ke; Wu, Zhi-Wei; Shan, Li-Ying; Lim, P.; Gu, Chang-Xin

A model to explain extensive superplasticity in polycrystalline materials
pp. 7977-7980(4)
Authors: Dong, Yan; Li, Zhonghua; Sun, Jun

Mechanical properties and rheology of polyalkenoate cements using various low-cost fillers
pp. 7981-7981(1)
Authors: Acosta, Diego; Funkhouser, Gary; Grady, Brian