Journal of Materials Science

Impedance and modulus spectra of the percolation system silicon-polyester resin and their analysis using the two exponent phenomenological percolation equation
pp. 6477-6488(12)
Authors: Sauti, Godfrey; McLachlan, David

An alternative approach to in situ synthesize single crystalline ZnO nanowires by oxidizing granular zinc film
pp. 6489-6493(5)
Authors: Liu, Z.; Yeo, S.; Ong, C.

Tensile, impact and dielectric properties of three dimensional orthogonal aramid/glass fiber hybrid composites
pp. 6494-6500(7)
Authors: Yao, Lan; Li, Wenbin; Wang, Nan; Li, Wang; Guo, Xu; Qiu, Yiping

Crystallization behavior of poly(hydroxybytyrate-co-valerate) in model and bulk PHBV/kenaf fiber composites
pp. 6501-6509(9)
Authors: Buzarovska, Aleksandra; Bogoeva-Gaceva, Gordana; Grozdanov, A.; Avella, M.; Gentile, G.; Errico, M.

Rheological behavior of chitosan derivative/cellulose polyblends from N-methylmorpholine N-oxide/H₂O solution
pp. 6510-6514(5)
Authors: Liu, Xiaofei; Chen, Qiang; Pan, Huanming

C₆₀ end-functionalized four-armed polymers: synthesis and optical limiting properties
pp. 6515-6523(9)
Authors: Wu, Hui-Xia; Cao, Wei-Man; Cai, Rui-Fang; Song, Ying-Lin; Zhao, Li

Effect of glycerol cross-linking and hard segment content on the shape memory property of polyurethane block copolymer
pp. 6524-6531(8)
Authors: Chun, Byoung; Chong, Mi; Chung, Yong-Chan

On the structure and surface properties of NiO/MgO-La₂O₃ catalyst: Influence of the support composition and preparation method
pp. 6532-6540(9)
Authors: González-Cortés, Sergio; Aray, Ismael; Rodulfo-Baechler, Serbia; Lugo, Claudio; Castillo, Hector; Loaiza-Gil, Alfonso; Imbert, Freddy; Figueroa, Humberto; Pernía, Wilfredo; Rodríguez, Alfonso; Delgado, Oduber; Casanova, Rodrigo; Mendialdua, Juan; Rueda, Fulgencio

Flow through an evolving porous media—compressed foam
pp. 6541-6548(8)
Authors: Schulenburg, D.; Paterson-Beedle, M.; Macaskie, L.; Gladden, L.; Johns, M.

Composition dependence of thermally induced second-harmonic generation in chalcohalide glasses
pp. 6549-6554(6)
Authors: Guo, Haitao; Zheng, Xiaolin; Zhao, Xiujian; Gao, Guojun; Gong, Yueqiu; Gu, Shaoxuan

Theoretical study of the insulating oxides and nitrides: SiO₂, GeO₂, Al₂O₃, Si₃N₄, and Ge₃N₄
pp. 6555-6565(11)
Authors: Sevik, Cem; Bulutay, Ceyhun

Electrical conduction properties of Sr-doped Bi₄(SiO₄)₃ with the eulytite-type structure
pp. 6566-6571(6)
Authors: Kitamura, Naoto; Amezawa, Koji; Uchimoto, Yoshiharu; Tomii, Yoichi; Hanada, Teiichi

Microstructural and textural characterization of a hot-rolled IF steel
pp. 6572-6577(6)
Authors: Lins, Jefferson; Sandim, Hugo; Kestenbach, Hans-Jürgen

Superplastic behavior of an extruded eutectic NiAl/Cr(Mo) alloy at intermediate strain rate region
pp. 6578-6582(5)
Authors: Xinghao, Du; Baolin, Wu; Lee, C.; Huang, J.

Morphological control in solvothermal synthesis of titanium oxide
pp. 6583-6589(7)
Authors: Xie, Rong-Cai; Shang, Jian

Blending properties of poly(vinyl alcohol) and nylon 6-clay nanocomposite blends
pp. 6590-6599(10)
Authors: Yeh, Jen-Taut; Xu, Peng; Tsai, Fang-Chang

Hardness and structural correlation for electroless Ni alloy deposits
pp. 6600-6606(7)
Authors: Palaniappa, M.; Seshadri, S.

Prediction of residual stresses in welds of similar and dissimilar steel weldments
pp. 6607-6613(7)
Authors: Lee, Chin-Hyung; Chang, Kyong-Ho

Growth of boride layers on the 13% Cr steel surface in a mixture of amorphous boron and KBF₄
pp. 6614-6627(14)
Author: Dybkov, V.

Synthesis of MgTiO₃ by solid state reaction and characteristics with addition
pp. 6628-6632(5)
Authors: Zhou, Xiaohua; Yuan, Ying; Xiang, Longcheng; Huang, Yong

Hydrogen in Zircaloy-4: effects of the neutron irradiation on the hydride formation
pp. 6633-6637(5)
Authors: Vizcaíno, Pablo; Banchik, Abraham; Abriata, José

Improvement of fatigue strength by using cavitating jets in air and water
pp. 6638-6641(4)
Author: Soyama, H.

Impact response of composites after long-term water immersion
pp. 6642-6650(9)
Authors: Berketis, Kyriakos; Hogg, P.

Effect of laser beam welding on fracture toughness of a Ti-6.5Al-2Zr-1Mo-1V alloy sheet
pp. 6651-6657(7)
Authors: Shi, Yaowu; Zhong, Fei; Li, Xiaoyan; Gong, Shuili; Chen, Li

The effect of bonding force on the electrical performance and reliability of NCA joints processed at a lowered temperature
pp. 6658-6664(7)
Authors: Ma, Y.; Chan, Y.

Crystallization behaviour and mechanical properties of rapidly solidified Al_87.5Ni₇Mm₅Fe_0.5 amorphous alloy
pp. 6665-6671(7)
Authors: Sahoo, K.; Poddar, P.; Das, Goutam; Kumar, B.

Homogeneous and heterogeneous melting behavior of bulk and nanometer-sized Cu systems: a numerical study
pp. 6672-6683(12)
Authors: Manai, G.; Delogu, F.

Preparation and characterization of morph-genetic C/TiN composites from filter paper
pp. 6684-6688(5)
Authors: Wang, Wei; Jin, ZhiHao; Xue, Tao; Qiao, GuanJun

Selective synthesis of brookite, anatase and rutile nanoparticles: thermolysis of TiCl₄ in aqueous nitric acid
pp. 6689-6695(7)
Authors: Cassaignon, Sophie; Koelsch, Magali; Jolivet, Jean-Pierre

Effects of oxygen partial pressure control on the microstructure and PTCR properties of Ho doped BaTiO₃
pp. 6696-6700(5)
Authors: Jo, Soo; Han, Young; Choi, Kwang

Fracture behavior and microstructure of steel fiber reinforced cast iron
pp. 6701-6707(7)
Authors: Şimşir, Mehmet

Preparation and characterization of epoxy nanocomposites by using PEO-grafted silica particles as modifier
pp. 6708-6715(8)
Authors: Lu, Shao-Rong; Wei, Chun; Yu, Jin-Hong; Yang, Xiao-Wang; Jiang, Yu-Mei

Synthesis of BaMoO₄ hollow spheres
pp. 6716-6719(4)
Authors: Zhao, Xiufeng; Cheung, Teresa; Xi, Yanyan; Chung, K.; Ng, Dickon; Yu, Jiaguo

Hot corrosion mechanism of tundish plaster with steel slags in continuous casting
pp. 6720-6728(9)
Authors: Moshtaghioun, B.; Monshi, Ahmad

Macro, micro and nanostructure of TiO₂ anodised films prepared in a fluorine-containing electrolyte
pp. 6729-6734(6)
Authors: Jaroenworaluck, Angkhana; Regonini, Domenico; Bowen, Chris; Stevens, Ron; Allsopp, Duncan

Observation of carbonaceous mesophase behaviors in phenolated sawdust using polarized light microscopy
pp. 6735-6741(7)
Authors: Zhou, Jie; Zhao, Bin; Gan, Qi; Wang, Rui; Lai, Yi; Zhang, Di; Hu, Ke

Fabrication and properties of thin-shell monolithic piezoelectric ceramic transducers
pp. 6742-6748(7)
Author: Alkoy, Sedat

Thermal conductivity of ceramic particle filled polymer composites and theoretical predictions
pp. 6749-6754(6)
Authors: He, Hong; Fu, Renli; Han, Yanchun; Shen, Yuan; Song, Xiufeng

Absorption and emission spectral analysis of Pr³⁺: tellurite glasses
pp. 6755-6761(7)
Authors: Annapurna, K.; Chakrabarti, Ritwika; Buddhudu, S.

Systematic study on the influence of growth parameters on island density exponent, size distribution and scaling behaviour
pp. 6762-6768(7)
Authors: Shrestha, Shankar; Park, Chong-Yun

Wear behavior of TiB₂ inoculated 20Cr-3Mo-4C high chromium white cast irons
pp. 6769-6778(10)
Author: Yilmaz, Serdar

A study on the synthesis and characterisation of nanocrystalline transition metal oxynitrides
pp. 6779-6786(8)
Authors: Wang, Yuhong; Lesterb, Edward; Gregory, Duncan

Synthesis and piezoelectric properties of (Na_0.5Bi_0.5)_0.94Ba_0.06TiO₃ ceramics prepared by sol-gel auto-combustion method
pp. 6787-6791(5)
Authors: Hou, Jun-Gang; Qu, Yuan-Fang; Ma, Wei-Bing; Shan, Dan

Carbonate binders by “cold sintering” of calcium carbonate
pp. 6792-6797(6)
Authors: Silva, Premalatha; Bucea, Liana; Sirivivatnanon, Vute; Moorehead, David

Mechanical properties and microstructure of Al₂O₃/mullite composite
pp. 6798-6802(5)
Authors: Zhang, F.; Luo, H.; Roberts, S.

Properties of barium-strontium titanate PTCR ceramics sintered on different powder beds
pp. 6803-6808(6)
Authors: Bomlai, Pornsuda; Milne, Steven

Solute adsorption and exclusion studies of the structure of never-dried and re-wetted cellulosic fibres
pp. 6809-6818(10)
Authors: Ibbett, R.; Kaenthong, S.; Phillips, D.; Wilding, M.

Combustion synthesis and luminescence characteristic of Eu³⁺-doped barium stannate nanocrystals
pp. 6819-6823(5)
Authors: Wang, Shumei; Yang, Zhongsen; Zhou, Guangjun; Lu, Mengkai; Zhou, Yuanyuan; Zhang, Haiping

Surfactant-assisted hydrothermal preparation of submicrometer-sized two-dimensional BiFeO₃ plates and their photocatalytic activity
pp. 6824-6827(4)
Authors: Xiaomeng, L; Jimin, Xie; Yuanzhi, Song; Jiamin, Lin

Temperature dependence of the local Seebeck coefficient near the boundary in touching Cu/Bi-Te/Cu composites
pp. 6828-6836(9)
Authors: Yamashita, Osamu; Odahara, Hirotaka

A comparative study of the volume stability of C-S-H (I) and Portland cement paste in aqueous salt solutions
pp. 6837-6846(10)
Authors: Dramé, H.; Beaudoin, J.; Raki, L.

Thermoelectrical properties and optical third harmonic generation of Gd-doped PbTe
pp. 6847-6853(7)
Authors: Nouneh, K.; Plucinski, K.; Bakasse, M.; Kityk, I.

Exploring the relationship between ferrite fraction and morphology and the electromagnetic properties of steel
pp. 6854-6861(8)
Authors: Yin, W.; Peyton, A.; Strangwood, M.; Davis, C.

Effects of hydrogenation and aging on the optical properties in porous Si layers
pp. 6862-6865(4)
Authors: Oh, Do-Hyun; Lee, Soojin; Cho, Woon-Jo; Kim, Tae

Influence of thermal and mechanical surface modifications induced by laser shock processing on the initiation of corrosion pits in 316L stainless steel
pp. 6866-6877(12)
Authors: Peyre, Patrice; Carboni, C.; Forget, P.; Beranger, G.; Lemaitre, C.; Stuart, D.

Synthesis of beta silicon carbide powders from biomass gasification residue
pp. 6878-6886(9)
Authors: Galvagno, Sergio; Portofino, Sabrina; Casciaro, Giovanni; Casu, Stefania; d'Aquino, Luigi; Martino, Maria; Russo, Antonio; Bezzi, Giovanni

The influence of alloying Fe₅₉Pt₄₁ thin films with Co on their magnetic and microstructural properties
pp. 6887-6894(8)
Authors: Lai, Yu; Chang, Yen; Chen, Yen; Lin, Hui-Jan; Chen, Guo

Stresses in superconductor during oxygenation
pp. 6895-6900(6)
Author: Ceniga, Ladislav

Hot deformation behavior of in situ synthesized Ti composite reinforced with 5 vol.% (TiB + TiC) particles
pp. 6901-6906(6)
Authors: Ma, Feng-cang; Lu, Wei-jie; Qin, Ji-ning; Zhang, Di

An investigation on the surface properties of lyocell-based carbon fiber with inverse gas chromatography
pp. 6907-6912(6)
Authors: Peng, Shun-jin; Zou, Qi-chao

Effect of size non-uniformity on photoluminescence from ensembles of InAs quantum dots embedded in GaAs
pp. 6913-6916(4)
Author: Tang, Naiyun

Fabrication and characterization of fine-grained barium strontium titanate ceramics by the heterogeneous precipitation method
pp. 6917-6922(6)
Authors: Mao, Chaoliang; Dong, Xianlin; Zeng, Tao; Wang, Genshui

The effect of Fe addition on processing and mechanical properties of reaction infiltrated boron carbide-based composites
pp. 6923-6928(6)
Authors: Mizrahi, I.; Raviv, A.; Dilman, H.; Aizenshtein, M.; Dariel, M.; Frage, N.

Disordering and the electronic transport behaviors of NbC-Al₄C₃-C composite
pp. 6929-6934(6)
Authors: Li, D.; Ma, S.; Li, W.; Wu, B.; Zhang, Z.

Cyclic loading and marine environment effects on the properties of HDPE umbilical cables
pp. 6935-6941(7)
Authors: Cárdenas, Nelson; Machado, Izabel; Gonçalves, Edison

Synthesis and fluorescence spectrum analysis of CdS nanocrystals
pp. 6942-6945(4)
Authors: Xu, Wanbang; Wang, Yongxian; Xu, Ronghui; Liang, Sheng; Zhang, Guoxin; Yin, Duanzhi

Surface reactivity and electrophoretic deposition of ZrO₂-MgO mechanical mixture
pp. 6946-6950(5)
Authors: Castro, Ricardo; Marcos, Paulo; Sakamoto, Eduardo; Gouvêa, Douglas

Preparation of inorganic-organic pillared montmorillonite using ultrasonic treatment
pp. 6951-6955(5)
Authors: Guo, Huiming; Jing, Xiaoyan; Zhang, Lulu; Wang, Jun

Investigation of PbZr_0.4Ti_0.6O₃ capacitors with room temperature as-grown LaNiO₃ electrodes
pp. 6956-6960(5)
Authors: Liu, B.; Li, F.; Cheng, C.; Wu, D.; Yan, X.; Bian, F.; Yan, Z.; Zhao, Q.; Zhang, X.

Synthesis and electrochemical application of carbon nanotubes obtained from hexachloroethane
pp. 6961-6964(4)
Authors: Shao, Mingwang; Li, Min; Ban, Huizhao; Niu, Liling; Wang, Hong; Pan, Shiyan

Physical properties of methyltrimethoxysilane based elastic silica aerogels prepared by the two-stage sol-gel process
pp. 6965-6971(7)
Authors: Hegde, Nagaraja; Venkateswara Rao, A.

Synthesis and electrocatalytic activity of multi-walled carbon nanotubes/Cu-Ag nanocomposites
pp. 6972-6976(5)
Authors: Xu, Jing; Wei, Xian-Wen; Song, Xiao-Jie; Lu, Xiao-Jing; Ji, Chang-Chun; Ni, Yong-Hong; Zhao, Guang-Chao

Shape-selective synthesis of CeO₂ via an EDTA-assisted route
pp. 6977-6981(5)
Authors: Chen, Guozhu; Sun, Sixiu; Song, Xinyu; Yin, Zhilei; Yu, Haiyun; Fan, Chunhua; Zhao, Wei

Effect of 80 MeV oxygen ion beam irradiation on the properties of CdTe thin films
pp. 6982-6988(7)
Authors: Sathyamoorthy, R.; Chandramohan, S.; Sudhagar, P.; Kanjilal, D.; Kabiraj, D.; Asokan, K.; Vijayakumar, K.

Compositional, temperature and frequency dependence of dielectric behaviour of zinc substituted copper- ferri-chromates
pp. 6989-6995(7)
Authors: Chhantbar, M.; Modi, K.; Joshi, H.

Modeling of precipitation hardening in Mg-based alloys
pp. 6996-7003(8)
Authors: Katsman, Alexander; Cohen, Shalom; Bamberger, Menachem

A fatigue-to-creep correlation in air for application to environmental stress cracking of polyethylene
pp. 7004-7015(12)
Authors: Ayyer, Ravi; Hiltner, Anne; Baer, Eric

Statistical model for characterizing random microstructure of inclusion-matrix composites
pp. 7016-7030(15)
Authors: Al-Ostaz, Ahmed; Diwakar, Anipindi; Alzebdeh, Khalid

Direct assembly process: a novel fabrication technique for large strain ionic polymer transducers
pp. 7031-7041(11)
Authors: Akle, Barbar; Bennett, Matthew; Leo, Donald; Wiles, Kenton; McGrath, James

Efficient up-converted white emission in Er³⁺, Tm³⁺ and Yb³⁺ tridoped NaYF₄ powders
pp. 7042-7045(4)
Authors: Yang, X.; Xiao, S.; Ding, J.; Yan, X.

An investigation on the thermodynamic stability of V₆Si₅
pp. 7046-7048(3)
Authors: Zhang, Chao; Wang, Jiong; Du, Yong; Zhang, Wenqing

The fracture and fatigue behaviour of nano-modified epoxy polymers
pp. 7049-7051(3)
Authors: Blackman, B.; Kinloch, A.; Sohn Lee, J.; Taylor, A.; Agarwal, R.; Schueneman, G.; Sprenger, S.

Effects of Gd doping on the sintering and microwave dielectric properties of BiNbO₄ ceramics
pp. 7052-7055(4)
Authors: Pang, Yue; Zhong, Chaowei; Zhang, Shuren