Journal of Materials Science

Preparation of surfactant templated nanoporous silica spherical particles by the Stöber method. Effect of solvent composition on the particle size
pp. 5299-5306(8)
Authors: Shimura, Naoki; Ogawa, Makoto

Microstructural evolution during direct laser sintering in the Al₂O₃-SiO₂ system
pp. 5307-5311(5)
Authors: Heinrich, Jürgen; Gahler, André; Günster, Jens; Schmücker, Martin; Zhang, Jingxian; Jiang, Dongliang; Ruan, Meiling

The structural deformations in the Si/SiGe system induced by thermal annealing
pp. 5312-5317(6)
Authors: Zheng, Shuqi; Mori, M.; Tambo, T.; Tatsuyama, C.

Microhardness of quenched and annealed isotactic polypropylene
pp. 5318-5326(9)
Authors: Koch, Thomas; Seidler, Sabine; Halwax, Erich; Bernstorff, Sigrid

Effect of strain rate and environment on the mechanical properties of the Ni-19Si-3Nb-0.15B-0.1C intermetallic alloy at high temperatures
pp. 5327-5334(8)
Authors: Fu, C.; Jang, J.; Chang, L.; Lin, T.; Kuo, C.

Effect of Nd substitution on structure and magnetic properties of Nd _x Dy_3−x Fe₅O₁₂ garnet powders
pp. 5335-5339(5)
Authors: Yu, Liming; Wang, Jiujing; Cao, Shixun; Yuan, Shujuan; Zhang, Jincang

Formation of monetite nanoparticles and nanofibers in reverse micelles
pp. 5340-5346(7)
Authors: Wei, Kun; Lai, Chen; Wang, Yingjun

Ballistic-performance optimization of a hybrid carbon-nanotube/E-glass reinforced poly-vinyl-ester-epoxy-matrix composite armor
pp. 5347-5359(13)
Authors: Grujicic, Mica; Pandurangan, B.; Angstadt, D.; Koudela, K.; Cheeseman, B.

Numerical model for nucleation of peritectic alloy during unidirectional solidification
pp. 5360-5368(9)
Authors: Su, Yunpeng; Wang, Meng; Lin, Xin; Chen, Qian; Huang, Weidong

LiMn₂O₄ particles prepared by spray pyrolysis from spray solution with citric acid and ethylene glycol
pp. 5369-5374(6)
Authors: Ju, Seo; Kim, Do; Jo, Eun; Kang, Yun

Formation of bulk Cu₆Sn₅ intermetallic compounds in Sn-Cu lead-free solders during solidification
pp. 5375-5380(6)
Authors: Shen, J.; Liu, Y.; Gao, H.

The effect of porogen on physical properties in MTMS-BTMSE spin-on organosilicates
pp. 5381-5390(10)
Authors: Kim, B.; Son, J.; Ko, M.

Artificial neural network modeling for the prediction of critical transformation temperatures in steels
pp. 5391-5397(7)
Authors: Garcia-Mateo, Carlos; Capdevila, Carlos; Caballero, Francisca; Andrés, Carlos

Effect of low-density filler on mechanical properties of syntactic foams of cyanate ester
pp. 5398-5405(8)
Authors: John, Bibin; Nair, C.; Devi, K.; Ninan, K.

Preparation, spectroscopic properties and enhanced luminescence of Tb³⁺-doped LuAG phosphors and transparent ceramics by introduction of Sc³⁺
pp. 5406-5410(5)
Authors: Liao, Yi-kun; Jiang, Dan-yu; Feng, Tao; Zhang, Na

Annealing effects on the reordering of severe plastic deformed boron doped Ni₃Al
pp. 5411-5415(5)
Authors: Korchef, Atef; Kolsi, Abdelwahab; Njah, Nabil

Laser sintering ZnO thick films for gas sensor application
pp. 5416-5420(5)
Authors: Zhu, Bai; Xie, Chang; Wang, Ai; Wu, Jun; Wu, Run; Liu, Jing

The optical and electrical properties in Nd³⁺ doped lead tungstate single crystals
pp. 5421-5425(5)
Authors: Huang, Yanlin; Seo, Hyo; Zhu, Wenliang

Hollow biomorphic Al₂O₃ fibers produced from sisal
pp. 5426-5430(5)
Authors: Andrade, Tarcisio; Rambo, Carlos; Sieber, Heino; Martinelli, Antonio; Melo, Dulce Maria A.

Effect of grain width and aspect ratio on mechanical properties of Si₃N₄ ceramics
pp. 5431-5436(6)
Authors: Krstic, Zoran; Yu, Zhengbo; Krstic, Vladimir

Effects of milling conditions on hydrogen storage properties of graphite
pp. 5437-5441(5)
Authors: Huang, Zhenguo; Calka, Andrzej; Liu, Huakun

Fabrication and properties of in situ synthesized particles reinforced aluminum matrix composites of Al-Zr-O-B system
pp. 5442-5447(6)
Authors: Li, G.; Zhao, Y.; Dai, Q.; Cheng, X.; Wang, H.; Chen, G.

Fabrication of SiC by carbothermal-reduction reactions of diatomaceous earth
pp. 5448-5451(4)
Authors: Matovic, Branko; Saponjic, Aleksandra; Devecerski, Aleksandar; Miljkovic, Miroslav

Surface chemical investigation into the cleaning procedures of historic tapestry materials. Part 2
pp. 5452-5457(6)
Authors: Howell, David; Mitchell, Rob; Carr, Christopher

Role of coarse intermetallic particles on the environmentally assisted cracking behavior of peak aged and over aged Al-Zn-Mg-Cu-Zr alloy during slow strain rate testing
pp. 5458-5464(7)
Authors: Bobby Kannan, M.; Raja, V.

Structural and magnetic properties of strontium-borate glasses containing iron ions
pp. 5465-5469(5)
Authors: Ardelean, I.; Lungu, R.; Păşcuţă, P.

Electrical conduction and relaxation mechanism in Li₂AlZr[PO₄]₃
pp. 5470-5475(6)
Authors: Savitha, T.; Selvasekarapandian, S.; Ramya, C.; Bhuvaneswari, M.; Angelo, P.

Recrystallization and fracture characteristics of thin copper wire
pp. 5476-5482(7)
Authors: Hung, Fei-Yi; Lui, Truan-Sheng; Chen, Li-Hui; Wang, Yuan-Tin

Investigation on magnetorheological elastomers based on natural rubber
pp. 5483-5489(7)
Authors: Chen, Lin; Gong, Xing-long; Jiang, Wan-quan; Yao, Jing-jing; Deng, Hua-xia; Li, Wei-hua

Effect of simultaneous substitution of La and Mn on dielectric behavior of barium titanate ceramic
pp. 5490-5496(7)
Authors: Om Parkash,; Kumar, Devendra; Dwivedi, R.; Srivastava, K.; Singh, Prakash; Singh, Sindhu

On the solid-state ageing behaviour of the polysaccharide, guar gum
pp. 5497-5507(11)
Authors: Barré, L.; Vaughan, A.; Sutton, S.

Study on structure and performance of polycarbonate urethane synthesized via different copolymerization methods
pp. 5508-5515(8)
Authors: Guo, Jintang; Zhao, Meihua; Ti, Yan; Wang, Bo

Strength and fracture toughness of nano and micron-silica particles bidispersed epoxy composites: evaluated by fragility parameter
pp. 5516-5523(8)
Authors: Kwon, Soon-Chul; Adachi, Tadaharu

Preparation and characterization of poly (styrene-acrylonitrile) (SAN)/clay nanocomposites by melt intercalation
pp. 5524-5533(10)
Authors: Cai, Yibing; Hu, Yuan; Xuan, Shanyong; Zhang, Yi; Deng, Huaxia; Gong, Xinglong; Chen, Zuyao; Fan, Weicheng

Electrorheological properties of polypyrrole-SnO₂-methylcellulose nanocomposite suspensions
pp. 5534-5538(5)
Authors: Yoon, Dae; Kim, Young

Study on titania nanotube arrays prepared by titanium anodization in NH₄F/H₂SO₄ solution
pp. 5539-5543(5)
Authors: Tian, Tian; Xiao, Xiu-feng; Liu, Rong-fang; She, Hou-de; Hu, Xiao-feng

Influences of MonoSilanolIsobutyl-POSS on thermal stability of polymethylsilxoane
pp. 5544-5550(7)
Authors: Liu, Y.; Huang, Y.; Liu, L.

Crystal orientation dependence of anelastic relaxation in 8Y-fully stabilized zirconia
pp. 5551-5555(5)
Authors: Okada, Yasuhiro; Matsuzawa, Masahito; Horibe, Susumu

Role of Ti diffusion on the formation of phases in the Al₂O₃-Al₂O₃ brazed interface
pp. 5556-5561(6)
Authors: Kar, Abhijit; Mandal, Sudipta; Ghosh, Rabindra; Ghosh, Tamal; Ray, Ajoy

Preparation of Y-TZP ceramic fibers by electrolysis-sol-gel method
pp. 5562-5569(8)
Authors: Li, Jianjun; Jiao, Xiuling; Chen, Dairong

Microstructure and properties of an electroconductive SiC-based composite
pp. 5570-5575(6)
Authors: Sciti, Diletta; Balbo, Andrea; Melandri, Cesare; Pezzotti, Giuseppe

Thermal and crystallization behavior of zirconia precursor used in the solution precursor plasma spray process
pp. 5576-5580(5)
Authors: Chen, Dianying; Jordan, Eric; Gell, Maurice

Mechanical properties of electrodeposited nanocrystalline copper using tensile and shear punch tests
pp. 5581-5588(8)
Authors: Guduru, Ramesh; Darling, Kristopher; Scattergood, Ronald; Koch, Carl; Murty, K.

Effect of welding parameters on the strain rate and microstructure of friction stir spot welded 2024 aluminum alloy
pp. 5589-5601(13)
Authors: Gerlich, Adrian; Su, Peter; Yamamoto, Motomichi; North, Tom

Study of welding characteristics of 0.3C-CrMoV(ESR) ultrahigh strength steel
pp. 5602-5612(11)
Authors: Suresh, M.; Sinha, P.; Sarma, D.; Ballal, N.; Krishna Rao, P.

Mechanical vs. electrical failure mechanisms in high voltage, high energy density multilayer ceramic capacitors
pp. 5613-5619(7)
Authors: Young, Amanda; Hilmas, Gregory; Zhang, Shi; Schwartz, Robert

On the non-destructive detection of fatigue damage in industrial aluminium alloys by positron annihilation
pp. 5620-5628(9)
Authors: Holzwarth, Uwe; Schaaff, Petra

Morphological, structural and optical characterization of nickel nanostructures
pp. 5629-5631(3)
Authors: Kaur, Raminder; Verma, N.; Chakarvarti, S.

On structural and high temperature electrochemical properties of ZrO₂ thin film coating on Zr metal produced by carbonate melt
pp. 5632-5640(9)
Authors: Zhang, X.; Zhang, R.; Hu, S.; Liu, T.

Studies on the preparation and structure of polyacrylamide/α-zirconium phosphate nanocomposites
pp. 5641-5646(6)
Authors: Zhang, Rui; Hu, Yuan; Li, Baoguang; Chen, Zuyao; Fan, Weicheng

Acoustic emission during tensile deformation of pre-strained nuclear grade AISI type 304 stainless steel in the unnotched and notched conditions
pp. 5647-5656(10)
Authors: Mukhopadhyay, Chandan; Jayakumar, Tamanna; Raj, Baldev; Ray, Kalyan

Luminescence from praseodymium doped AlN thin films deposited by RF magnetron sputtering and the effect of material structure and thermal annealing on the luminescence
pp. 5657-5660(4)
Authors: Maqbool, Muhammad; Richardson, Hugh; Kordesch, Martin

Crystalline-amorphous phase transition of hyperbranched polyurethane phase change materials for energy storage
pp. 5661-5665(5)
Authors: Cao, Qi; Liu, Pengsheng

Effect of temperature on the creep behavior of a Ni-Cr-Fe-Al alloy: a comparison of the experimental data and a model
pp. 5666-5670(5)
Authors: El-Magd, Essam; Gebhard, Jürgen; Stuhrmann, Jan

Preparation of 3YSZ/Cu composite by in-situ chemical route
pp. 5671-5675(5)
Authors: Ding, Jian; Zhao, Naiqin; Shi, Chunsheng; Du, Xiwen; He, Chunnian; Li, Jiajun

Sol-gel synthesis of Ce-substituted BaFe₁₂O₁₉
pp. 5676-5679(4)
Authors: Sun, Chang; Sun, Kangning

The crystallographic orientation relationship between Al₂O₃ and MgAl₂O₄ in the composite material Al₂O₃/Al-Mg-Si alloy
pp. 5680-5685(6)
Authors: Ikeno, Susumu; Matsuda, Kenji; Matsuki, Toshimasa; Suzuki, Toshiaki; Endo, Noriaki; Kawabata, Tokimasa; Uetani, Yasuhiro

Thermal stress hysteresis and stress relaxation in an epoxy film
pp. 5686-5691(6)
Authors: Thurn, Jeremy; Hermel-Davidock, Theresa

The behaviour of iron and aluminium during the diffusion welding of carbon steel to aluminium
pp. 5692-5699(8)
Authors: Karfoul, M.; Tatlock, Gordon; Murray, Robert

Identification of microstructural zones and thermal cycles in a weldment of modified 9Cr-1Mo steel
pp. 5700-5713(14)
Authors: Paul, V.; Saroja, S.; Hariharan, P.; Rajadurai, A.; Vijayalakshmi, M.

Electrophoretic deposition of alumina on stainless steel from non-aqueous suspension
pp. 5714-5721(8)
Authors: Besra, Laxmidhar; Samantaray, Pravanjan; Bhattacharjee, Sarama; Singh, Bimal

Morphology, microstructure, and residual stress in EBPVD erbia coatings
pp. 5722-5727(6)
Authors: Jankowski, Alan; Saw, Cheng; Ferreira, James; Harper, Jennifer; Hayes, Jeffrey; Pint, Bruce

Development of macropores in calcium carbonate body using novel carbonation method of calcium hydroxide/sodium chloride composite
pp. 5728-5735(8)
Authors: Lee, Yoong; Hahm, Yeong; Matsuya, Shigeki; Nakagawa, Masaharu; Ishikawa, Kunio

Effect of AlN particles on the corrosion behavior of Al/AlN_P composites
pp. 5736-5741(6)
Authors: Liu, ZhangSheng; Wu, BianTao; Gu, MingYuan

Blending and oxygen permeation properties of the blown films of blends of modified polyamide and ethylene vinyl alcohol copolymer with varying vinyl alcohol contents
pp. 5742-5751(10)
Authors: Yeh, Jen-Taut; Chen, Heng-Yi

Conductivity study of polyethylene oxide (PEO) complexed with sodium bicarbonate
pp. 5752-5755(4)
Authors: Siva Kumar, J.; Vijaya Kumar, K.; Subrahmanyam, A.; Jaipal Reddy, M.

Joint formation mechanism and strength in resistance microwelding of 316L stainless steel to Pt wire
pp. 5756-5765(10)
Author: Chen, Zheng

Effect of oxygen partial pressure on the electrical and optical properties of highly (200) oriented p-type Ni_1−x O films by DC sputtering
pp. 5766-5772(7)
Authors: Nandy, Suman; Saha, Biswajit; Mitra, Manoj; Chattopadhyay, K.

Effects of pH on the dispersion and cell performance of LiCoO₂ cathodes based on the aqueous process
pp. 5773-5777(5)
Authors: Li, Chia-Chen; Lee, Jyh-Tsung; Tung, Yi-Ling; Yang, Chang-Rung

Chromium vaporization of the ferritic steel Crofer22APU and ODS Cr5Fe1Y₂O₃ alloy
pp. 5778-5784(7)
Authors: Konysheva, E.; Seeling, U.; Besmehn, A.; Singheiser, L.; Hilpert, K.

Synthesis and characterization of thermoplastic polyurethane/montmorillonite nanocomposites produced by reactive extrusion
pp. 5785-5790(6)
Authors: Cai, Yibing; Hu, Yuan; Song, Lei; Liu, Lei; Wang, Zhengzhou; Chen, Zuyao; Fan, Weicheng

Effect of Y addition on microstructure and martensitic transformation of a Ni-rich Ti-Ni shape memory alloy
pp. 5791-5794(4)
Authors: Liu, A.; Sui, J.; Lei, Y.; Cai, W.; Gao, Z.; Zhao, L.

Fabrication and characterization of SiC_w/MoSi₂ composite from COSHSed powder
pp. 5795-5798(4)
Authors: Xu, Jianguang; Zhang, Baolin; Jiang, Guojian; Li, Wenlan; Zhuang, Hanrui

Comparison of the fluoride, arsenate and nitrate anions water depollution potential of a calcined quintinite, a layered double hydroxide compound
pp. 5799-5804(6)
Authors: Delorme, Fabian; Seron, Alain; Gautier, Anne; Crouzet, Catherine

DEPP functionally graded piezoceramics via micro-fabrication by co-extrusion
pp. 5805-5814(10)
Authors: Alexander, Paul; Brei, Diann; Halloran, John

A theoretical description of large viscoplastic shear deformation in metals
pp. 5815-5825(11)
Author: Spathis, G.

Experimental and numerical study of elastic behavior of heterogeneous model materials with spherical inclusions
pp. 5826-5834(9)
Authors: Tessier-Doyen, N.; Glandus, J.; Huger, M.

Evaluating environmental stress cracking thresholds by contact angle measurements
pp. 5835-5844(10)
Authors: Walsh, Peter; Lesser, Alan

Studies on machinability of Al/Si_p + SiC_p composite materials
pp. 5845-5850(6)
Authors: Zhang, Qiguo; Qiu, Jianxun; Wang, Yi; Gu, Mingyuan

Perovskite-type oxides as susceptor materials in dielectric heating
pp. 5851-5859(9)
Authors: Zhang-Steenwinkel, Y.; Castricum, H.; Bliek, A.; Esveld, E.

Preparation and electrical properties of sintered oxides composed of Mn_1.5Co_(0.25+X)Ni_(1.25-X)O₄ ( 0 ≤ X ≤ 0.75 ) with a cubic spinel structure
pp. 5860-5866(7)
Authors: Yokoyama, T.; Meguro, T.; Shimada, Y.; Tatami, J.; Komeya, K.; Abe, Y.

Crystal microstructure suitable for high-performance thermoelectric bulk materials
pp. 5867-5874(8)
Authors: Yamashita, Osamu; Odahara, Hirotaka

Dielectric behavior of Cu-GeO₂ cermet thin films
pp. 5875-5879(5)
Author: Lucy, Irine

High temperature biaxial strength of porous mullite-alumina and mullite-zirconia ceramics
pp. 5880-5882(3)
Authors: Latella, Bruno; Mehrtens, Edward

Subsolidus phase equilibria in the RuO₂-ZnO-SiO₂ system
pp. 5883-5885(3)
Authors: Hrovat, Marko; Holc, Janez; Glinšek, Sebastjan

Preparation of biodegradable poly(3-hydroxybutyrate) (PHB) and poly(ethylene glycol) (PEG) graft copolymer
pp. 5886-5890(5)
Authors: Zhijiang, Cai; Zhihong, Wen

Synthesis of silicon carbide nanorods from mixture of polymer and sol-gel silica
pp. 5891-5895(5)
Authors: Raman, V.; Bhatia, G.; Sengupta, P.; Srivastava, A.; Sood, K.

Growth of single phase tetragonal structure iron tantalum oxide thin films grown by sol-gel spin coating technique
pp. 5896-5896(1)
Authors: Phani, A.; Santucci, S.