Journal of Materials Science

A novel method for massive fabrication of β-SiC nanowires
pp. 4125-4130(6)
Authors: Li, F.; Wen, G.

Pre-yield tensile set of a semi-crystalline polymer, its blend and composite
pp. 4131-4135(5)
Authors: Zuiderduin, W.; Huétink, J.; Gaymans, R.

The synthesis, swelling behaviour and rheological properties of chemically crosslinked thermosensitive copolymers based on N-isopropylacrylamide
pp. 4136-4148(13)
Authors: Geever, Luke; Mínguez, César; Devine, Declan; Nugent, Michael; Kennedy, James; Lyons, John; Hanley, Austin; Devery, Sinead; Tomkins, Paul; Higginbotham, Clement

Reaction sintering of intermetallic-reinforced composite materials
pp. 4149-4158(10)
Authors: MacAskill, I.; Bishop, D.

Molecular dynamics simulations of atomic-level brittle fracture mechanisms in amorphous silica
pp. 4159-4169(11)
Authors: Muralidharan, Krishna; Oh, Ki-Dong; Deymier, P.; Runge, K.; Simmons, J.

X-ray irradiation induced optical absorptions in silver and manganese doped soda-lime silicate glass
pp. 4170-4176(7)
Authors: Sheng, Jiawei; Jiang, Liqiang

A multi-scaled model for the fracture toughness of an aluminum alloy
pp. 4177-4182(6)
Authors: Song, Min; Chen, Kang; Qi, Xiong; Huang, Lan

In situ synthesized ceramic-polymer composites for bone tissue engineering: bioactivity and degradation studies
pp. 4183-4190(8)
Authors: Khan, Yusuf; Cushnie, Emily; Kelleher, John; Laurencin, Cato

Interfacial stress transfer of fiber pullout for carbon nanotubes with a composite coating
pp. 4191-4196(6)
Authors: Natsuki, Toshiaki; Wang, Feng; Ni, Q.; Endo, Morinobu

The influence of magnetron sputtered silver and titanium coatings on the compaction and properties of surface modified PM Ti-48Al powders
pp. 4197-4204(8)
Authors: Neves, Filipe; Duarte, Nelson; Trindade, Bruno

Intermetallic Fe _x Al _y -phases in a steel/Al-alloy fusion weld
pp. 4205-4214(10)
Authors: Agudo, Leonardo; Eyidi, Dominique; Schmaranzer, Christian; Arenholz, Enno; Jank, Nasrin; Bruckner, Jürgen; Pyzalla, Anke

Strengthening mechanism of load sharing of particulate reinforcements in a metal matrix composite
pp. 4215-4226(12)
Authors: Zong, Bernie; Zhang, Fang; Wang, Gang; Zuo, Liang

Aluminum hydroxide filled ethylene vinyl acetate (EVA) composites: effect of the interfacial compatibilizer and the particle size
pp. 4227-4232(6)
Authors: Zhang, Ling; Li, Chun; Zhou, Qiuling; Shao, Wei

Cooling rate dependent as-cast microstructure and mechanical properties of Zr-based metallic glasses
pp. 4233-4239(7)
Authors: Yan, M.; Shen, J.; Sun, J.; Zou, J.

Preparation of carbon nanofibers over carbon nanotube-nickel catalyst in propylene decomposition
pp. 4240-4244(5)
Authors: Zhao, Yun; Li, Chunhua; Yao, Kefu; Liang, Ji

Carbon fiber/ceramic matrix composites: processing, oxidation and mechanical properties
pp. 4245-4253(9)
Authors: Omena Pina, Samanta; Pardini, Luiz; Yoshida, Inez

Synthesis and characterization of zinc oxide fine particles coated with titania/PDMS hybrid
pp. 4254-4259(6)
Authors: Nakade, Masato; Ogawa, Makoto

Effect of structure change on thermal and dielectric characteristics in low-temperature firing Bi₂O₃-B₂O₃-ZnO glasses
pp. 4260-4264(5)
Authors: Kim, Byung-Sook; Lim, Eun-Sub; Lee, Joon-Hyung; Kim, Jeong-Joo

Luminescent stability of water-soluble PbS nanoparticles
pp. 4265-4269(5)
Authors: Zhao, Xu-Sheng; Xu, She-Yang; Liang, Li-Yan; Li, Tao; Cauchi, Sam

Dielectric, ferroelectric and piezoelectric properties of (1 − x)[Pb_0.91La_0.09(Zr_0.60Ti_0.40)O₃]-x[Pb(Mg_1/3Nb_2/3)O₃], 0 ≤ x ≤ 1
pp. 4270-4275(6)
Authors: Sahoo, Benudhar; Panda, Prasanta

Calorimetric studies of 8090 and 1441 Al-Li-Cu-Mg-Zr alloys of conventional and retrogressed and reaged tempers
pp. 4276-4290(15)
Authors: Ghosh, K.; Das, K.; Chatterjee, U.

Containerless processing of a lithium disilicate glass
pp. 4291-4297(7)
Authors: Ranasinghe, K.; Ray, C.; Day, D.; Rogers, J.; Hyers, R.; Rathz, T.

Hardness and tensile strength of multifilamentary metal-matrix composite superconductors for the Large Hadron Collider (LHC)
pp. 4298-4307(10)
Authors: Scheuerlein, Christian; Boutboul, Thierry; Leroy, Daniel; Oberli, Luc; Rehmer, Birgit

Influence of pad span on fretting fatigue behaviour of AISI 304 stainless steel
pp. 4308-4315(8)
Authors: Jayaprakash, M.; Ganesh Sundara Raman, S.

Experimental study of the quasi-static and dynamic behaviour of cork under compressive loading
pp. 4316-4324(9)
Authors: Gameiro, Celina; Cirne, José; Gary, Gérard

Combustion and thermal properties of OctaTMA-POSS/PS composites
pp. 4325-4333(9)
Authors: Liu, Lei; Hu, Yuan; Song, Lei; Nazare, Shonali; He, Shuqin; Hull, Richard

Martensite/particle interactions and the shape memory effect in an Fe-Mn-Si-based alloy
pp. 4334-4343(10)
Authors: Stanford, Nicole; Dunne, Druce

Bis-ortho-diynylarene polymerization as a route to solid and hollow carbon fibers
pp. 4344-4349(6)
Authors: Zengin, Huseyin; Smith, Dennis

Fabrication and characterization of PE/MMT nanocomposites via copolymerization of ethylene and in situ formed α-olefins
pp. 4350-4355(6)
Authors: Qian, Jinhua; Guo, Cun-Yue; Wang, Hang; Hu, Youliang

The size refinement of Cu crystallites under mechanical processing conditions: a phenomenological modeling approach
pp. 4356-4363(8)
Authors: Delogu, F.; Cocco, G.

The effect of microstructure and applied stress on magnetic Barkhausen emission in induction hardened steel
pp. 4364-4371(8)
Authors: Blaow, Mohamed; Evans, John; Shaw, Brian

The effect of microstructure on the permeability of metallic foams
pp. 4372-4383(12)
Authors: Medraj, Mamoun; Baril, Eric; Loya, Virendra; Lefebvre, Louis-Philippe

Investigations on coating durability and tenso-resistive effect of carbon black-coated polycaprolactam fibers
pp. 4384-4389(6)
Authors: Jin, Xin; Xiao, Changfa; An, Shulin; Jia, Guangxia

The permeability and stability of microencapsulated epoxy resins
pp. 4390-4397(8)
Authors: Yuan, Li; Liang, Guo-Zheng; Xie, Jian-Qiang; Li, Lan; Guo, Jing

Application of uniform design in optimisation of three stage ageing of Al-Cu-Mg alloys
pp. 4398-4405(8)
Authors: Gao, N.; Starink, M.; Kamp, N.; Sinclair, I.

Novel sodium alginate composite membranes prepared by incorporating cobalt(III) complex particles used in pervaporation separation of water-acetic acid mixtures at different temperatures
pp. 4406-4417(12)
Authors: Veerapur, Ravindra; Gudasi, K.; Sairam, M.; Shenoy, R.; Netaji, M.; Raju, K.; Sreedhar, B.; Aminabhavi, Tejraj

Co-precipitation synthesis of Nd:YAG nano-powders: the effect of Nd dopant addition with thermal treatment
pp. 4418-4427(10)
Authors: Caponetti, Eugenio; Saladino, Maria; Serra, Filomena; Enzo, Stefano

Hot embossing of grating-based optically variable images in thermoplastic acrylic lacquer
pp. 4428-4434(7)
Authors: Leech, P.; Lee, R.

Effect of neodymium on microstructure and corrosion resistance of AZ91 magnesium alloy
pp. 4435-4440(6)
Authors: Song, Y.; Liu, Yao; Yu, S.; Zhu, X.; Wang, S.

Experimental study of the transverse mechanical properties of polyamide 6.6 monofilaments
pp. 4441-4450(10)
Authors: Stamoulis, Georgios; Wagner-Kocher, Christiane; Renner, Marc

Preparation of UV-curable intercalated/exfoliated epoxide/acrylateclays nanocomposite resins
pp. 4451-4460(10)
Authors: Wang, Yu-Young; Hsieh, Tsung-Eong

Synthesis of 3-dimensional mesoporous silica using a di-block copolymer template
pp. 4461-4469(9)
Authors: Ju, Jinlan; Xiao, Huining; Zhang, Zisheng

Investigation on reliability of nanolayer-grained Ti₃SiC₂ via Weibull statistics
pp. 4470-4475(6)
Authors: Bao, Y.; Zhou, Y.; Zhang, H.

Novel green-emitting polymer containing fluorene and 1-(2-benzothiazolyl)-3,5-diphenylpyrazoline
pp. 4476-4479(4)
Authors: Zhang, Huaxi; Li, Ying; Jiang, Qing; Xie, Minggui; Peng, Junbiao; Cao, Yong

Improvement electrical properties of sol-gel derived lead zirconate titanate thick films for ultrasonic transducer application
pp. 4480-4484(5)
Authors: Zhou, Q.; Shung, K.; Huang, Y.

Relationship between thermal and sliding wear behavior of Al6061/Al₂O₃ metal matrix composites
pp. 4485-4493(9)
Authors: Yılmaz, Serdar; Buytoz, Soner

Study on the morphology, rheology and surface of dynamically vulcanized chlorinated butyl rubber/polyethylacrylate extrudates: effect of extrusion temperature and times
pp. 4494-4501(8)
Authors: Wu, Jinrong; Pan, Qiying; Huang, Guangsu

Thermal and optical properties of zinc halotellurite glasses
pp. 4502-4507(6)
Author: Yousef, El

Mesocarbon microbeads supported PtSn catalysts for electrochemical oxidation of ethanol
pp. 4508-4512(5)
Authors: Bai, Yuxia; Li, Jinfeng; Qiu, Xinping; Wu, Jianjun; Wang, Jianshe; Xi, Jingyu; Zhu, Wentao; Chen, Liquan

Cyclic indentation in aluminum
pp. 4513-4520(8)
Authors: Yang, Fuqian; Peng, Lingling; Okazaki, Kenji

Crystal morphologies in thin films of PEO/PMMA blends
pp. 4521-4529(9)
Authors: Okerberg, B.; Marand, H.

Hydrothermal corrosion behavior of iron aluminide under SCWO conditions
pp. 4530-4534(5)
Authors: Shankar Rao, V.; Kwon, H.

Some aspects of corrosion and film formation of austenitic stainless steel type 316LN using electrochemical impedance spectroscopy (EIS)
pp. 4535-4544(10)
Authors: Pujar, Mohan; Parvathavarthini, N.; Dayal, R.

Metal-ceramic composite layers on stainless steel through the combination of electrophoretic deposition and galvanic processes
pp. 4545-4551(7)
Authors: Knote, A.; Krüger, H.; Selve, S.; Kups, Th.; Kern, H.; Spiess, L.

Sorption and diffusion of aromatic solvents through linear low density polyethylene-ethylene vinyl acetate blend membranes
pp. 4552-4561(10)
Authors: Moly, K.; Bhagawan, S.; George, Soney; Thomas, S.

A constitutive equation for the dynamic deformation behavior of polymers
pp. 4562-4574(13)
Authors: Zerilli, F.; Armstrong, R.

Analysis of gas sensing behaviors of carbon black/waterborne polyurethane composites in low concentration organic vapors
pp. 4575-4580(6)
Authors: Zhao, Bin; Fu, Ruo; Zhang, Ming; Zhang, Bin; Zeng, Wei; Rong, Min; Zheng, Qiang

Microstructural characterisation by X-ray scattering of perovskite-type La_0.8Sr_0.2MnO_3±δ thin films prepared by a dip-coating process
pp. 4581-4590(10)
Authors: Lenormand, P.; Lecomte, A.; Laberty-Robert, C.; Ansart, F.; Boulle, A.

Physical properties of low-k films based on the co-condensation of methyltrimethoxysilane with a bridged silsesquioxane
pp. 4591-4602(12)
Authors: Kim, B.; Kang, J.; Lee, K.; Son, J.; Ko, M.

Effect of bentonite on the structure and mechanical properties of CE/CTBN system
pp. 4603-4608(6)
Authors: Fang, Zhengping; Shi, Honghao; Gu, Aijuan; Feng, Yu

Micro-mechanics based derivation of the materials constitutive relations for carbon-nanotube reinforced poly-vinyl-ester-epoxy based composites
pp. 4609-4623(15)
Authors: Grujicic, Mica; Angstadt, D.; Sun, Y.; Koudela, K.

Effects of calcination conditions on phase and morphology evolution of lead zirconate powders synthesized by solid-state reaction
pp. 4624-4629(6)
Authors: Chaisan, W.; Khamman, O.; Yimnirun, R.; Ananta, S.

Reaction sequences and influence factors during carbothermal synthesis of ultrafine TiN powders
pp. 4630-4635(6)
Authors: Xiang, Daoping; Liu, Ying; Zhao, Zhiwei; Gao, Shengji; Tu, Mingjing

Investigation of Sm → Ca substitution in Bi(Pb)SrCaCuO high temperature superconductor by low field AC magnetic susceptibility
pp. 4636-4641(6)
Authors: Terzioglu, Cabir; Yegen, Dincer; Yılmazlar, Mustafa; Gorur, Osman; Akdogan, Mustafa; Varilci, Ahmet

Effect of microstructure on the modulus of PAN-based carbon fibers during high temperature treatment and hot stretching graphitization
pp. 4642-4649(8)
Authors: Li, Dongfeng; Wang, Haojing; Wang, Xinkui

Structure of yttria stabilized zirconia beads produced by gel supported precipitation
pp. 4650-4658(9)
Authors: Walter, M.; Somers, J.; Fernandez, A.; Specht, E.; Hunn, J.; Boulet, P.; Denecke, M.; Göbel, C.

Microstructure, strength and tribological behavior of Fe-C-Cu-Ni sintered steels prepared with MoS₂ addition
pp. 4659-4666(8)
Authors: Dhanasekaran, S.; Gnanamoorthy, R.

Formation of aluminosilicate geopolymers from 1:1 layer-lattice minerals pre-treated by various methods: a comparative study
pp. 4667-4674(8)
Authors: MacKenzie, Kenneth; Brew, Dan; Fletcher, Ross; Vagana, R.

Growth and characterization of high resistivity c-axis oriented ZnO films on different substrates by RF magnetron sputtering for MEMS applications
pp. 4675-4683(9)
Authors: Singh, Ravindra; Kumar, Mahesh; Chandra, Sudhir

Low temperature oxidation of copper alloys—AEM and AFM characterization
pp. 4684-4691(8)
Authors: Honkanen, Mari; Vippola, Minnamari; Lepistö, Toivo

Experimental investigation on constitutive behaviour of superconducting powder BSCCO
pp. 4692-4700(9)
Authors: Zhao, Yinghong; Zeng, Pan; Lei, Liping; Yi, Hanping

Microstructure characterization of in situ synthesized porous Si₃N₄-Si₂N₂O composites using feldspar additive
pp. 4701-4706(6)
Authors: Paul, Rajat; Lee, Chi-Woo; Kim, Hai-Doo; Lee, Byong-Taek

Nickel and zirconia toughened alumina prepared by hydrothermal processing
pp. 4707-4711(5)
Authors: Jia, Husheng; Liu, Xin; Li, Tianbao; Yan, Hong; Liu, Xuguang; Xu, Bingshe

Improvement of mechanical properties of Poly (l-lactic acid) by blending of lysine triisocyanate
pp. 4712-4715(4)
Authors: Todo, Mitsugu; Takayama, Tetsuo

SEM-ECC observations of dislocation structures in a cyclically deformed Cu single crystal oriented for [ 2¯23 ] conjugate double slip
pp. 4716-4719(4)
Authors: Li, Xiao-Wu; Zhou, Yang