Journal of Materials Science

Impact properties of glass/plant fibre hybrid laminates
pp. 3699-3707(9)
Author: Santulli, Carlo

Electronic properties of calcined materials from a scandium-O-phenylene-O-yttrium-O-phenylene hybrid copolymer
pp. 3708-3713(6)
Authors: Kawahara, Tetsuro; Kuroda, Taketoshi; Matsui, Hideo; Mishima, Masaru; Karuppuchamy, Subbian; Seguchi, Yasuhiro; Yoshihara, Masakuni

Effect of face sheet material on the indentation response of metallic foams
pp. 3714-3723(10)
Authors: Mohan, Kapil; Yip, Tick-Hon; Sridhar, Idapalapati; Seow, H.

Volume relaxation in amorphous and semicrystalline PET
pp. 3724-3731(8)
Authors: Hadač, Jiří; Slobodian, Petr; Sáha, Petr

Influence of electron irradiation on the crystallisation, molecular weight and mechanical properties of poly-(R)-3-hydroxybutyrate
pp. 3732-3738(7)
Authors: Bergmann, Antje; Teßmar, Jörg; Owen, Anthony

Effect of MgF₂ on hot pressed hydroxylapatite and monoclinic zirconia composites
pp. 3739-3744(6)
Authors: Evis, Zafer; Doremus, Robert

A novel technology for powder dispersion and surface modification
pp. 3745-3753(9)
Authors: Cai, Chu-jiang; Shen, Zhi-gang; Zheng, Yan-hong; Xing, Yu-shan; Ma, Shu-lin

Influence of calcination conditions on phase formation and particle size of indium niobate powders synthesized by the solid-state reaction
pp. 3754-3760(7)
Authors: Wongsaenmai, S.; Yimnirun, R.; Ananta, S.

Biomorphic TiN/C ceramics prepared by reduction-nitridation of charcoal/titania composite
pp. 3761-3766(6)
Authors: Luo, Min; Gao, Jiqiang; Zhang, Xiao; Hou, Guangya; Yang, Jianfeng; Ouyang, Da; Wang, Hongjie; Jin, Zhihao

Citrate-nitrate combustion route to the synthesis of (1−x)LaCrO₃-xBiCrO₃ solid solution
pp. 3767-3771(5)
Authors: Chen, Jennifer; Ye, Zuo-Guang

Effects of the deposition and patterning processes of the top electrode on the ferroelectric properties of Pt/Pb(Zr,Ti)O₃/Pt thin film capacitors
pp. 3772-3777(6)
Authors: Lee, Eun; Lee, Jae; Kim, Sun

Observation of an ultraviolet emission band in TiO₂ nanocrystals doped with Eu³⁺
pp. 3778-3782(5)
Authors: Zeng, Q.; Ding, Z.; Zhang, Z.

Radar wave absorbing characterization of bicomponent fibers
pp. 3783-3788(6)
Authors: Yu, Bin; Qi, Lu; Sun, Hui; Ye, Jian-zhong

Candidate mechanisms controlling the electrical characteristics of silica/XLPE nanodielectrics
pp. 3789-3799(11)
Authors: Roy, Mihir; Nelson, J.; MacCrone, R.; Schadler, L.

Synthesis of silicon carbide nanorods without defects by direct heating method
pp. 3800-3804(5)
Authors: Wu, Renbing; Yang, Guang; Pan, Yi; Chen, Jian

Synthesis of encapsulating and hollow onion-like fullerenes from coal
pp. 3805-3809(5)
Authors: Fu, Dongju; Liu, Xuguang; Lin, Xian; Li, Tianbao; Jia, Husheng; Xu, Bingshe

Worm-like morphology of semi-rigid substituted poly(p-phenylene)
pp. 3810-3815(6)
Authors: Dijkstra, Dirk; Karbach, Alexander; Malkovich, Nick

Electrical conductivity studies of AgI-Ag₂O-B₂O₃-TeO₂ glasses
pp. 3816-3824(9)
Authors: Gowda, V.; Anavekar, R.

Effects of different particle sizes on electrochemical performance of spinel LiMn₂O₄ cathode materials
pp. 3825-3830(6)
Authors: Yi, Ting-Feng; Hu, Xin-Guo; Dai, Chang-Song; Gao, Kun

Physicochemical studies on precipitated magnesium silicates
pp. 3831-3840(10)
Authors: Ciesielczyk, Filip; Krysztafkiewicz, Andrzej; Jesionowski, Teofil

Test of the Anderson-Stuart model and correlation between free volume and the `universal' conductivity in sodium silicate glasses
pp. 3841-3850(10)
Author: Nascimento, Marcio

Crystallite size study of nanocrystalline hydroxyapatite and ceramic system with titanium oxide obtained by dry ball milling
pp. 3851-3855(5)
Authors: Silva, C.; Graça, M.; Valente, M.; Sombra, A.

Fracture behaviour of polypropylene sheets filled with epoxidized natural rubber (ENR)-treated coal gangue powder
pp. 3856-3864(9)
Authors: Li, Bin; Gong, Guan; Xie, Bang-Hu; Yang, Wei; Yang, Ming-Bo; Lai, Sheng-min

Vibration fracture behavior of Sn-9Zn-xCu lead-free solders
pp. 3865-3873(9)
Authors: Hung, Fei-Yi; Lui, Truan-Sheng; Chen, Li-Hui; You, Ji-Ge

Al₂O₃/GdAlO₃ eutectic fibers of high modulus of rupture produced by the laser heated pedestal growth technique
pp. 3874-3877(4)
Authors: Medeiros, Igor; Andreeta, Erika; Hernandes, Antonio

Effects of anodizing conditions on anodic alumina structure
pp. 3878-3882(5)
Authors: Zhao, Nai-Qin; Jiang, Xiao-Xue; Shi, Chun-Sheng; Li, Jia-Jun; Zhao, Zhi-Guo; Du, Xi-Wen

Structural analysis on photopolymerized dental resins containing nanocomponents
pp. 3883-3893(11)
Authors: Discacciati, Jose; Oréfice, Rodrigo

Processing of sucrose to low density carbon foams
pp. 3894-3900(7)
Authors: Prabhakaran, K.; Singh, P.; Gokhale, N.; Sharma, S.

Antagonistic effect of superplasticizer and colloidal nano-silica in the hydration of Alite and Belite pastes
pp. 3901-3907(7)
Authors: Björnström, Joakim; Panas, Itai

Microstructures and mechanical properties of Mg-8Gd-0.6Zr-xNd (x = 0, 1, 2 and 3 mass%) alloys
pp. 3908-3913(6)
Authors: Peng, Qiuming; Wu, Yaoming; Fang, Daqing; Meng, Jian; Wang, Limin

Experimental characterization of the stress-strain behaviour of cemented paste backfill in compression
pp. 3914-3922(9)
Authors: Fall, Mamadou; Belem, T.; Samb, S.; Benzaazoua, M.

Malic acid complex method for preparation of LiNiVO₄ nano-crystallites
pp. 3923-3927(5)
Authors: Thongtem, Titipun; Kaowphong, Sulawan; Thongtem, Somchai

Substitution site effect on structural and dielectric properties of La-Bi modified PZT
pp. 3928-3935(8)
Authors: Goel, Puja; Yadav, K.

Synthesis and nonlinear optical properties of novel Y-type polyurethanes with high thermal stability of dipole alignment
pp. 3936-3943(8)
Authors: Lee, Ju-Yeon; Kim, Jin-Hyang; Jung, Won-Taek; Park, Young

Microconfigured piezoelectric artificial materials for hydrophones
pp. 3944-3950(7)
Authors: Crumm, Aaron; Halloran, John; Silva, Emilio; Montero de Espinosa, Francisco

L1₂-phase cutting during high temperature and low stress creep of a Re-containing Ni-base single crystal superalloy
pp. 3951-3957(7)
Authors: Kostka, A.; Mälzer, G.; Eggeler, G.; Dlouhy, A.; Reese, S.; Mack, T.

Superplastic behavior of coarse-grained Al-Mg-Zn alloys
pp. 3958-3963(6)
Authors: García-Bernal, Marco; Hernandez-Silva, David; Sauce-Rangel, Victor

Syntheses and electronic behaviors of net-worked, alternating hafnium-organic moiety hybrid copolymers
pp. 3964-3968(5)
Authors: Matsui, Hideo; Okada, Akira; Kuroda, Taketoshi; Seguchi, Yasuhiro; Kawahara, Tetsuro; Yoshihara, Masakuni

Influence of texture on the mechanical properties of commercially pure magnesium prepared by powder metallurgy
pp. 3969-3976(8)
Authors: Pérez, P.; Garcés, G.; Adeva, P.

Investigations on surface composition and microstructure of sintered barium titanate
pp. 3977-3984(8)
Authors: Kumar, Sanjiv; Raju, V.; Kutty, T.

DSC study of the effect of milling conditions on the hydrogen storage properties of boron
pp. 3985-3989(5)
Authors: Huang, Zhenguo; Calka, Andrzej; Liu, Huakun

Geopolymer synthesis using silica fume and sodium aluminate
pp. 3990-3993(4)
Authors: Brew, D.; MacKenzie, K.

Retardation of grain growth in electrodeposited Cu by an electric field
pp. 3994-4003(10)
Authors: Jung, Kang; Conrad, Hans

Interface characteristics in diffusion bonding of a γ-TiAl alloy to Ti-6Al-4V
pp. 4004-4008(5)
Authors: Wang, Xiu; Ma, Mo; Liu, Xue; Lin, Jian

Improved visible-light responsive photocatalytic activity of N and Si co-doped titanias
pp. 4009-4017(9)
Authors: Ozaki, Hirotaka; Iwamoto, Shinji; Inoue, Masashi

Synthesis, characterization, and antibacterial activities of novel N-halamine copolymers
pp. 4018-4024(7)
Authors: Chen, Ying; Wang, Li; Yu, Haojie; Shi, Quan; Dong, Xiaochen

Influence of nitriding gases on the growth of boron nitride nanotubes
pp. 4025-4030(6)
Authors: Yu, Jun; Li, Bill; Zou, Jin; Chen, Ying

Formation of TiO₂ nanotubes by thermal decomposition of poly(vinyl alcohol)-titanium alkoxide hybrid nanofibers
pp. 4031-4035(5)
Authors: Nakane, Koji; Shimada, Naoki; Ogihara, Takashi; Ogata, Nobuo; Yamaguchi, Shinji

The effect of varying chill surface roughness on interfacial heat transfer during casting solidification
pp. 4036-4043(8)
Authors: Griffiths, William; Kayikci, Ramazan

Transient liquid phase bonding of steel using an Fe-B interlayer
pp. 4044-4050(7)
Authors: Di Luozzo, Nicolas; Fontana, Marcelo; Arcondo, Bibiana

Superplastic power-law creep of Sn-40%Pb-2.5%Sb peritectic alloy
pp. 4051-4059(9)
Authors: Mahmudi, R.; Rezaee-Bazzaz, A.

Gibbs energy calculation of liquid Zr-Al-Ni and Zr-Al-Cu-Ni alloys with clusters
pp. 4060-4065(6)
Authors: Li, H.; Yang, Y.; Tong, W.; Wang, Z.

Synthesis of ZSM-5 zeolite of improved bulk and surface properties via mixed templates
pp. 4066-4075(10)
Authors: Mohamed, Mohamed; Zidan, F.; Fodail, M.

Materials behaviour and intermetallics characteristics in the reaction between SnAgCu and Sn-Pb solder alloys
pp. 4076-4086(11)
Authors: Liu, Changqing; Huang, Zhiheng; Conway, Paul; Thomson, Rachel

Anodic oxidation of tantalum in water and biological solutions using current limiting constant voltage method
pp. 4087-4097(11)
Author: Wosu, Sylvanus

Laser induced structural and transport properties change in Cu-Zn ferrites
pp. 4098-4109(12)
Authors: Ahmed, M.; Khalil, A.; Solyman, S.

Study of preparation and magnetic properties of silica-coated cobalt ferrite nanocomposites
pp. 4110-4114(5)
Authors: Zhao, Lijun; Yang, Hua; Cui, Yuming; Zhao, Xueping; Feng, Shouhua

Effect of heat treatment in air on the thermal properties of SiC fibre reinforced composite: Part 2 A magnesium aluminium silicate (MAS) matrix glass ceramic composite
pp. 4115-4119(5)
Authors: Yilmaz, R.; Taylor, R.

Reduction of large particles in the fibroin thin films prepared from near-IR pulsed laser deposition by target consolidation
pp. 4120-4123(4)
Authors: Nakayama, Sayuri; Sato, Takaki; Senna, Mamoru