Journal of Materials Science

Editorial
pp. 3287-3287(1)
Author: Stoyanova, Radostina

Particle size effects in Rh/Al₂O₃ catalysts as viewed from a structural, functional, and reactive perspective: the case of the reactive adsorption of NO
pp. 3288-3298(11)
Authors: Newton, Mark; Dent, Andrew; Fiddy, Steven; Jyoti, Bhrat; Evans, John

Oxidation of gold metal particles supported on TiO₂: an FTIR study by means of low-temperature CO adsorption
pp. 3299-3306(8)
Authors: Klimev, Hr.; Fajerwerg, K.; Chakarova, K.; Delannoy, L.; Louis, C.; Hadjiivanov, K.

Effects of morphology and cesium promotion over silver nanoparticles catalysts in the styrene epoxidation
pp. 3307-3314(8)
Authors: Chimentao, Ricardo; Medina, Francesc; Sueiras, Jesús; Fierro, José; Cesteros, Yolanda; Salagre, Pilar

Particle size and support effects on the complete benzene oxidation by Co and Co-Pt catalysts
pp. 3315-3320(6)
Authors: Todorova, Silviya; Kadinov, Georgi; Tenchev, Krasimir; Kalvachev, Yuri; Kostov-Kytin, Vladislav

Effect of preparation technique on the properties of Mo-containing Al-MCM-41
pp. 3321-3325(5)
Authors: Kostova, Nina; Kraleva, Elka; Spojakina, Alla; Godocikova, Erika; Balaz, Peter

Surface modification of macroporous glycidyl methacrylate based copolymers for selective sorption of heavy metals
pp. 3326-3337(12)
Authors: Malović, Ljiljana; Nastasović, Aleksandra; Sandić, Zvjezdana; Marković, Jelena; Đorđević, Dragana; Vuković, Zorica

Hydriding properties of the nanocomposite 85 wt.% Mg-15 wt.% Mg₂Ni_0.8Co_0.2 obtained by ball milling
pp. 3338-3342(5)
Authors: Khrussanova, Maria; Mandzhukova, Tsveta; Grigorova, Eli; Khristov, Mitko; Peshev, Pavel

EPR analysis of the local structure of Ni³⁺ ions in Ni-based electrode materials obtained under high-pressure
pp. 3343-3348(6)
Authors: Zhecheva, Ekaterina; Stoyanova, Radostina; Shinova, Elitza

Influence of the synthesis methods on the particle size of the LiVMoO₆ phase
pp. 3349-3352(4)
Authors: Milanova, Margarita; Iordanova, Reni; Dimitriev, Yanko; Kostov, Krassimir; Vassilev, Sasho

Iron-based composite oxides as alternative negative electrodes for lithium-ion batteries
pp. 3353-3357(5)
Authors: Uzunov, I.; Uzunova, S.; Kovacheva, D.; Vasilev, S.; Puresheva, B.

Tin-based amorphous and composite materials
pp. 3358-3366(9)
Authors: Popova, Ekaterina; Dimitriev, Yanko

Effects of nickel foam dimensions on catalytic activity of supported Co-Mn-B nanocomposites for hydrogen generation from stabilized borohydride solutions
pp. 3367-3372(6)
Authors: Mitov, Mario; Rashkov, Rashko; Atanassov, Nikolay; Zielonka, Andreas

Sol-gel preparation and characterization of perovskite lanthanum lithium titanate
pp. 3373-3377(5)
Authors: Carazeanu Popovici, Ionela; Chirila, Elisabeta; Popescu, Viorica; Ciupina, Victor; Prodan, Gabriel

Nanoparticles in low melting amorphous selenite materials
pp. 3378-3382(5)
Authors: Bachvarova-Nedelcheva, Albena; Iordanova, Reni; Dimitriev, Yanko; Kashchieva, Elena

Polycrystalline materials in MoO₃-ZrO₂-V₂O₅ system
pp. 3383-3387(5)
Authors: Markova-Velichkova, M.; Iordanova, R.; Stoyanova, A.; Dimitriev, Y.; Klissurski, D.

The processing of ultrafine-grained materials through the application of severe plastic deformation
pp. 3388-3397(10)
Author: Langdon, Terence

Synthesis of EVA-g-MAH and its compatibilization effect to PA11/PVC blends
pp. 3398-3407(10)
Authors: Wang, Tao; Liu, Dan; Xiong, Chuanxi

Carbon based conductive polymer composites
pp. 3408-3418(11)
Authors: Zhang, Wei; Dehghani-Sanij, Abbas; Blackburn, Richard

Microscopic structural evolution in terms of porosity in high-Tc superconductors
pp. 3419-3424(6)
Authors: Chakri, Nasr-Eddine; Benaldjia, Abdelaziz; Amara, Abdelaziz; Benloucif, Mohamed; Guerioune, Mohamed

Application of electrochemical techniques in investigation of the role of hydrogen in near-neutral pH stress corrosion cracking of pipelines
pp. 3425-3434(10)
Authors: Cheng, Y.; Niu, L.

Study on the thermal expansion properties of C/C composites
pp. 3435-3439(5)
Authors: Liao, Xiaoling; Li, Hejun; Xu, Wenfeng; Li, Kezhi

A gas phase analysis technique applied to in-situ studies of gas-solid interactions
pp. 3440-3453(14)
Authors: Anghel, Clara; Dong, Qian

Preparation and characterization of cerium oxide templated from activated carbon
pp. 3454-3464(11)
Authors: Crocker, Mark; Graham, Uschi; Gonzalez, Rolando; Jacobs, Gary; Morris, Erin; Rubel, Aurora; Andrews, Rodney

A review of sealing technologies applicable to solid oxide electrolysis cells
pp. 3465-3476(12)
Author: Lessing, Paul

Materials for hydrogen generation via water electrolysis
pp. 3477-3487(11)
Author: Lessing, Paul

SiC_f/SiC composites reinforced by randomly oriented chopped fibers prepared by semi-solid mechanical stirring method and hot pressing
pp. 3488-3494(7)
Authors: Qin, X.; Xiao, B.; Dong, S.; Jiang, D.

Production of natural carotene-dispersed polymer microparticles by SEDS-PA co-precipitation
pp. 3495-3501(7)
Authors: He, Wenzhi; Suo, Quanling; Hong, Hailong; Shan, A; Li, Chunping; Huang, Yanchun; Li, Yunxia; Zhu, Mingda

Preparation and characterisation of controlled porosity alginate hydrogels made via a simultaneous micelle templating and internal gelation process
pp. 3502-3507(6)
Authors: Partap, S.; Muthutantri, A.; Rehman, I.; Davis, G.; Darr, J.

Contact damage initiation in silicon nitride in Hertzian indentation: role of microstructure
pp. 3508-3519(12)
Authors: Lin, Guang-Yong; Lakshminarayanan, Ramaswamy; Shetty, Dinesh

Enhancement of the generating power in Cu/Bi-Te/Cu composite thermoelectric devices
pp. 3520-3528(9)
Authors: Yamashita, Osamu; Odahara, Hirotaka

Adhesion along metal-polymer interfaces during plastic deformation
pp. 3529-3536(8)
Authors: Tijum, R.; Vellinga, W.; Hosson, J.

Dynamic formation of zircon during high temperature deformation of zirconia-silica composites with alumina additions
pp. 3537-3543(7)
Authors: Dillon, R.; Mecartney, Martha

Microstructure and properties of lead-free (Bi_1/2Na_1/2)TiO₃ based piezoelectric ceramics doped with different cations
pp. 3544-3551(8)
Authors: Yu, Zhengbo; Krstic, Vladimir; Mukherjee, Binu

Effect of crystal orientation on the ductility in AZ31 Mg alloy sheets produced by equal channel angular rolling
pp. 3552-3556(5)
Authors: Cheng, Yong; Chen, Zhen; Xia, Wei

Synthesis of monophasic Ce_0.5Zr_0.5O₂ solid solution by microwave-induced combustion method
pp. 3557-3563(7)
Authors: Reddy, Benjaram; Reddy, Gunugunuri; Khan, Ataullah; Ganesh, Ibram

Effect of temperature and surface roughness on the wettability of boron nitride by molten Al
pp. 3564-3568(5)
Authors: Shen, Ping; Fujii, Hidetoshi; Nogi, Kiyoshi

Strain analysis of a GaN epilayer grown on a c-plane sapphire substrate with different growth times
pp. 3569-3572(4)
Authors: Cho, S.; Chang, K.; Kwon, Myoung

Acoustic emission inspection of Portevin-Le Chatelier effect and deformation mechanisms of two Mg-Li-Al alloys
pp. 3573-3579(7)
Authors: Wang, Cong; Li, Zhuoqun; Xu, Yongbo; Han, Enhou

Synthesis and microstructure of SrTiO₃ and BaTiO₃ ceramics by a reaction-sintering process
pp. 3580-3587(8)
Authors: Liou, Yi-Cheng; Wu, Chi-Ting; Chung, Tzu-Chin

Structural analysis of electrodeposited copper microstructures fabricated through template synthesis
pp. 3588-3591(4)
Authors: Kaur, Raminder; Verma, N.; Chakarvarti, S.

Assessment of durability of recycled aggregate concrete produced by two-stage mixing approach
pp. 3592-3602(11)
Authors: Tam, Vivian; Tam, C.

X-Ray diffraction and mössbauer spectra of nickel ferrite prepared by combustion reaction
pp. 3603-3606(4)
Authors: Ramalho, M.; Gama, L.; Antonio, S.; Paiva-Santos, C.; Miola, E.; Kiminami, R.; Costa, A.

Characterization and wear resistance of laser surface cladding AZ91D alloy with Al + Al₂O₃
pp. 3607-3612(6)
Authors: Jun, Yao; Sun, G.; Liu, C.; Jia, S.; Fang, S.

Preparation, characterization, conductivity and thermal expansion studies of Ca_0.5SbMP₃O₁₂ (M = Al, Fe, Cr)
pp. 3613-3620(8)
Authors: Rambabu, G.; Koteswara Rao, K.; Anantharamulu, N.; Raghavender, M.; Prasad, G.; Kumar, V.; Reddy, C.; Vithal, Muga

On flow stress anisotropy in Ti-6Al-4V alloy sheet during superplastic deformation
pp. 3621-3626(6)
Author: Sheikh-Ali, Askar

Synthesis of anisometric KSr₂Nb₅O₁₅ particles in the SrNb₂O₆-Nb₂O₅-KCl system
pp. 3627-3631(5)
Authors: Yang, Zupei; Wei, Lingling; Chang, Yunfei; Liu, Bing

Mechanical properties and rheology of polyalkenoate cements using various low-cost fillers
pp. 3632-3644(13)
Authors: Acosta, Diego; Funkhouser, Gary; Grady, Brain

Prediction of enthalpy of formation and Gibbs energy change in pseudo-binary (Ti-Zr)(Fe-Cr)₂ and pseudo-ternary (Ti-Zr)(Fe-Cr)₂-H system using extended Miedema model
pp. 3645-3650(6)
Authors: Bera, S.; Mazumdar, S.; Ramgopal, M.; Bhattacharyya, S.; Manna, I.

The effect of Ti⁴⁺ ions and gamma radiation on the structure and electrical properties of Mg ferrite
pp. 3651-3660(10)
Authors: Ahmed, M.; Ateia, E.; Salem, F.

Temperature and dwell time effect on hardness of Al-base alloys
pp. 3661-3669(9)
Authors: Abd El-Salam, F.; Wahab, L.; Nada, R.; Zahran, H.

Effect of Li/Nb ratio on structure and photorefractive properties of Zn:Fe:LiNbO₃ crystals
pp. 3670-3674(5)
Authors: Zhen, X.; Li, Q.; Zhao, L.; Xu, Y.

The tensile and creep behavior of Mg-Zn Alloys with and without Y and Zr as ternary elements
pp. 3675-3684(10)
Author: Boehlert, C.

Characterisation of epoxy/BaTiO₃ composites processed by dipping for integral capacitor films (ICF)
pp. 3685-3691(7)
Authors: Ramajo, Leandro; Reboredo, Maria; Castro, Miriam

Synthesis of nanoporous carbons by an in situ template approach
pp. 3692-3694(3)
Authors: Zhang, Li; Wang, Jian-nong; Niu, Jun-jie

Thermal and electrical transport properties of a self-organized carbon nanotube pellet
pp. 3695-3698(4)
Author: Xie, Huaqing